• 한국의학물리학회지:의학물리
• /
• 제28권4호
• /
• pp.144-148
• /
• 2017

When a high density metallic implant is placed in the path of the proton beam, spatial heterogeneity can be caused due to artifacts in three dimensional (3D) computed tomography (CT) scans. These artifacts result in range uncertainty in dose calculation in treatment planning system (TPS). And this uncertainty may cause significant underdosing to the target volume or overdosing to normal tissue beyond the target. In clinical cases, metal implants must be placed in the beam path in order to preserve organ at risk (OARs) and increase target coverage for tumors. So we should introduce Ti-mesh. In this paper, we measured the lateral dose profile for proton beam using an EBT3 film to confirm dosimetric impact of Ti-mesh when the Ti-mesh plate was placed in the proton beam pathway. The effect of Ti-mesh on the proton beam was investigated by comparing the lateral dose profile calculated from TPS with the film-measured value under the same conditions.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.809-812
• /
• 1999

This paper presents the radio propagation effects in the shadow region due to the presence of obstacle, like building and tree, along the path at the B-WLL band. Using the Uniform Theory of Diffraction(UTD), the total field was obtained as the sum of contributions with diffraction ray from the each obstacle's edge, the direct ray, and the reflected rays from ground. The normalized signal level(in ㏈) is calculated with the parameters of the base station elevation and the distance between obstacle and receiver. This results are used to provide the suitable radio cell planning and coverage prediction in the area of shadow region.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권5호
• /
• pp.1929-1950
• /
• 2020

Reliable and secure data transmission in the application environment assisted by the wireless sensor network is one of the major challenges. Problem like blind forwarding and data inaccessibility affect the efficiency of overall infrastructure performance. This paper proposes routing protocol for forwarding and error recovery during packet loss. The same is achieved by energy and hops distance-based formulation of the routing mechanism. The reachability of the intermediate node to the source node is the major factor that helps in improving the lifetime of the network. On the other hand, intelligent hop selection increases the reliability over continuous data transmission. The number of hop count is factor of hop weight and available energy of the node. The comparison over the previous state of the art using QualNet-7.4 network simulator shows the effectiveness of proposed work in terms of overall energy conservation of network and reliable data delivery. The simulation results also show the elimination of blind forwarding and data inaccessibility.

• 대한방사선치료학회지
• /
• 제29권1호
• /
• pp.19-26
• /
• 2017

목 적: 양성자 치료계획에서 metal 재질의 fiducial marker에 의한 선량 계산오차를 최소화하려면 density override의 적용은 매우 중요하다. 하지만 실제 metal 재질로 density override을 할 경우 정확한 contouring 및 range compensator 제작에 어려움이 있기에 본 연구에서는 fiducial marker의 주변 재질로 density override를 시행하고 fiducial marker의 위치, 재질, beam의 개수에 따른 선량분포를 비교, 분석하여 평가하고자 한다. 대상 및 방법: Water phantom을 이용하여 fiducial marker의 위치를 proton beam의 최대 비정 끝에서부터 1.5, 2.5, 4.0, 6.0 cm로 설정하고 재질로는 gold, steel, titanium으로 설정하여 실제 metal 재질 및 주변 재질로 density override를 적용한 치료계획을 세웠다. 또한 본원에서 양성자치료를 받은 간암 환자 1명을 선정하여 proton beam의 최대 비정 끝에서부터 0, 1.5, 3.5 cm로 설정하고 재질로는 gold, steel, titanium으로 설정하여 치료계획을 세웠다. Fiducial marker의 재질, 위치 및 beam의 개수에 따른 PTV 내에 Homogeneity Index(HI), Conformity Index(CI), 종양에 가장 근접한 Organ At Risk(OAR)인 Esophagus의 maximum dose을 평가 지표로 설정하고 비교 분석하였다. 결 과: Water phantom 및 간암 환자를 대상으로 한 치료계획에서 fiducial marker의 위치에 따른 Homogeneity Index를 분석한 결과 실제 metal 재질로 density override 했을 때보다 주변 재질로 density override했을 때 Homogeneity Index가 감소했으며 주변 재질의 density override에서 하나의 beam에 대해서는 최대 비정 끝에서 멀리 위치할수록, 두 개 이상의 beam에서는 isocenter에 가까이 위치할수록 Homogeneity Index가 증가하였다. Fiducial marker의 위치에 따른 Conformity Index 및 종양 주위 OAR의 maximum dose를 분석한 결과 주변 재질로 density override 했을 때 Conformity Index는 1에 가까웠으며 OAR의 maximum dose는 크게 감소했다. 결 론: 일반적으로 임상에서 사용하는 작은 fiducial marker에 대해서 실제 metal 재질이 아닌 주변 재질로 density override 했을 때 선량 균등도 및 target coverage를 높이는 동시에 주변 정상조직에 대한 선량을 줄일 수 있었다. 따라서 fiducial marker을 최대한 피해서 치료계획을 세우는 것이 바람직하지만 beam path 상에 fiducial marker가 있는 경우 주변 재질의 density override 시행함으로써 보다 정밀한 양성자 치료 효과를 기대할 수 있을 것으로 사료된다.

• KIEAE Journal
• /
• 제11권2호
• /
• pp.75-82
• /
• 2011

In Korea, the ratio of population in urban areas used to be only 50.1% in 1970, but with the value risen to 90.8% in 2009, urbanization is going on rapidly. Urbanization, which occurs by the rampantly planted buildings, has become major source of raising building density, changing wind direction and reducing wind amount, and such reductions are affecting even inside the building. In each year, among the total energy consumption in Korea, residential portion takes up significant ratio, and specifically the ratio of apartment house is shown to be highest. In order to solve such problem, many studies are being conducted for the improvement of natural ventilation performance. The natural ventilation performance of apartment house are significantly determined by the characteristics of external and internal structure, but in macroscopic perspective, the performance is established fundamentally by the layout characteristics of the main building of the apartment house in preparation for wind conditions. So far researches on raising the thermal comfort through elevation of ventilation performance have been conducted actively, but many of them propose only theoretical concepts deduced through wind path analysis, and do not include any indicator to measure ventilation performance simply only with area data from layout planning stage. Therefore, in this study, gap ratio a wind field measuring indicator was developed, and after the ventilation characteristics by layout types and main building uniformity were identified, the scope of gap ratio efficient for ventilation and that of uniformity were clarified, followed by verification through simulation.