• Korean Journal of Remote Sensing
• /
• v.26 no.4
• /
• pp.373-385
• /
• 2010

A new method to mosaic reflectivity over the overlapped coverage of two radars was developed. The method mosaics the radar reflectivity with weights after adjustment of reflectivity differences on overlapped coverage of neighboring two radars. Their weights are inverse proportion to the difference between the height of an interpolated reflectivity and the level of CAPPI (Constant Altitude PPI). The performance of this method was compared to different mosaic methods (Mosaics by maximum value, averaged value, nearest value and distance weighted value) using the reflectivity fields of a typhoon event observed by two radar. New method was better than any other methods either as a continuity and as a bias analysis of reflectivity at the boundaries in overlapped coverage by two radars.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.362-368
• /
• 2024

In this paper, we investigated the performance of directional and omnidirectional precoding schemes when transmitting to improve downlink performance in massive MIMO. Omnidirectional precoding was used to broadcast a common signal, such as a synchronization or control signal, to all users. The main purpose of omnidirectional precoding is to design the precoding matrix so that the signal transmitted in the downlink is the same in all directions and emitted with maximum energy. We propose a flexible omnidirectional precoding method for full-dimensional massive MIMO that can set the spatial coverage range to less than 120 degrees. The constraints of omnidirectionality of all antennas, equal transmit power, and maximum transmit rate are used to design the encoding matrix of the proposed method. The performance was evaluated in terms of spatial coverage by considering changing the spatial coverage of the antenna array by changing the distance between neighboring antennas in the antenna array.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.10
• /
• pp.1542-1547
• /
• 2012

Asynchronous phenomenon occurs on the synchronous generators under power system when a generator's amplitude of electromagnetic force, phase angle, frequency and waveform etc become different from those of other synchronous generators which can follow instantly varying speed of turbine. Because the amplitude of electromagnetic force, phase frequency and waveform differ from those of other generators with which are to be put into parallel operation due to the change of excitation condition for load sharing and the sharing load change, if reactive current in the internal circuit circulates among generators, the efficiency varies and the stator winding of generators are overheated by resistance loss. When calculation method of protection settings and logic for protection of generator asynchronization will be recommended, a distance relay scheme is commonly used for backup protection. This scheme, called a step distance protection, is comprised of 3 steps for graded zones having different operating time. As for the conventional step distance protection scheme, zone 2 can exceed the ordinary coverage excessively in case of a transformer protection relay especially. In this case, there can be overlapped protection area from a backup protection relay and, therefore, malfunctions can occur when any fault occurs in the overlapped protection area. Distance relays and overcurrent relays are used for backup protection generally, and both relays have normally this problem, the maloperation, caused by a fault in the overlapped protection area. Corresponding to an IEEE standard, this problem can be solved with the modification of the operating time. On the other hand, in Korea, zones are modified to cope with this problem in some specific conditions. These two methods may not be obvious to handle this problem correctly because these methods, modifying the common rules, can cause another coordination problem. To overcome asynchronizing protection, this paper describes an improved backup protection coordination scheme using a new logic that will be suggested.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.1
• /
• pp.29-38
• /
• 2020

Although educational facilities are important considerations from a social equity standpoint, the educational environment generally found in rural areas has been continuously deteriorated due to numerous social problems following birth rate declines and school abolition numbers. The purpose of this study is to evaluate the commuting accessibility changed by the abolition of elementary schools. The village-level accessibility is assessed following physical accessibility criteria based on legally defined commuting distances. Moreover, this study shows the implications of commuting accessibility by school district zones through comparing the minimum commuting distances with real commuting distance. The target area is the Gangwon state, the coverage area in which for schools is the widest in South Korea (44.1 ㎢/school). We evaluated the commuting distances to the nearest elementary school for 992 rural villages and 74 urban villages. Of the 1,066 villages in urban and rural areas evaluated, most of the villages (about 77%) are exposed to commutes to elementary schools were the marginal distance is over 1,000 meters. The annual rate of increase of commuting distance for 1,066 villages in Gangwon state has steadily increased by 2.8%p since 2000, average commuting distance from 2.8 km to 3.6 km. By the designation of the school districts, elementary school students have to go to a faraway school located within administrative district, even though there is a school nearby. It is expected that the results of this study will be made use of as basic data for the establishment of policies such as a reasonable basis for closing schools measurements considering the locally unique environment.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.91-97
• /
• 2014

In this paper, we propose weighted detection probability with distance between primary user and secondary users by using cooperative spectrum sensing based on energy detection. And we analysis and simulate the result. We suggest different distance between primary user and secondary users and the wireless channel between primary user and secondary users is modeled as Gaussian channel. From the simulation results of the cooperative spectrum sensing with weighted method make coverage bigger compared with non-weight, and We show higher sensing efficiency when we put weight detection probability than before method.

• ALGAE
• /
• v.27 no.4
• /
• pp.283-294
• /
• 2012

The physico-chemical and environmental factors of stoneworks were examined from March 2009 to October 2010, and aerial algae living on 24 stoneworks in Korea were identified. Fifty aerial algae were found in 24 stoneworks. Of the 50 taxa, 30 taxa were cyanophytes, 16 taxa were bacillariophytes, 3 taxa were chlorophytes, and 1 taxon was a xanthophyte. Nine species, including Aphanocapsa rivularis, which is known to only live in aquatic conditions, inhabited both aquatic and aerial environments. Synechococcus aeruginosus, Scytonema coactile var. thermalis, S. coactile var. minor, Stigonema ocellatum f. ocellatum, and Oscillatoria boryana were newly recorded in Korea. As a result of a correlation analysis between algae and the physico-chemical and ecological environmental factors, the taxa were divided into the bryophyte group, the humidity group, and the dry group. Although the bryophyte group was included within the humidity group, it was separated from the dry group. Taxa in the bryophyte group including Nostoc commune which was distributed in more humid areas than those in the humidity group. However, dry group taxa including Chroococcus pallidus were distributed in lower humidity than that of the two other groups. Correlations among other environmental factors were tested to identify other factors that could substitute for humidity and light intensity. As a result, tree distance, water distance, and plant coverage were replaceable environmental factors.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.9
• /
• pp.29-37
• /
• 1998

In weighted random pattern testing it is an important issue to find the optimal weight sets for achieving a high fault coverage using a small number of weighted random patterns. In this paper, a new weight set optimization algorithm is developed, which can generate the optimal weight sets in an efficient way using the sampling probabilities of deterministic tests patterns. In addition, the simulation based method of finding the proper maximum Hamming distance is presented. Experimental results for ISCAS 85 benchmark circuits prove the effectiveness of the new weight set optimization algorithm and the method of finding the proper maximum Hamming distance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1747-1754
• /
• 1997

The helical array antenna is designed for domestic DBS(Directcast Satellite) reception. The antenna diameter is determined 30cm with 168 element s to cover from Moojoo (beam center) to Seoul. The helical antenna with 2-turns and 4.deg. pitch angle is chosen as array elements for good axial ratio and antenna height. In array antenna design, row distance is 0.787.lambda., array distance is 0.824.lambda. in the same row. The feed is constructed using the radial waveguide to decrease the height of antenna. The measured values of the designed antenna are not only satisfied with the design goals but also similar to theoritical values except the axial ratio.

• Korean Journal of Metals and Materials
• /
• v.48 no.4
• /
• pp.363-368
• /
• 2010

N,N'-diphenyl-N,N'-bis(3-methylphenyl)1-1' biphenyl-4,4'-diamine (TPD) hole-transporting layers were deposited using a continuous slot-die coating method on ITO/PET flexible substrates. It is crucial that the substrates have a very smooth surface with a RMS roughness of less than 2 nm for the deposition of semiconductor nanocrystals or Quantum Dots. The parameters of the slot-die coating, including the solution concentration of the TPD, the gap between the slot-die and the substrates, and the coating speed were controlled in these experiments. To obtain full coverage of the TPD films on the ITO/PET substrates (40 mm wide and several meters long), the injection rates of the TPD solution were increased proportional to the coating speed of the flexible substrates. Additionally, the injection rates must be increased as the gap distance changes from 400 to 600 ${\mu}m$ at the same coating speed. A RMS surface roughness of less than 2 nm was obtained, in contrast to bare ITO/PET substrates, at 13 nm, as the coating speed and gap distance increased.

• Current Photovoltaic Research
• /
• v.10 no.4
• /
• pp.121-132
• /
• 2022

The need for floating photovoltaic is being emphasized to expand renewable energy but low residents' acceptance is a major obstacle to the deployment of floating photovoltaic. Using the discrete choice experiment, this study analyzed the preferences for community-based floating photovoltaic projects and proposed a method to increase the residents' acceptance of floating photovoltaic projects. The estimates of the marginal willingness to accept (MWTA) of the distance, the coverage ratio, the landscape, the project owner (public institution), and the project owner (large company) are -0.69%p/km, 0.13%p/%p, -0.57%p, -2.95%p, -1.73%p, respectively. According to the result of simulation analysis, the residents' acceptance is significantly higher when the project is operated by a public institution, with a choice probability of 58%, than when the project is operated by a private company, with a choice probability of 29%, 12% for a large and small company, respectively. In addition, as a result of the analysis of the expected returns, the results show that the closer the distance from the residence to the power plant, the higher the expected return.