• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.441-444
• /
• 2008

This paper describes the development of a circularly polarized microstrip antenna, as a part of the Circularly Polarized Synthetic Aperture Radar (CP-SAR) sensor which is currently under developed at the Microwave Remote Sensing Laboratory (MRSL) in Chiba University. CP-SAR is a new type of sensor developed for the purpose of remote sensing. With this sensor, lower-noise data/image will be obtained due to the absence of depolarization problems from propagation encounter in linearly polarized synthetic aperture radar. As well the data/images obtained will be investigated as the Axial Ratio Image (ARI), which is a new data that hopefully will reveal unique various backscattering characteristics. The sensor will be mounted on an Unmanned Aerial Vehicle (UAV) which will be aimed for fundamental research and applications. The microstrip antenna works in the frequency of 1.27 GHz (L-Band). The microstrip antenna utilized the proximity-coupled method of feeding. Initially, the optimization process of the single patch antenna design involving modifying the microstrip line feed to yield a high gain (above 5 dBi) and low return loss (below -10 dB). A minimum of 10 MHz bandwidth is targeted at below 3 dB of Axial Ratio for the circularly polarized antenna. A planar array from the single patch is formed next. Consideration for the array design is the beam radiation pattern in the azimuth and elevation plane which is specified based on the electrical and mechanical constraints of the UAV CP-SAR system. This research will contribute in the field of radar for remote sensing technology. The potential application is for landcover, disaster monitoring, snow cover, and oceanography mapping.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.301-304
• /
• 2008

Since longer wavelength microwave radiation can penetrate clouds, satellite passive microwave sensors can observe sea ice of the entire polar region on a daily basis. Thus, it is becoming popular to derive sea ice motion vectors from a pair of satellite passive microwave sensor images observed at one or few day interval. Usually, the accuracies of derived vectors are validated by comparing with the position data of drifting buoys. However, the number of buoys for validation is always quite limited compared to a large number of vectors derived from satellite images. In this study, the sea ice motion vectors automatically derived from pairs of AMSR-E 89GHz images (IFOV = 3.5 ${\times}$ 5.9km) by an image-to-image cross correlation were validated by comparing with sea ice motion vectors manually derived from pairs of cloudless MODIS images (IFOV=250 ${\times}$ 250m). Since AMSR-E and MODIS are both on the same Aqua satellite of NASA, the observation time of both sensors are the same. The relative errors of AMSR-E vectors against MODIS vectors were calculated. The accuracy validation has been conducted for 5 scenes. If we accept relative error of less than 30% as correct vectors, 75% to 92% of AMSR-E vectors derived from one scene were correct. On the other hand, the percentage of correct sea ice vectors derived from a pair of SSM/I 85GHz images (IFOV = 15 ${\times}$ 13km) observed nearly simultaneously with one of the AMSR-E images was 46%. The difference of the accuracy between AMSR-E and SSM/I is reflecting the difference of IFOV. The accuracies of H and V polarization were different from scene to scene, which may reflect the difference of sea ice distributions and their snow cover of each scene.

• Journal of Korean Society of Forest Science
• /
• v.97 no.4
• /
• pp.445-451
• /
• 2008

This study was carried out to develop Tablet PC based customizing system for fine mapping of forest cover type. The major contents and characteristics of FIS developed in this study were as follows. Field Investigation System (FIS) has a merit of accessibility to display exact location in various spatial data with position information received from the GPS. FIS can be used to record and manage many field information on which field investigation is done, with the help of the memo tool, field-sheet tool, calculating distance and area with measuring tool as well as editing forest type. It is possible to do field investigation effectively using FIS developed in this study. Accordingly, investigation and time costs can be reduced and field-work productivity will be improved.

• Journal of Korea Multimedia Society
• /
• v.9 no.2
• /
• pp.215-225
• /
• 2006

Binary images, such as cartoon character images, text images and signature images, which consist of two values with black and white have more difficulties inserting imperceptible secret data than color images. Steganography using binary cover images is not easy to satisfy requirements for both the imperceptibility of stego images and a high embedding rate of secret data at the same time. In this paper, we propose a scheme that can get both the high quality of stego images and a high embedding rate by supplementing the advantages of previous research. In addition, the insertion of the proposed method changes only existing pixels of the imperceptible position and can embed the secret data of [$log_2(mn+1)-2$] bits in a block with size of $m{\times}n$.

• Journal of Korean Society of Rural Planning
• /
• v.15 no.4
• /
• pp.199-211
• /
• 2009

The aim of this paper is to investigate the applicability of high spatial resolution remote sensing images for conducting the rural amenity resources survey. There are a large number of rural amenity resources and field reconnaissance without a sufficient preliminary survey involves a big amount of cost and time even if the data quality cannot always be satisfied with the advanced study. Therefore, a new approach should be considered like the state-of-the-art remote sensing technology to support field survey of rural amenity resources as well as to identify the spatial attributes including the geographical location, pathway, area, and shape. Generally high-resolution satellite or aerial photo images are too expensive to cover a large area and not free of meteorological conditions, but recently rapidly-advanced internet-based image services, such as Google Earth, Microsoft Bing maps, Bluebirds, Daum maps, and so on, are expected to overcome the handicaps. The review of the different services shows that Google Earth would be the most feasible alternative for the survey of rural amenity resources in that it provides powerful tools to build spatial features and the attributes and the data format is completely compatible with other GIS(Geographic information system) software. Hence, this study tried to apply the Google Earth service to interpret the amenity resources and proposed the reformed work process conjugating the internet-based high-resolution images like satellite and aerial photo data.

• Korean Journal of Remote Sensing
• /
• v.36 no.1
• /
• pp.15-27
• /
• 2020

Accurate knowledge of land use/land cover (LULC) features and their relative changes over upon the time are essential for sustainable urban management. Urban sprawl growth has been always also a worldwide concern that needs to carefully monitor particularly in a developing country where unplanned building constriction has been expanding at a high rate. Recently, remotely sensed imageries with a very high spatial/spectral resolution and state of the art machine learning approaches sent the urban classification and growth monitoring to a higher level. In this research, we classified the Quickbird satellite imagery by object-based image analysis of Dempster-Shafer (OBIA-DS) for the years of 2002 and 2015 at Karbala-Iraq. The real LULC changes including, residential sprawl expansion, amongst these years, were identified via change detection procedure. In accordance with extracted features of LULC and detected trend of urban pattern, the future LULC dynamic was simulated by using land transformation model (LTM) in geospatial information system (GIS) platform. Both classification and prediction stages were successfully validated using ground control points (GCPs) through accuracy assessment metric of Kappa coefficient that indicated 0.87 and 0.91 for 2002 and 2015 classification as well as 0.79 for prediction part. Detail results revealed a substantial growth in building over fifteen years that mostly replaced by agriculture and orchard field. The prediction scenario of LULC sprawl development for 2030 revealed a substantial decline in green and agriculture land as well as an extensive increment in build-up area especially at the countryside of the city without following the residential pattern standard. The proposed method helps urban decision-makers to identify the detail temporal-spatial growth pattern of highly populated cities like Karbala. Additionally, the results of this study can be considered as a probable future map in order to design enough future social services and amenities for the local inhabitants.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.73-74
• /
• 2009

This study attempts to establish a system extracting and monitoring cultural grounds of seaweeds (lavers, brown seaweeds and seaweed fulvescens) and abalone on the basis of both KOMPSAT-2 and Terrasar-X data. The study areas are located in the northwest and southwest coast of South Korea, famous for coastal cultural grounds. The northwest site is in a high tidal range area (on the average, 6.1 m in Asan Bay) and has laver cultural grounds for the most. An semi-automatic detection system of laver facilities is described and assessed for spaceborne optic images. On the other hand, the southwest cost is most famous for seaweeds. Aquaculture facilities, which cover extensive portions of this area, can be subdivided into three major groups: brown seaweeds, capsosiphon fulvescens and abalone farms. The study is based on interpretation of optic and SAR satellite data and a detailed image analysis procedure is described here. On May 25 and June 2, 2008 the TerraSAR-X radar satellite took some images of the area. SAR data are unique for mapping those farms. In case of abalone farms, the backscatters from surrounding dykes allows for recognition and separation of abalone ponds from all other water-covered surfaces. But identification of seaweeds such as laver, brown seaweeds and seaweed fulvescens depends on the dampening effect due to the presence of the facilities and is a complex task because objects that resemble seaweeds frequently occur, particularly in low wind or tidal conditions. Lastly, fusion of SAR and optic spatial images is tested to enhance the detection of aquaculture facilities by using the panchromatic image with spatial resolution 1 meter and the corresponding multi-spectral, with spatial resolution 4 meters and 4 spectrum bands, from KOMPSAT-2. The mapping accuracy achieved for farms will be estimated and discussed after field verification of preliminary results.

• Korean Journal of Remote Sensing
• /
• v.33 no.3
• /
• pp.325-331
• /
• 2017

In this study, digital elevation models(DEM) of tidal flat, according to different times, was produced by means of the Drone and commercial software in order to measure seawater change during high tide at water-channel in the Hampyung Bay. To correct the produced DEMs of the tidal flat where is inaccessible to collect control points, the DEM matching method was applied by using the reference DEM, that is previously obtained, instead of the survey. After the ortho-image was made from the corrected DEM, the land cover classified image was produced. The changes of seawater amount according to the times were analyzed by using the classified images and DEMs. As a result, it was confirmed that the amount of water rapidly increased as the time passed during high tide.

• Korean Journal of Remote Sensing
• /
• v.35 no.1
• /
• pp.39-55
• /
• 2019

In this study, we have proposed an improved method to detect forest fires by correcting the reflected signals of day images using the middle-wavelength infrared (MWIR) channel. The proposed method is allowed to remove the reflected signals only using the image itself without an existing data source such as a land-cover map or atmospheric data. It includes the processing steps for calculating a solar-reflected signal such as 1) a simple correction model of the atmospheric transmittance for the MWIR channel and 2) calculating the image-based reflectance. We tested the performance of the method using the MODIS product. When compared to the conventional MODIS fire detection algorithm (MOD14 collection 6), the total number of detected fires was improved by approximately 17%. Most of all, the detection of fires improved by approximately 30% in the high reflection areas of the images. Moreover, the false alarm caused by artificial objects was clearly reduced and a confidence level analysis of the undetected fires showed that the proposed method had much better performance. The proposed method would be applicable to most satellite sensors with MWIR and thermal infrared channels. Especially for geostationary satellites such as GOES-R, HIMAWARI-8/9 and GeoKompsat-2A, the short acquisition time would greatly improve the performance of the proposed fire detection algorithm because reflected signals in the geostationary satellite images frequently vary according to solar zenith angle.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.9
• /
• pp.157-167
• /
• 2022

This study attempted to investigate what kind of perception people in their 20s have about masks and to find out the characteristics of each type by categorizing the perception. The Q methodology was used for the study. The cognition types of masks were categorized into three. Type 1 was a 'always wear impact-important type' that always wears masks and thinks masks affect non-verbal communication and the wearer's image. Type 2 was a 'function-important negative recognition type' that wears masks to prevent germs and thinks that masks have a great negative impact. Type 3 was a 'concealment wear positive image type' that wears a mask to cover the face and thinks that a person looks young when wearing a mask. It is thought that the development of masks of various designs and functions reflecting the needs of consumers should be carried out. Also, it is thought that various products should be developed and sold so that consumers can choose according to important considerations such as design, fit, and function.