• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.79-83
• /
• 2005

SEA is a useful tool to predict noise and vibration response in high frequency region but has a weak point not to be able to express modal behavior in low frequency region. For a structure with middle subsystem having relatively higher modal density than excited subsystem and receiving subsystem, we studied the possibility that the modal behavior of receiving subsystem can express by considering finite mobility of excited subsystem. For a simply three-coupled beams which is chosen for feasibility study, the response of receiving beam was investigated with varying the length & area moment of inertia of middle beam. In case that the middle beam has relatively higher modal density than exciting beam, the application to finite mobility of excited beam led to express modal behavior of receiving beam relatively well.

• Journal of Ceramic Processing Research
• /
• 제13권spc2호
• /
• pp.174-176
• /
• 2012

Piezoelectric 0.93(Na0.5K0.5)NbO3-0.07BiTiO3 (NKN-BTO) ceramics were fabricated by the mixed-oxide method and their structural and dielectric properties was investigated with the variation of sintering temperature. All specimens were crystallized in the perovskite single phase without any formation of a second phase such as pyrochlore. The average grain size of the NKN-BTO specimen sintered at 1130 ℃ is 0.32 ㎛. The specimen sintered at 1100 ℃ showed the highest relative density of 98%. Electromechanical coupling factor, relative dielectric constant and dielectric loss of the NKN-BTO specimens sintered at 1110 ℃ were 0.31, 1222 and 0.02, respectively. Curie temperature of the specimen sintered at 1110 ℃ was 445 ℃.

• 한국전기전자재료학회논문지
• /
• 제20권9호
• /
• pp.766-770
• /
• 2007

In this study, in order to develop low temperature sintering ceramics for multilayer piezoelectric actuator, $0.07Pb(Mn_{1/3}Nb_{2/3})O_3-xPb(Ni_{1/3}Nb_{2/3})O_3-(0.93-x)Pb(Zr,Ti)O_3$ ceramics system were fabricated using $Li_2CO_3-Bi_2O_3-CuO$ sintering aids and the specimens were sintered at $930^{\circ}C$. Thereafter, their piezoelectric and dielectric characteristics were investigated according to the amount of PNN substitution. At 9 mol% PNN substitution, density, electromechanical coupling factor ($k_p$), dielectric constant, mechanical quality factor ($Q_m$) and piezoelectric constant ($d_{33}$) showed the optimum value of $7.86g/cm^3$, 0.60, 1640, 1323 and 387 pC/N, respectively. It is considered that these values are suitable for piezoelectric divece application such ad multilayer piezoelectric actuator and ultrasonic vibrator with pure Ag internal electrode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1991년도 추계학술대회 논문집
• /
• pp.68-72
• /
• 1991

In this study, to improve temperature stability 0.05 Pb(Sn$\_$$\frac{1}{2}$/Sb$\_$$\frac{1}{2}$/O$_3$ - 0.35PbTiO$_3$ - 0.60PbZrO$_3$ + 0.4[wt%]MnO$_2$ piezoelctric oeramics of low dielectric constant and large mechanical quality factor were manufactured with the addition of Cr$_2$O$_3$by Hot Press method. And the SAW delay line was fabricated and the propagation characteristics of SAW was investigated, and the SAW filter was fabricated on C4 added by 0.2[wt%] Cr$_2$O$_3$and its frequency characteristics was investigated. The specimen, whose propagation characteristics of surface acoustic wave were the best, was C4 added by 0.2[wt%] Cr$_2$O$_3$, and its electromechanical coupling factor(ks$^2$) was 3.11[%] and its temperature coefficient of the center frequency (C$\_$fo/) was -21.27[ppm/$^{\circ}C$]. The 31[MHz] SAW IF filter of C4 scarcely had diffraction phenomena and its group delay time was 1.4673 ${\pm}$40[ns] in the pass band, and the insertion loss was -24.419[dB] on no impedance matching.

• 한국전기전자재료학회논문지
• /
• 제20권12호
• /
• pp.1039-1043
• /
• 2007

In this paper, in order to develop low temperature sintering ceramics for multilayer piezoelectric actuator application, PMN-PZN-PZT ceramics were fabricated using $LiCO_3,\;Bi_2O_3$ and CuO as sintering aids. And also, their piezoelectric and dielectric properties were investigated according to the milling time. All the specimens sintered at $930\;^{\circ}C$ showed tetragonal phases without secondary phases. With increasing milling time, piezoelectric and dielectric characteristic of specimens increased up to 60 hours milling time and then decreased due to the agglomeration of fine particle. Accordingly, it seems that 60 hour is optimum milling condition. At the sintering temperature of $930\;^{\circ}C$ and milling time of 60 hour, density, dielectric constant(${\varepsilon}_r$), electromechanical coupling factor (kp), mechanical quality factor (Qm), piezoelectric d constant showed the optimum value of $7.95\;g/m^3$, 1382, 0.546, 1749, 330 pC/N, respectively for multilayer piezoelectric actuator application.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.60-63
• /
• 1997

Dieletric ailed piezoelectric properties of Pb[$Zr_{0.45}$/ $Ti_{0.5-x}$/L $u_{x}$ (M $n_{1}$3//S $b_{2}$3)$_{0.05}$] $O_3$(0$\leq$x $\leq$0.03) were investigated. The partial substitution of $Ti^{4+}$ by a L $u^{3+}$ permitted improvement of the piezoelectric constant( $d_{33}$ ), electromechanical coupling factor ( $k_{p}$ ) and dielectric constant($\varepsilon$$_{33}$ /Sup T/). The dielectric loss(tan $\delta$ ) increased and mechanical quality factor(Qm) decreased with an increase of x were observed. A new piezoelectric material for actuator application was developed at x=0.02 with $d_{33}$ =370$\times$10$^{-2}$ /C/N, $k_{p}$ =58.5%, $\varepsilon$$_{33}$ $^{T}$ =1321, $Q_{m}$ =714 and tan $\delta$ =0.98%.%..%.%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.117-120
• /
• 2004

The dielectric and piezoelectric properties of silver doped $Pb(Zr,Ti)O_3-Pb(Mn,W,Sb,Nb)O_3$ ceramics was examined. By varying the contents of silver(0.0, 0.4, 1.0 mol%), the effect of doped silver on PZT-PMWSN thin film was investigated at various sintering temperature(900, 1000, $1100^{\circ}C$). As increasing silver contents, the relative dielectric constant is increased and sinterbility is enhanced. At the specimen with 0.4 mol% Ag and sintered at $1100^{\circ}C$, electromechanical coupling factor(kp), mechanical quality factor(Qm), dielectric constant(${\varepsilon}r$) and dielectric loss were 0.502, 811, 991, 0.006, respectively. The results show that the PZT-PMWSN/Ag composites have enhanced piezoelectic and dielectric properties and processing condition is improved.

• 한국항행학회논문지
• /
• 제22권1호
• /
• pp.27-30
• /
• 2018

본 연구에서는, 밀리미터파 무선 통신 시스템 응용을 위하여 hairpin 구조를 응용한 40 GHz 대역통과 여파기 (BPF; band pass filter)를 설계 및 제작하여 그 특성을 측정하였다. 3차원 전자계분석 툴과 hairpin BPF 설계 수식을 이용하여, 비유전율 2.2와 5 mil 두께의 Duroid (RT5880) 기판에 BPF를 설계하였다. 입 출력단에서 U-shape 공진기의 tapping 위치(t)는 external Q-factor ($Q_e$)를 추출하여 결정하였고, 다른 공진기들 사이의 커플링 계수는 필터 특성을 고려하면서 물리적 치수를 조정하여 결정하였다. 제작된 hairpin BPF는 probe station에서 probing 방법으로 측정하였고, 중심 주파수와 대역폭은 각각 41.61 GHz 그리고 7.43 %으로 나타났다. 측정된 입력 및 출력 반사 손실은 통과 대역에서 -10 dB 이하 이고 측정된 삽입손실은 -3.94 dB이다. 제작된 여파기의 크기는 $9.1{\times}2.8mm^2$ 이다.

• 센서학회지
• /
• 제6권5호
• /
• pp.392-399
• /
• 1997

본 연구에서는 $0.125Pb(Mg_{1/2}Nb_{2/3})O_{3}-0.435PbTiO_{3}-0.44PbZrO_{3}$의 조성을 갖는 hard계 압전 재료에 0.5 wt%의 $MnO_{2}$를 첨가하였으며, 이 시편으로 초음파 전동기를 제작하고자, 소결 온도에 따른 시편의 유전 및 압전특성에 대하여 연구하였다. 실험 결과, $1270^{\circ}C$의 소결 온도에서 다음과 같이 가장 우수한 압전특성을 나타냈다. 즉 시편의 밀도는 $7.72\;g/cm^{3}$ 유전상수는 570, 유전손실은 0.82 %f, 잔류분극 Pr은 $19.18{\mu}C/cm^{2}$ 항전계 Ec는 9.63 kW/cm, 전기기계 결합계수 kp는 55.1%, 기계적 품질계수 Qm은 886이 되었다. 또한 $1270^{\circ}C$ 에서 소결된 시편의 유전상수 및 유전손실을 주파수 변화와 온도 변화에 따라 조사하였다.

• 한국광학회지
• /
• 제16권4호
• /
• pp.384-391
• /
• 2005

본 논문에서는 나노 임프린트 기술을 이용한 폴리머 링 광공진기를 제안하고 구현하였다. 공진기 역할을 하는 링 도파로에서의 전파손실과 링 및 버스 도파로 간의 광파워 결합계수를 빔전파방법을 도입하여 계산하였으며, 또한 전달 매트릭스 방법을 도입하여 이들이 소자에 미치는 영향을 분석하고 소자를 설계하였다. 특히, smoothing buffor layer를 갖는 임프린트용 스탬프를 도입하여 다음과 같은 성과를 얻을 수 있었다. 먼저 식각공정으로 얻어진 스탬프 상의 도파로 패턴의 측면 거칠기를 링 도파로의 산란손실을 개선함으로써 Q값을 획기적으로 향상시켰다. 또한, 결합영역에서 버스와 링 도파로 간의 간격을 기존 lithography 공정에서는 불가능하였던 $0.2{\mu}m$정도까지 효과적으로 줄이고 제어함으로써 링과 도파로 간의 광파워 결합을 정밀하게 조절할 수 있게 되었다. 제작된 소자의 성능을 살펴보면, 링 반경이 $200{\mu}m$인 경우에 대해 1550 nm 파장 대역에서 Q값은 ~103800이고, 소멸비는 ~11 dB, free spectral range는 1.16 nm였다.