• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.90-101
• /
• 1996

Determination of assembly sequence of components is a key issue in assembly operation. Although a number of articles dealing with assembly sequence determination have appeared, an efficient and general methodology for complex products has yet to appear. The objective of this paper is to present the problems and models used to generate assembly sequence from design data. An essential idea of this research is to acquire a finite number of voxels from any complex geometric entity, such as 3D planar polygons, hollow spheres, cylinders. cones, tori, etc. In order to find a feasible assembly sequence, the following four steps are needed: (1) The components composing of an assembly product are identified and then the geometric entities of each component are extracted. (2) The geometric entities extracted in the first step are translated into a number of voxels. (3) All the mating or coupling relations between components are found by considering relations between voxels. (4) The components to be disassembled are determined using CCGs (Component Coupling Graph).

• 정보처리학회논문지D
• /
• 제11D권3호
• /
• pp.625-634
• /
• 2004

컴포넌트 아키텍쳐 설계를 위하여 재사용 가능한 독립적인 비즈니스 컴포넌트의 식별은 컴포넌트 기반 시스템 구축을 위하여 가장 중요한 작업이다. 그러나 기존 컴포넌트 기반 개발 방법론들의 컴포넌트 시별 방법은 대다수 개발자의 직관과 경험에 의존하고 있다. 또한 개발자들에 의해서 식별된 컴포넌트가 보다 독립적으로 잘 정의되었는지 평가할 기준이 없다. 따라서 본 논문에서는 개발자의 직관과 경험에 의존하는 비즈니스 컴포넌트 식별의 어려운 점을 보완하기 위하여 비즈니스 컴포넌트 식별의 평가 기준이 되는 메트릭을 컴포넌트의 특성을 부여하여 정의한다. 즉, 비즈니스 컴포넌트 식별을 위하여 컴포넌트 내의 응집도는 높고 컴포넌트 간의 결합도는 낮아야 하는 컴포넌트 특성을 적용한 응집척도와 결합척도를 제안한다. 또한 컴포넌트의 응집도와 결함도의 비율에 의하여 비즈니스 컴포넌트의 독립의 정도를 평가할 수 있는 독립척도를 제안한다. 본 논문에서 제안한 응집척도, 결합척도 그리고 독립척도를 사례에 적용하여 그 효율성을 평가한다.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권1호
• /
• pp.2-8
• /
• 2002

This paper discusses haptic display for grasping a virtual object by two fingers. Much research has been done on fundamental analysis for stability of haptic display. But it is difficult to apply the results immediately to grasping situations by two fingers, since the studies usually deal with a single device and a single object and the fingertip force in grasping situations has two components, internal and external components. The conventional methods, which specify the coupling impedance at each contact point separately, have no other alternative but to specify the impedance for the sum of the internal and external components. So even if only the impedance for the external force should be changed, the impedance for the internal force is also changed at the same time. In this paper, a new method, in which the coupling impedance is specified separately for the internal and external forces, is proposed and the stability of the proposed method is discussed using passivity analysis for 1 -DOF(Degree-Of-Freedom) system. Finally, some experiments are performed to study the effects of the proposed method.

• 자연과학논문집
• /
• 제17권1호
• /
• pp.31-37
• /
• 2006

We have found that the polarization mode coupling between the orthogonally linearly polarized dual mode laser results from the anisotropy of dipole moments. Rate equation analysis demonstrated that high anisotropy in dipole moment components can give rise to law intrinsic mode coupling constants while isotropic dipole moment components give high intrinsic mode coupling constant. The populations at active ion sites are shown to self-organize the populations such that laser mode gain is constant adove threshold while the gain contributions from the each site adjust themselves with pump power.

• Wind and Structures
• /
• 제14권3호
• /
• pp.239-252
• /
• 2011

The wind-induced mean, background and resonant responses of Beijing National Stadium are investigated in this paper. Based on the concepts of potential and kinetic energies, the mode participation factors for the background and the resonant components are presented and the dominant modes are identified. The coupling effect between different modes of the resonant response and the coupling effect between the background and resonant responses are analyzed. The coupling effects between the background and resonant components and between different modes are found all negligible. The mean response is approximately analogous to the peak responses induced by the fluctuating wind. The background responses are significant in the fluctuating responses and it is much larger than the resonant responses at the measurement locations.

• 정보처리학회논문지D
• /
• 제12D권4호
• /
• pp.609-616
• /
• 2005

소프트웨어 개발의 높은 생산성을 향상시키기 위한 재사용 기술로 컴포넌트 기반 개발 방법론은 널리 사용되게 되었다. 컴포넌트의 재사용을 향상시키기 위해서는 설계된 컴포넌트가 측정가능 해야 하므로 컴포넌트의 품질을 정량적으로 평가할 메트릭스가 필요하다. 따라서 본 논문에서는 컴포넌트의 특성을 반영한 컴포넌트의 결합도 메트릭을 제안한다. 또한 제안된 결합도 메트릭의 정확성을 검증하기 위해 사례연구를 제시하고 기존 결합도 메트릭스와의 비교 분석 결과를 제시한다. 제안된 결합도 메트릭은 좀 더 정확하게 컴포넌트의 품질을 평가하고 Briand이 제시한 결합도 메트릭의 필요조건을 만족한다.

• 국제초고층학회논문집
• /
• 제10권3호
• /
• pp.211-218
• /
• 2021

A new type of earthquake resilient reinforced concrete (RC) shear wall structure, installed with replaceable coupling beams and replaceable corner components at the bottom of wall piers, is proposed in this study. At first, the mechanical behavior of replaceable components, such as combined dampers and replaceable corner component, is studied by cyclic loading tests on them. Then, cycling loading tests are conducted on one conventional coupled shear wall and one new type of coupled shear wall with replaceable components. The test results indicate that the damage of the new type of coupled shear wall concentrates on replaceable components and the left parts are well protected. Finally, a case study is introduced. The responses of one conventional frame-tube structure and one new type of structure installed with replaceable components under the wind and the earthquake are compared, which verify that the performance of new type of structure is much better than the conventional structure.

• 디지털산업정보학회논문지
• /
• 제7권3호
• /
• pp.37-42
• /
• 2011

Nowadays software developers are moving from conventional software process technologies to the object-oriented paradigm. To develope the object-oriented softwares efficiently, various software metrics have been suggested. Coupling refers to the degree of independence between components of the system. It has long been well known that good software practice calls for minimizing coupling interaction. Many researches have been studied coupling metrics of the object- oriented systems. We review Chidamber and Kemerer's work & Li's work. In this paper, we study the coupling of the overall structures of object-oriented systems by analyzing the class diagram of UML. We propose four coupling metrics for object-oriented softwares. First, we use an established coupling metric for object- oriented systems as a basic coupling metric. Then we modify the basic coupling metric by including indirect coupling between classes, We also suggest two relative coupling metrics to measure coupling between subsystems. We investigate the theoretical soundness of the proposed metrics by the axioms of Briand et al. Finally, we apply the presented metrics to a practical case study. This coupling metric will be helpful to the software developers for their designing tasks by evaluating the coupling metric of the structures of object-oriented system and redesigning tasks of the system.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.863-867
• /
• 2013

A series of azo disperse dyes having dicyanovinyl groups was synthesized by the Knoevenagel condensation with malononitrile from carbonyl substituted phenylazo disperse dyes which were prepared by conventional diazo coupling reaction of aniline derivatives as diazo components. A variety of coupling components such as anilines, an indole and a pyridone were used. The azo disperse dyes were evaluated for their spectral properties and dyeing assessment on the polyester fabrics. The azo disperse dyes containing dicyanovinyl groups showed bathochromic shifts and darker colors due to increased electron withdrawing strength in their azo components and extended conjugation by dicyanovinyl groups than their parent carbonyl substituted azo dyes. The dyes containing 2-acetylamino-5-methoxy substituent in the coupling component exhibited higher wavelength of maximum absorbance (${\lambda}_{max}$) and significant negative solvatochromism than those of other dyes due to intramolecular hydrogen bonding.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.91-99
• /
• 2017

In order to meet the thermal performance analysis accuracy requirements of high density permanent magnet synchronous motor (PMSM), a method of multi physical domain coupling thermal analysis based on control circuit, electromagnetic and thermal is presented. The circuit, electromagnetic, fluid, temperature and other physical domain are integrated and the temperature rise calculation method that considers the harmonic loss on the frequency conversion control as well as the loss non-uniformly distributed and directly mapped to the temperature field is closer to the actual situation. The key is to obtain the motor parameters, the realization of the vector control circuit and the accurate calculation and mapping of the loss. Taking a 48 slots 8 poles high density PMSM as an example, the temperature rise distribution of the key components is simulated, and the experimental platform is built. The temperature of the key components of the prototype machine is tested, which is in agreement with the simulation results. The validity and accuracy of the multi physical domain coupling thermal analysis method are verified.