• 제목/요약/키워드: Coupled-Mode Theory (CMT)

검색결과 6건 처리시간 0.018초

Time-Domain Analysis of Wireless Power Transfer System Behavior Based on Coupled-Mode Theory

  • Shim, Hyunjin;Nam, Sangwook;Lee, Bomson
    • Journal of electromagnetic engineering and science
    • /
    • 제16권4호
    • /
    • pp.219-224
    • /
    • 2016
  • In this paper, coupled-mode theory (CMT) is used to obtain a transient solution analytically for a wireless power transfer system (WPTS) when unit energy is applied to one of two resonators. The solutions are compared with those obtained using equivalent circuit-based analysis. The time-domain CMT is accurate only when resonant coils are weakly coupled and have large quality factors, and the reason for this inaccuracy is outlined. Even though the time-domain CMT solution does not describe the WPTS behavior precisely, it is accurate enough to allow for an understanding of the mechanism of energy exchange between two resonators qualitatively. Based on the time-domain CMT solution, the critical coupling coefficient is derived and a criterion is suggested for distinguishing inductive coupling and magnetic resonance coupling of the WPTS.

불연속 입력 경계면과 전송 손실이 있는 광 편파기 설계를 위한 새로운 편파조건 (Novel Polarization Condition of Optical Polarized Beamsplitter with Misaligned Input Interface and Guiding Loss)

  • 호광춘
    • 전기전자학회논문지
    • /
    • 제11권1호통권20호
    • /
    • pp.61-68
    • /
    • 2007
  • 모드 전송선로 이론을 이용하여 불연속 입력경계면을 갖는 TE-TM 모드 광 편파기의 편파특성을 정확하게 분석하였다. 제안한 해석법의 타당성 및 정확성을 분석하기 위하여 새로운 편파조건을 정의하였으며, 기존에 널리 사용하여 왔던 결합모드 이론 의 편파조건과 비교 분석하였다. 분석 결과, 불연속 입력경계면의 분연속 특성은 광 편파기의 편파조건에 영향을 주지 않았으나, 결합특성이 약하고 전송구조가 비 대칭 구조인 경우 근사적 해석법인 결합 모드 이론의 편파조건이 부정확함을 알 수 있었다.

  • PDF

The Analysis of tight Coupling and Propagation for a Composite Fiber-Dielectric Slab with a Conductor Cladding

  • Kwon, Kwang-Hee;Song, Jae-Won;Kim, Jeong-Hoon;Park, Euy-Don;Son, Seok-Woo
    • Journal of the Optical Society of Korea
    • /
    • 제7권1호
    • /
    • pp.20-27
    • /
    • 2003
  • A theoretical presentation of evanescent coupling is offered with respect to the refractive indexes between a side-polished optical fiber and an infinitely planar waveguide with a conductor cladding (PWGCC). The PWG is suspended at a constant distance from an unclad fiber core and attached with the perfect conductor (PEC) on one side. The behavior of the distributed couple. is examined using a coupled mode model, which takes account of the two dimensions of the waveguide configuration. The coupling and propagation of light were found to depend on both the relationship between the refractive index values of each structure and the configuration of the side-polished fiber used in the PWGCC. The spreading of light in the unconfined direction of the PWGCC is described in terms of a simple geometrical interpretation of the synchronization condition that is in agreement with a previous investigation of the problem based on the coupled-mode theory (CMT). The power of the light propagation in the fiber decreased exponentially along the fiber axis as it was transferred to the PWGCC, where it was carried away.

The Effects of Various Apodization Functions on the Filtering Characteristics of the Grating-Assisted SOI Strip Waveguides

  • Karimi, Azadeh;Emami, Farzin;Nozhat, Najmeh
    • Journal of the Optical Society of Korea
    • /
    • 제18권2호
    • /
    • pp.101-109
    • /
    • 2014
  • In this paper, four apodization functions are proposed for silicon-on-insulator (SOI) strip waveguides with sidewall-corrugated gratings. The effects of apodization functions on the full width at half maximum (FWHM), the side-lobe level, and the reflectivity of the reflection spectrum are studied using the coupled-mode theory (CMT) and the transfer-matrix method (TMM). The results show that applying proposed apodization functions creates very good filtering characteristics. Among investigated apodized waveguides, the apodization functions of Polynomial and z-power have the best performance in reducing side-lobes, where the side-lobe oscillations are entirely removed. Four functions are also used for precise adjustment of the bandwidth. Simulation results show that the minimum and maximum values of the FWHM are 0.74 nm and 8.48 nm respectively. In some investigated functions, changing the apodization parameters decreases the reflectivity which is compensated by increasing the grating length.

Bus-waveguide-width Dependence of Evanescent Wave Coupling in a Microring Resonator

  • Son, Seong-Jin;Kim, Suyeon;Yu, Nan Ei;Ko, Do-Kyeong
    • Current Optics and Photonics
    • /
    • 제5권5호
    • /
    • pp.538-543
    • /
    • 2021
  • The evanescent wave coupling of a microring resonator is controlled by changing the gap distance between the bus waveguide and the microring waveguide. However, the interdependence of the bus waveguide's width and the coupling is not well understood. In this paper, we investigate the dependence of coupling strength on the bus waveguide's width. The strength of the evanescent wave coupling is analytically calculated using coupled-mode theory (CMT) and numerically calculated by three-dimensional finite-difference-time-domain (FDTD) simulation. The analytic and numerical simulation results show that the phase-matching condition in evanescent wave coupling does not provide maximum coupling strength, because both phase-matching and mode confinement influence the coupling. The analytic and simulation results for the evanescent coupling correspond to the experimental results. The optimized bus-waveguide width that provides maximum coupling strength results in intrinsic quality factors of up to 1.3 × 106. This study provides reliable guidance for the design of microring resonators, depending on various applications.

측면 연마된 광섬유와 완전도체면 아래의 유전체 사이에서의 결합과 전파특성의 해석 (Light Coupling and Propagation Between a Fiber and a Dielectric Slab with a Conductor Cladding)

  • 권광희;윤기홍;김정훈;송재원;박의돈;손석우
    • 한국통신학회논문지
    • /
    • 제28권2A호
    • /
    • pp.70-79
    • /
    • 2003
  • 완전도체면 아래의 유전체와 측면 연마된 광섬유의 소산장 결합 및 전파특성에 대한 해석 연구 결과를 나타내었다. 두 구조에서의 전파특성과 소산장 결합 관계를 해석하기 위해 결합모드 방정식과 혼합 모드(compound-mode) 방정식을 이용하여 코아와 유전체의 굴절률 및 구조의 각 변수에 대한 특성을 나타내었다. 그리고 측면 연마된 광섬유와 완전도체면 아래의 유전체가 결합할 때 일어나는 광섬유에서의 감쇠현상을 비교하기 위하여 감쇠상수를 구하여 함께 비교하였다.