• Title/Summary/Keyword: Coupled Cavity

검색결과 133건 처리시간 0.026초

무선통신 백-홀용 V-밴드 도파관 슬롯 서브-배열 안테나의 설계 (Design of V-Band Waveguide Slot Sub-Array Antenna for Wireless Communication Back-haul)

  • 노광현;강영진
    • 한국산학기술학회논문지
    • /
    • 제17권7호
    • /
    • pp.334-341
    • /
    • 2016
  • 본 논문은 고 용량, Gbps급 데이터 전송을 만족하는 무선 백-홀 시스템에 적용하기 위한 도파관 개구 결합 급전 구조 안테나에 관한 내용으로 V-대역인 57GHz~66GHz 주파수 대역에서 사용 할 공동-급전 구조를 갖는 $32{\times}32$ 도파관 슬롯 서브-배열 안테나를 설계, 제작 하였다. 안테나 구성은 적층 형태로 되어있으며, 각각 복사 부(외부 홈과 슬롯, 캐비티), 개구 결합 부, 급전 부로 이루어져 있다. 안테나 설계는 3차원 유한 요소 법(FEM)을 기반으로 하는 HFSS를 이용 하였고, 안테나 제작은 알루미늄 재질로 정밀도 높은 밀링 머신을 사용하여 각 층을 가공 한 후 은(Ag)-도금 과정을 거쳐 조립하였다. 측정을 통해서 안테나의 특성을 분석한 결과 목표했던 적용 주파수 대역에서의 반사 손실은 전반적으로 -12dB이하 손실 특성을 나타냈으며, VSWR < 2.0기준으로 약 16 %에 달하는 광 대역 주파수 특성을 보였다. 측정된 안테나 복사패턴의 1차 부엽 레벨은 -12.3 dB미만 이고, 3 dB 빔 폭은 약 $1.85^{\circ}$ 로 좁은 빔 폭을 갖는다. 또한, 안테나 이득은 평균 38.5 dBi이상, 효율은 약 90% 이상으로 높은 효율을 얻었다.

활로 4징증의 근치수술후의 원격 방실전도 차단 (Complete A-V Block 3 Months after Total Correction of Tetralogy of Fallot)

  • 송요준
    • Journal of Chest Surgery
    • /
    • 제11권3호
    • /
    • pp.326-332
    • /
    • 1978
  • There appears some conduction defects frequently after total correction of Tetralogy of Fallot. Common defect is right bundle branch block due to surgical intervention. We experienced complete A-V block which occured 3 months later after total correction of Tetralogy of Fallot in a 8 year old boy. The patient was completely free of any A-V block after the operation for 3 months, and sudden onset of A-V block with coupled premature ventricular contractions resulted him in shock state during the attack of severe bronchopneumonia for 4 days prior to the second visit. Emergency implantation of Cordis demand type temporary pacemaker was necessary to control the complete heart block with bradyarrhythmia and frequent ventricular fibrillation. Permanent cardiac pacemaker was implanted two weeks later as indicated with Cordis Stanicor lambda demand pacemaker, and the patient was discharged uneventfully on the 8th post implantation day with the heart rate of 72/min. Another 3 months after the implantation, the patient was transported to this hospital as dead on arrival after an accidental fall from a 2 meter height, and all possible cardiopulmonary resuscitation was performed for 60 minutes at the emergency room in vain. Autopsy was done to find out the cause of sudden death and the etiology of complete heart block. Microscopic focal infarctions with scar formation were noted along the course of conduction system in the interventricular septum, which might be the main cause of complete heart block during the attack of severe bronchopneumonia complicated with acute bacterial endocarditis. The tip of the pacemaker wire was slipped from the granulation scar at the apex of the right ventricular cavity, and this might be the direct cause of pacing failure and death.

  • PDF

습공기 유동에서 발생하는 충격파와 경계층 간섭의 피동제어에 관한 연구 (Study on the Passive Shock/Boundary Layer Interaction Control in Transonic Moist Air Flow)

  • 백승철;권순범;김희동
    • 한국항공우주학회지
    • /
    • 제30권8호
    • /
    • pp.21-29
    • /
    • 2002
  • 본 연구는 다공벽과 공동을 사용한 피동제어법을 천음속 습공기 유동에서 발생하는 충격파와 경계층 간섭에 적응하였다. 지배방정식은 액적성장 방정식과 완전히 결합된 2차원, 비정상, 압축성 Navier-Stokes 방정식이며, 3차 오더 MUSCL 타입의 TVD 기법을 사용하였다. 또 난류모델로는 Baldwin-Lomax 모델을 적용하였다. 본 연구에서 적용한 제어법의 유용성을 조사하기 위해 유동의 전압손실과 충격파 변위의 시간의존성 거동을 해석하였다. 수치계산 결과로부터 본 연구의 피동제어기법을 통해 천음속 습공기 유동에서 발생하는 충격파/경계층 간섭으로 인한 전압손실이 상당히 감소하였고, 익에서 충격파 운동을 억제하는 것으로 나타났다. 또 다공영역의 위치가 본 연구의 제어법의 효과에 상당한 영향을 준다는 것이 발견하였다.

열유도된 왜곡편광을 이용하는 결합공진기를 갖는 선형 편광된 Nd:YAG 레이저 (A linearly polarized Nd:YAG laser with a coupled cavity utilizing thermally induced depolarization)

  • 김현수;이성만;고도경;문희종;임권;차병헌;이종민
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2000년도 하계학술발표회
    • /
    • pp.104-105
    • /
    • 2000
  • 다이오드 레이저로 펌핑되는 Nd:YAG 매질에 형성된 열 복굴절은 레이저 출력과 빔질의 저하를 초래한다. 선편광된 레이저 출력을 얻기 위해서는 주로 공진기 내에 선형 편광자를 삽입하게 되는데, 레이저 매질에 형성된 열 복굴절에 의한 왜곡 편광된 레이저 빔이 편광자에 의해 반사되어 공진기 손실을 초래한다. 편광 왜곡에 의한 레이저 빔의 손실을 줄이거나 이중 초점을 제거하기 위해 주로 사용되어지는 광 소자는 Faraday 회전자, λ/4 판, 석영 회전자 등이 사용되어진다.$^{(1-5)}$ 90$^{\circ}$ 석영 회전자와 Faraday 회전자는 공진기 내에 두 개의 동일한 구조를 갖는 레이저를 이용할 경우 사용되고 λ/4 판 과 45$^{\circ}$ Faraday 회전자는 주로 단일 레이저 헤드의 복굴절 보상을 위해 사용되어진다. 45$^{\circ}$ Faraday 회전자는 이론적으로 완벽히 열복굴절에 의한 편광 왜곡을 보상한다. 그러나, 열복굴절을 완벽히 보상하기 위해서는 레이저 빔이 항상 레이저 매질의 같은 지점을 통과해야 한다. 실제적으로 레이저 매질에서는 열에 의한 열 렌즈 효과가 있기 때문에 레이저 빔이 항상 같은 지점을 통과하지 않게 된다. 이런 문제를 해결하기 위해 공진기 내에 열 렌즈 효과를 보상하기 위한 렌즈를 삽입하거나 레이저 헤드를 공진기 거울 가까이 설치하여야 한다. Faraday 회전자는 길이가 길기 때문에 레이저 헤드를 공진기 거울 가까이 설치하기는 어렵고 항상 열 렌즈 효과를 보상해주는 광학 소자가 있어야 하는 단점이 있다. 반면 λ/4 판은 완벽한 편광 왜곡을 보상해주지 않아 레이저 손실을 초래하지만 두께가 얇아 레이저 헤드와 공진기 거울을 근접해서 설치할 수 있어서 몇몇 연구자에 의해 연구되어 졌다.$^{(3)}$ 본 연구에서는 λ/4 판을 이용하고 편광기에서 반사된 빔을 공진기에 되반사 시키는 구조를 사용하여 선 편광된 레이저의 출력과 빔의 질을 개선 시켰다. (중략)

  • PDF

Optimization of the anti-snow performance of a high-speed train based on passive flow control

  • Gao, Guangjun;Tian, Zhen;Wang, Jiabin;Zhang, Yan;Su, Xinchao;Zhang, Jie
    • Wind and Structures
    • /
    • 제30권4호
    • /
    • pp.325-338
    • /
    • 2020
  • In this paper, the improvement of the anti-snow performance of a high-speed train (HST) is studied using the unsteady Reynolds-Averaged Navier-Stokes simulations (URANS) coupled with the Discrete Phase Model (DPM). The influences of the proposed flow control scheme on the velocity distribution of the airflow and snow particles, snow concentration level and accumulated mass in the bogie cavities are analyzed. The results show that the front anti-snow structures can effectively deflect downward the airflow and snow particles at the entrance of the cavities and alleviate the strong impact on the bogie bottom, thereby decrease the local accumulated snow. The rotational rear plates with the deflecting angle of 45° are found to present well deflecting effect on the particles' trajectories and force more snow to flow out of the cavities, and thus significantly reduce the accretion distribution on the bogie top. Furthermore, running speeds of HST are shown to have a great effect on the snow-resistance capability of the flow control scheme. The proposed flow control scheme achieves more snow reduction for HST at higher train's running speed in the cold regions.

정중과잉치로 인해 회전된 상악 중절치의 치험례 (THE TREATMENT OF SEVERELY ROTATED MAXILLARY INCISORS BY MESIODENS)

  • 이범의;김영재;김정욱;장기택;이상훈;김종철;한세현
    • 대한소아치과학회지
    • /
    • 제31권4호
    • /
    • pp.630-635
    • /
    • 2004
  • 정중과잉치의 원인은 잘 알려지지는 않았지만 dental lamina의 hyperactivity에 의해 발생한다는 가설이 가장 많이 받아들여지고 있다. 이러한 정중과잉치의 병발증으로는 주변 영구절치의 맹출 장애, 만곡 치근, 치근흡수, primordial 혹은 follicular cyst의 형성, 회전, 이환된 부위의 총생 및 비정상적인 정중이개를 일으킬 수 있다. 이러한 이유로 영구전치의 회전이 야기되면 보통 공간의 부족은 적거나 없으며 재발이 흔하므로 과개선이 요구된다. 재발의 방지를 위해서는 조기치료, 과개선, 긴 보정기간, 적절한 접촉면의 형성, 짝힘의 사용, 그리고 수술적인 방법 등이 제안되어왔다. 이에 저자는 정중과잉치로 인하여 심하게 회전된 상악중절치를 주소로 내원한 환아에서 교정적, 외과적 술식을 이용하여 양호한 결과를 얻은 두 증례를 보고하는 바이다.

  • PDF

구조-음향 연성계의 경계값 변화에 따른 방사음 변화 (A Parameter Study on the Frequency Characteristics of the Structural-acoustic Coupled System)

  • 김양한;서희선
    • 한국소음진동공학회논문집
    • /
    • 제14권7호
    • /
    • pp.604-611
    • /
    • 2004
  • It is well known that wall impedance essentially determines how sound wave transmits from one place to another. The wall impedance is related with its dynamic properties : for example, the mass, stiffness, and damping characteristics. It is noteworthy, however, that the wall impedance is also function of spatial characteristics of two spaces that is separated by the wall. This is often referred that the wall is not locally reacting. In this paper, we have attempted to see how the acoustic characteristics of the two spaces is affected by various structure parameters such as density, applied tension, and a normalized length of the wall. Calculations are conducted for two different modally reacting boundary conditions by modal expansion method. The variation of the Helmholtz mode and the structural-dominated mode are analyzed as the structure parameters vary. The displacement distribution of the structure, pressure and active intensity of the inside and outside cavity are presented at the Helmholtz mode and the structure-dominated mode. It is shown that the frequency characteristics are governed by both structure-and fluid-dominated mode. The results exhibit that the density of the structure is the most sensitive design parameter on the frequency characteristics for the coupling system as we could imagine in the beginning. The Helmholtz mode frequency decrease as density increases. However. it increases as applied tension and an opening size increase. The bandwidth of the Helmholtz mode is mainly affected by density of the structure and its opening size.

Flow-induced pressure fluctuations of a moderate Reynolds number jet interacting with a tangential flat plate

  • Marco, Alessandro Di;Mancinelli, Matteo;Camussi, Roberto
    • Advances in aircraft and spacecraft science
    • /
    • 제3권3호
    • /
    • pp.243-257
    • /
    • 2016
  • The increase of air traffic volume has brought an increasing amount of issues related to carbon and NOx emissions and noise pollution. Aircraft manufacturers are concentrating their efforts to develop technologies to increase aircraft efficiency and consequently to reduce pollutant discharge and noise emission. Ultra High By-Pass Ratio engine concepts provide reduction of fuel consumption and noise emission thanks to a decrease of the jet velocity exhausting from the engine nozzles. In order to keep same thrust, mass flow and therefore section of fan/nacelle diameter should be increased to compensate velocity reduction. Such feature will lead to close-coupled architectures for engine installation under the wing. A strong jet-wing interaction resulting in a change of turbulent mixing in the aeroacoustic field as well as noise enhancement due to reflection phenomena are therefore expected. On the other hand, pressure fluctuations on the wing as well as on the fuselage represent the forcing loads, which stress panels causing vibrations. Some of these vibrations are re-emitted in the aeroacoustic field as vibration noise, some of them are transmitted in the cockpit as interior noise. In the present work, the interaction between a jet and wing or fuselage is reproduced by a flat surface tangential to an incompressible jet at different radial distances from the nozzle axis. The change in the aerodynamic field due to the presence of the rigid plate was studied by hot wire anemometric measurements, which provided a characterization of mean and fluctuating velocity fields in the jet plume. Pressure fluctuations acting on the flat plate were studied by cavity-mounted microphones which provided point-wise measurements in stream-wise and spanwise directions. Statistical description of velocity and wall pressure fields are determined in terms of Fourier-domain quantities. Scaling laws for pressure auto-spectra and coherence functions are also presented.

연약지반 구간에서 지표투과레이더 활용한 교량 접속부 침하량 안전 평가 (Safety Evaluation of the Settlement Amount of the Bridge Earthwork Transition Area Using the Ground Penetrating Radar in the Soft Ground Section)

  • 정국영;조영균;김성래
    • 한국지반환경공학회 논문집
    • /
    • 제23권8호
    • /
    • pp.17-22
    • /
    • 2022
  • 공용 중에 연약지반의 침하로 발생된 교량 접속부의 단차 개선을 위해 도로관리기관에서는 지속적으로 덧씌우기를 실시하고 있다. 본 연구에서는 연약지반 내에 건설된 교량 9개소에 대해 접속부의 침하량을 추정하고자 1GHz 안테나를 차량에 탑재한 지표투과레이더 장비를 이용하였다. 포장 내부 조사가 가능한 지표투과레이더 기술로 아스팔트 도로에서 깊이 1m 수준까지 효과적으로 포장두께의 측정이 가능하였다. 노면 변형 조사결과와는 다르게, 9개 교량 접속부에서 측정된 포장두께 변화량은 최소 50mm에서 최대 600mm로 상당하였으며, 공동(空洞)의 발생 가능성도 높았다. 또한 각 교량 접속부의 부위별로는 증가된 포장두께의 차이가 50~250mm로 나타나 부등침하 위험이 존재하였다. 본 연구에서 지표투과레이더 결과에 근거하여 주행성 개선 및 침하부 유지관리 방안을 제시하였다.

아말감과 이종(異種)금속의 거리에 따른 부식에 대한 고찰 (A Study on Corrosion according to Distance between Amalgam and Dissimilar Metals)

  • 김주원;정은경
    • 치위생과학회지
    • /
    • 제4권3호
    • /
    • pp.103-109
    • /
    • 2004
  • 본 실험은 제조회사 매뉴얼과 통법에 의해서 Amalgam 합금, Ni-Cr alloy의 Crown용 Verabond, Denture용 Talladium $^{TM}alloy$로 각각 24개의 총 72의 시편을 하악 제1대구치근 원심 치관 폭경과 임상에서의 MOD cavity를 고려하여 제작하였고 인공 타액 80ml를 담은 200ml 용 비이커에 시편을 넣어 0mm, 7mm, 40mm 거리에서 7일 후 갈바닉 부식을 측정하였다. 유리금속은 유도 플라즈마 방출 분광기(Inductively Coupled Plasma - Atomic Emission Spectrometer(ICP-AES, JY-50P, VG Elemental Co. France)로 전해액내의 Cu, Ag, Ni, Cr, Sn, Zn, Hg를 정량 분석했으며 그 결과 다음과 같은 결론을 얻었다. 첫째, Cu, Sn, Ag, Hg, Zn은 아말감이 금 합금과 접촉했을 때가 크라운용 Ni-Cr alloy와 덴쳐용 Talladium alloy 보다 아주 많이 유리 했으며 금 합금이 구강조직과 생체 적합성이 가장 좋다지만 아말감과 함께 있을 때 가장 불리 했슴을 알 수 있었다. 둘째, 아말감이 금 합금과 접촉했을 때, 금 합금의 조성에서 Ni, Cr 같은 중금속이 함유되지 않았기 때문인지 전혀 유리되지 않았으나 Sn은 조성에는 없었지만 $227.1{\pm}18.0035{\mu}g/cm^2$나 유리 되었고 Hg도 유리되었는데 이는 아말감 자체의 유리 물질임을 추측할 수 있었다. 셋째, 아말감 합금과 금 합금 사이에서의 0mm, 7mm, 40mm 거리에서는 Cu, Ag는 유의성이 있었으며 Hg는 유의성이 없었다. 이는 금합금은 절대 아말감과 같이 사용해서 안되며 이종 보철물 사이의 거리에 관계없이 사용을 금해야 하는 것으로 사료된다. 넷째, 아말감합금이 Crown용 Ni-Cr 합금과 접촉했을 때 아말감의 Ag이 유리 되지 않았으며 Zn, Ni, Sn, Hg, Cu의 순으로 유리되었다. 0mm, 7mm, 40mm 거리에 따라서 유의성이 있었다. Hg는 유리 되지 않았지만 중금속인 Ni, Cr은 유리되었고 반대 악궁이나 거리가 떨어져 있으면 접촉보다 Hg의 유리가 적었다. 다섯째, 아말감합금이 Denture용 Talladium alloy 합금과 접촉했을 때 0mm, 7mm, 40mm 거리에서도 유의성이 있었다. 0mm, 7mm, 40mm 거리에 따라서 유의성이 있었다. Hg는 유리 되지 않았지만 중금속인 Ni, Cr은 유리되었고 반대 악궁이나 거리가 떨어져 있으면 접촉보다 Hg의 유리가 적었다. 여섯째, 인공 타액에서 접촉 시 Amalgam alloy와 Gold, Verabond, Talladium alloy의 Cu, Sn, Ag, Hg, Zn, Ni, Cr의 ICPES 검사 결과 Cu, Hg가 유의성을 있었다. 일곱째, 인공타액에서 아말감합금과 두 비귀금속인 Ni-Cr alloy(crown용), Denture용 Talladium alloy가 접촉한 경우 거리에 따른 Hg, Ni, Cr의 유리 부산물에서 유의성을 확인했다.

  • PDF