• Journal of the Korean Society of School Health
• /
• v.32 no.1
• /
• pp.10-19
• /
• 2019

Purpose: The purpose of this study was to compare the factors related to depression between non-multicultural and multicultural middle school students. Methods: In this study, data were collected using structured questionnaires targeting students of 9 middle schools in G Province, Korea. Finally, the data of 304 students were analyzed by descriptive statistics, t-test, ANOVA, Pearson's correlation, and multiple regression analyses using SPSS 24.0. Results: The multicultural students showed a higher depression score ($47.14{\pm}8.33$) than the counterpart ($44.22{\pm}8.11$) (p<.001). The results of the multiple regression analysis revealed that academic stress (${\beta}=.33$, p<.001), peer attachment (${\beta}=-.13$, p<.02), and body image (${\beta}=.25$, p<.001) were the influencing factors on depression in non-multicultural students. However, in multicultural students, depression was related to peer attachment (${\beta}=-.16$, p=.03) and self-esteem (${\beta}=-.42$, p<.001). Conclusion: To prevent and manage depression in non-multicultural middle school students, it is essential to help them relieve academic stress and build peer relationships and positive body image. For multicultural middle school students, helping them to have high self-esteem and peer attachment would be the first measure to prevent and manage depression.

• Nuclear Engineering and Technology
• /
• v.51 no.4
• /
• pp.1008-1016
• /
• 2019

In the SG (steam generator) of PWR (pressurized water reactor) for a nuclear plant, hundreds of U-shaped tubes are used for the heat exchanger system. They interact with primary pressurized cooling water flow, generating flow-induced vibration in the secondary flow region. A simplified U-tube model is proposed in this study to apply for experiment and its counterpart computation. Using the commercial code, ANSYS-CFX, we first verified the Moody chart, comparing the straight pipe theory with the results derived from CFD (computational fluid dynamics) analysis. Considering the virtual mass of fluid, we computed the major modes with the low natural frequencies through the comparison with impact hammer test, and then investigated the effect of pump flow in the frequency domain using FFT (fast Fourier transform) analysis of the experimental data. Using two-way fluid-structure interaction module in the CFD code, we studied the influence on mean flow rate to generate the displacement data. A feasible CFD method has been setup in this research that could be applied potentially in the field of nuclear thermal-hydraulics.

• Journal of the Korean Chemical Society
• /
• v.57 no.3
• /
• pp.389-397
• /
• 2013

In this study, the effects of STAD cooperative learning strategy on students' achievement, learning motivation, perceptions of learning environment, and perceived classroom goal structure were investigated in terms of students' collectivism level. Two classes (64 students) from an elementary school were respectively assigned to a control group and a treatment group. A individualism-collectivism test, a learning motivation test, a perceptions of learning environment test, and a perceived classroom goal structure test were administered as pretests. The intervention of cooperative learning lasted for 24 class periods. After instruction, an achievement test, the learning motivation test, the perceptions of learning environment test, and the perceived classroom goal structure test were administered. The results indicated that the students of the treatment group significantly outperformed those of the control group in the achievement test. There was a significant treatment-aptitude interaction effect in the scores of the attention subcategory of the learning motivation. In the perceptions of learning environment, the score of the treatment group was significantly higher than the control group in the cohesiveness subcategory, whereas the score of the treatment group was significantly lower than their counterpart in the competitiveness subcategory. It was also found that the score of the treatment group was significantly higher than the control group in the performance subcategory of the perceived classroom goal structure.

• Earthquakes and Structures
• /
• v.7 no.2
• /
• pp.179-199
• /
• 2014

The steel tube-reinforced concrete (ST-RC) composite column is a novel type of composite column, consisting of a steel tube embedded in reinforced concrete. The objective of this paper is to investigate the effect of cumulative damage on the seismic behavior of ST-RC columns through experimental testing. Six large-scale ST-RC column specimens were subjected to high axial forces and cyclic lateral loading. The specimens included two groups, where Group I had a higher amount of transverse reinforcement than Group II. The test results indicate that all specimens failed in a flexural mode, characterized by buckling and yielding of longitudinal rebars, failure of transverse rebars, compressive crushing of concrete, and steel tube buckling at the base of the columns. The number of loading cycles was found to have minimal effect on the strength capacity of the specimens. The number of loading cycles had limited effect on the deformation capacity for the Group I specimens, while an obvious effect on the deformation capacity for the Group II specimens was observed. The Group I specimen showed significantly larger deformation and energy dissipation capacities than the corresponding Group II specimen, for the case where the lateral cyclic loads were repeated ten cycles at each drift level. The ultimate displacement of the Group I specimen was 25% larger than that of the Group II counterpart, and the cumulative energy dissipated by the former was 2.8 times that of the latter. Based on the test results, recommendations are made for the amount of transverse reinforcement required in seismic design of ST-RC columns for ensuring adequate deformation capacity.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.2
• /
• pp.121-128
• /
• 2014

BACKGROUND: The disease resistant (OsCK1) rice was generated by inserting choline kinase (CK1) and phosphinothricin acetyltransferase (PAT) genes isolated from Oryza sativa and Streptomyces hygroscopicus into the genome of the rice, Nakdongbyeo. With the potential problems of safeties, the evaluations on non-target organisms are essentially required for the environmental risk assessment of genetically modified (GM) crops. In the present study, we conducted the evaluation of acute toxicity on Daphnia magna that commonly used as a model organism in ecotoxicological studies for non-target organism evaluation. METHODS AND RESULTS: Effect of acute toxicity to Daphnia magna by each concentration were investigated in the disease resistant (OsCK1) rice and non-genetically modified (non-GM) rice, Nakdongbyeo, as concentration (0, 1,000, 1,800, 3,240, 5,830, 10,500 and 20,000 mg/L). The OsCK1 rice used for the test was confirmed to express the OsCK1/PAT gene by the PCR(Polymerase chain reaction) and western blot analysis. Feeding test showed that no significant differences in cumulative immobility and abnormal response of Daphnia magna fed on OsCK1 rice or non-GM rice. The 48hr-$EC_{50}$ values showed no difference between OsCK1 rice (3,147.18 mg/L) and non-GM rice (3,596.27 mg/L). CONCLUSION: This result suggested that there was no significant difference in toxicity to Daphnia magna between OsCK1 rice and non-GM counterpart.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.4 s.77
• /
• pp.481-490
• /
• 2005

This paper summarizes the full-scale test results on the CFT column-to-flat plate connections subjected to gravity loading. CFT construction has gained wide acceptance in a relatively short time in domestic building construction practice due to its various structural and construction advantages. Constructing an underground parking floor as a flat plate system is often regarded as essential for both cost savings and rapid construction. Efficient details for CFT-column-to-flat-plate connections have not been proposed yet, however, and their development is urgently needed. Based on some strategies that maximize economical field construction, several connecting schemes were proposed and tested based on a full-scale model. The test results showed that the proposed connection details can exhibit punching shear strength and connection stiffness comparable to or greater than those of their R/C flat plate counterpart.

• Earthquakes and Structures
• /
• v.17 no.3
• /
• pp.245-256
• /
• 2019

An experimental study was conducted to evaluate the dynamic behavior of a free-standing frame equipped with a movable base system using cast iron and mortar as the bearing materials. The preliminary friction test indicated that a graphite layer developed on the interface and exhibited stable friction behavior. The friction coefficient ranged from 0.33 to 0.36 when the applied normal compression stress ranged from 2.6 to 5.2 MPa. The effect of the variation of normal compression stress would be small. Shaking table tests on the free-standing frame showed that rock, slide, and rock-slide responses occurred. The cumulative slide distance reached 381 mm under JMA Kobe wave excitation; however, only a few cyclic slides occurred at the same locations along the moving track. Most surfaces sustained single slides. Similar results can be observed in other shaking conditions. The insufficient cyclic sliding and significant rocking resulted in a few graphite layers on the mortar surfaces. Friction coefficients were generally similar to those obtained in the preliminary friction tests; however, the values fluctuated when the rocking became significant. The collisions due to rocking caused strong horizontal acceleration responses and resulted in high friction coefficient. In addition, the strong horizontal acceleration responses caused by the collisions made the freestanding specimen unable to reduce the input horizontal acceleration notably, even when slippage occurred. Compared with the counterpart fixed-base specimen, the specimen equipped with the iron-mortar base could reduce the horizontal acceleration amplification response and the structural deformation, whereas the vertical acceleration response was doubled due to collisions from rocking.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.1
• /
• pp.108-113
• /
• 2022

Speech recognition in noise situation is an important skill for effective communication. Hearing In Noise Test (HINT) has been suggested as a clinical tool to evaluate these aspects. However, this tool has not been used widely in domestic clinics. In this study, psychophysical aspects of HINT and burdens in clinical application were analyzed to improve the applicability of the tool. The difficulty in understanding speech in the elderly population is due to hearing loss based on aging of peripheral and central auditory pathways. As typical clinical cases, HINT scores for young and elderly listeners (20s vs 70s) were compared. Four conditions of HINT test were Quiet (Q), Noise Front (NF), Noise Right (NR), and Noise Left (NL). Quantitative scores showed that the elderly listener required more Signal to Noris Ratio (SNR) values than the younger counterpart in noisy situations. Although both showed Binaural Masking Level Difference (BMLD) effect, the strength was smaller in the elder. However, the age-matched normalized data were not established in detail for clinical application. Confirmed usefulness of HINT and the related improvement in clinical measuring procedure were suggested.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.3-14
• /
• 2021

In the Chinese construction industry, the utilization of Building Information Modeling (BIM) aims to increase the total output of the construction industry by solving the problem of inefficient interoperability in the construction industry. In 2011, the Chinese Ministry of Housing and Urban-Rural Development despite the technical advantages of BIM and the government policy, the BIM adoption rate in China is lower than 45%. Meanwhile, as the South Korean construction industry is a step ahead of its Chinese counterpart in introducing and utilizing BIM, it is expected that BIM is more actively utilized and accepted in South Korea than in China. According to a comparative study based on the hype-cycle theory, South Korea is at a more advanced stage of introducing BIM, than in China. This study aimed to suggest how to increase BIM utilization rates in China. To this end, this study comparatively analyzed factors affecting BIM acceptance between China and South Korea. For the comparative analysis of the BIM acceptance factors between China and South Korea, literature reviews on the technology acceptance model (TAM) and BIM acceptance model were carried out, and based on that, the BIM acceptance factors were classified. Other BIM acceptance factors were also added and considered, as they reflected Chinese national characteristics and construction industry. As for the derived BIM acceptance factors, construction project participants, especially actual BIM users in China and South Korea, were targeted for the survey. A t-test using SPSS 22.00 was carried out to identify significant differences in data. Finally, based on the t-test results, this study suggested ways of improving the BIM utilization rate in China. Based on the findings, this study is expected to contribute to activating BIM adoption in the Chinese construction industry and also to set a theoretical foundation for future studies on BIM utilization in the industry.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.105-111
• /
• 2020

The present study examined the effect of the silica-based accelerating agents on the setting time and compressive strength gain of biomimetic glycocalix coating materials that has been developed for protecting the substrate of concrete exposed to chemical and microbiological attacks. The accelerating agent contents varied from 10mL/L to 40mL/L in the mixtures of glycocalix coating materials determined for shotcrete and lining techniques. Test results showed that the setting time of coating materials containing accelerating agents was affected by the contents of the bacteria carrier. When the accelerating agent content was 40mL/L, the final setting time was 80 minutes for shotcrete mixtures and 318 minutes for lining mixtures. Meanwhile, the compressive strength gain of coating materials with accelerating agents tended to be lower than that of counterpart materials without accelerating agents.