• 한국안전학회지
• /
• 제17권3호
• /
• pp.107-111
• /
• 2002

닥트의 두께와 속도 경계조건이 정상중력 및 무중력 상태에서 화염구조에 미치는 영향을 조사하기 위해 81%의 질소와 19%의 메탄이 혼합된 가연성가스와 공기의 저변형율 (20 s-1) 대향류 화염을 수치법으로 모사하였다. 정상중력에서는 닥트의 두께와 속도 경계조건에 따라 화염의 위치가 이동함으로써 그 영향이 컸으나, 무중력에서는 그 영향을 무시할 수 있을 정도로 작은 것으로 나타났다. 화염구조의 차이는 부력으로 인한 것이고, 따라서 정상중력에서의 측정에서는 닥트 두께와 속도 경계조건의 영향을 고려해야 함을 알 수 있었다.

• 한국안전학회지
• /
• 제17권2호
• /
• pp.112-117
• /
• 2002

메탄-공기의 비예혼합 대향류 확산화염 차폐가스가 화염구조에 미치는 영향을 수치적으로 조사하였다. 20 $s^{-1}$의 저변형율, 메탄가스 19%와 질소 79%의 혼합가스 연료와 공기의 확산화염을 대상으로 하였다. 질소차폐가스의 속도의 차폐가스의 유무에 따른 화염의 형태와 중심선상의 온도 및 축방향 속도의 분포를 비교하였다. 정상중력에서 $V_{S}/V_{F}{\leq}2$일 때 차폐가스의 유동이 화염구조에 미치는 영향은 무시할 수 있었다. 정상중력에서 차폐가스가 없는 경우의 화염형태와 그 위치는 차폐가스가 있는 경우와 다르지만, 무중력에서는 중심선상에서 차폐가스의 영향이 거의 없었다.

• 한국연소학회지
• /
• 제8권4호
• /
• pp.9-14
• /
• 2003

High temperature air combustion technology has been utilized by using preheated air over 1100 K and excessive exhaust gas recirculation. Numerical analysis was performed to investigate the combustion characteristics with high temperature deficient oxygen air combustion by adopting a counterflow as a model problem accounting for detailed chemical kinetics. Methane($CH_4$) was used as a test fuel and calculated oxidizer conditions were low temperature high oxygen (300K, $X_{O2}=0.21$) and high temperature low oxygen (1300K, $X_{O2}=0.04$) conditions. The latter case showed that the flame temperature is lower than the former case and its profile showed monotonic decrease from oxidizer to fuel side, without having local maximum flame temperature at high stretch rate. Also, heat release rate was one order lower and it has one peak profile because of low oxygen concentration and heat release rate integral is almost same for stretch rate. High temperature low oxygen air combustion shows low NO emission characteristics.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권1호
• /
• pp.108-116
• /
• 1998

In this paper it is investigated the roles of key elementary reactions for NO formation in methane-air one-dimensional premixed flame and counterflow diffusion flame, which were studied numerically by using NO kinetics and $C_{2}$ -chemistry complied by Miller and Bowman. The spatial distributions of the reaction rates of 9 main elementary reactions directly related to NO formation and destruction were calculated. Integration of the rates of all reactions in the NO formation across the flame yields the quantitative reaction path diagram, which shows clearly relative importance of each reaction path in NO formation and how it changes with the type and parameters of the flame. The results show that the thermal and Fenimore mechanisms are dominant respectively for learn and rich premixed flames, and the latter is dominant for diffusion flames. In addition, it was found that the HCN recycle route is important for diffusion flame, and that the routes of mutual transformation between NO and NO$^{2}$, and between NO and HNO do not contribute to the net NO formation.

• 대한기계학회논문집B
• /
• 제33권7호
• /
• pp.535-540
• /
• 2009

Experiments are conducted to elucidate effects of counterflow burner diameter on flame extinction behaviors in C-curve. Present experimental results with burner diameters of 18, 26, and 50 mm in normal-gravity are compared with the numerical result of Oppdif code as well as the previous experimental results in micro-gravity. The turning point migrates to a higher global strain rate as burner diameter decreases. It is shown that the C-curve with the burner diameter of 50mm is best-fitted to the numerical result of Oppdif code and the previous micro-gravity results also excurse to the numerical result. This suggests that the precise C-curve can be obtained only with an appreciably large burner. The main reason why these differences appear is shown to be attributed to the transition of shrinking flame disk to flame hole due to strong effects of radial conduction heat loss, which is the typical extinction characteristics of low strain rate flames with a finite burner diameter in a counterflow diffusion flame.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권8호
• /
• pp.853-862
• /
• 2006

The present study is numerically investigated the flame structure of non-premixed counterflow jet flames using the laminar flamelet model Detailed flame structures with the fuel composition of 40% CO, 30% $H_2$. 30% $N_2$ and an oxidizer composition of 79% $N_2$ and 21% $O_2$ in a non-premixed counterflow flame are studied numerically. This study is aimed to investigate the effects of axial velocity gradient and combustion atmosphere pressure on flame structure. The results show that the role of axial velocity gradient on combustion processes is globally opposite to that of combustion atmosphere pressure. That is, chemical nonequilibrium effects become dominant with increasing axial velocity gradient, but are suppressed with increasing ambient pressure. Also, the flame strength is globally weakened by the increase of axial velocity gradient but is augmented by the increase of ambient pressure. However, flame extinction is described better on the basis of only chemical reaction and in this study axial velocity gradient and ambient pressure play a similar role conceptually such that the increase of axial velocity gradient and ambient pressure cause flame not to be extinguished and extend the extinction limit, respectively. Consequently it is suggested that a combustion process like flame extinction is mainly influenced by the competition between the radical formation reaction and the third-body recombination reaction.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.949-955
• /
• 2000

Numerical study with detailed chemistry has been conducted to investigate the NOx formation and structure in $CH_4/Air-CO_2$ counterflow diffusion flames. The importance of radiation effect is identified and the role of $CO_2$ addition is addressed to thermal and chemical reaction effects, which can be precisely specified through the introduction of an imaginary species. Also NO separation technique is utilized to distinguish the contribution of thermal and prompt NO formation mechanisms. The results are as follows : The radiation effect is dominant at low strain rates and it is intensified by $CO_2$ addition. Thermal effect mainly contributes to the changes in flame structure and the amount of NO formation but the chemical reaction effect also cannot be neglected. It is noted that flame structure is changed considerably due to the addition of $CO_2$ in such a manner that the path of methane oxidation prefers to take $CH_4 {\rightarrow}CH_3{\rightarrow}C_2H_6{\rightarrow}C_2H_5$ instead of $CH_4 {\rightarrow}CH_3{\rightarrow}CH_2{\rightarrow}CH$. At low strain rate(a=10) the reduction of thermal NO is dominant with respect to reduction rate, but that of prompt NO is dominant with respect to total amount.

• 한국화재소방학회논문지
• /
• 제17권3호
• /
• pp.20-25
• /
• 2003

화염변형률과 소화약제의 첨가 및 부력이 비예혼합 대향류 화염의 구조와 소화에 미치는 영향을 조사하기 위해 필라멘트와 열전대를 이용한 실험과 Oppdif 및 FDS를 사용한 수치해석을 수행하였다. 소화농도에 가까운 메탄-공기의 확산화염에 대하여 2.2초의 무중력 낙하실험과 정상중력에서의 측정결과를 수치모사의 결과와 비교하였다. 변형률 7 s$^{-1}$에서 100 s$^{-1}$까지 무중력상태에서 측정한 임계소화농도로부터 질소의 임계소화농도에 최대치가 있음을 확인하였다. 또한, 부력의 효과, 즉, 화염의 곡률과 두께 변화를 FDS의 계산결과로 확인하였다. 무중력상태에서 화염의 최고온도와 그 위치에 대한 실험치와 계산값이 일치함을 알 수 있었다.

• 한국추진공학회지
• /
• 제20권6호
• /
• pp.101-112
• /
• 2016

초음속 비행체의 항력 감소 기초 실험을 위한 플라즈마 분사장치의 특성에 대해 분석하였다. 플라즈마 종류는 고압에서 발생이 가능한 열 플라즈마가 적합하다. 열 플라즈마를 발생하기 위해 플라즈마 토치를 사용한다. 플라즈마 토치는 고압 고속 분사가 가능하기 때문에 플라즈마 분사 제트에 적합한 플라즈마 발생장치이다. 본 연구에서는 확보한 플라즈마 토치에 대해 분석 및 정리하였고 기초 연구를 수행하였다. 그 결과 플라즈마 제트 발생의 주요 변수로는 플라즈마 토치의 전극 간격과 공급 기체의 압력으로 고려되었다.

• 설비공학논문집
• /
• 제10권5호
• /
• pp.535-549
• /
• 1998

A numerical study for performance analysis of a counterflow type forced draft tower and natural draft cooling tower has been performed based on the method using the finite volume method with non-orthogonal body fitted and non-staggered grid system. For solving the coupling problem between water and air, air enthalpy balance, moisture fraction balance, water enthalpy balance, and water mass balance equations are solved with Navier-Stoke’s equations simultaneously. For the effect of turbulence, the standard k-$\varepsilon$ turbulent model is implied in this analysis. The predicted result of the present analysis is compared with the experimental data and the commercial software result to validate the present study, The predicted results show good agreement with the experimental data and the commercial software result. To investigate the influence of the cooling tower design parameters such as approach, range and wet bulb temperature, parametric studies are also peformed.