• 한국지반신소재학회논문집
• /
• 제14권1호
• /
• pp.51-58
• /
• 2015

압성토공법은 성토체의 안정성을 높이기 위하여 성토체 측면에 일정한 폭과 높이로 흙을 쌓은 공법을 말한다. 본 연구는 실제 도로현장에서 전단파괴가 발생되어 복구방법으로 압성토공법을 적용한 시공사례를 분석한 것이다. 본 연구는 수치해석을 실시하여 효율적인 압성토 단면을 제시하고자 한다. 수치해석결과 효율적인 압성토 단면은 압성토 폭 : 제체 높이의 2배(2H), 압성토 높이 : 제체높이의 1/3(H/3) 이다. 또한, 압성토체를 가로지르는 측구를 설치할 경우, 본성토체로부터 적절한 이격거리를 제시함으로서 효과적인 횡단측구의 범위를 제시하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.656-661
• /
• 2003

Modem reciprocating air compressors have tendency to a multi-stage W-type or V-type cylinder arrangement for the purpose of high outlet pressure, compactness and low vibration and noise. A valid counter weight calculation method using the complex expression is proposed for reducing the inertia forces of the compressor. Counter weight removes only 1st forward whirl component. Counter weight formulations are applied to the six various compressor structures which are (a) 1 cylinder single-throw crank shaft, (b) 2 cylinder single-throw crank shaft (c) 2 cylinder double-throw clank shaft, (d) 3 cylinder single-throw crank shaft, (e) 4 cylinder single-throw crank shaft and (f) 4 cylinder double-throw crank shaft. The improvement of performance is verified through available vibration test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.227-233
• /
• 2002

For the purpose of high outlet pressure, compactness and low vibration and noise, modem reciprocating air compressors are tend to have a multi-stage W-type or V-type cylinder arrangement. An effective counter weight calculation method is presented for reducing the inertia forces of the compressor. This calculation method is using the complex representation and verified its validity. A design program for the counter weight of W-type or V-type air compressor was presented to the manufacturer, A designed counter weight was attached to the W-type or V-type air compressor. Vibration test results gave us improved performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.982-986
• /
• 2000

Perpendicular guideway mechanism has a different behavior with horizontal guideway mechanism due to the slider weight. So, to decrease its weight effect, counter balances such as weight type and hydraulic cylinder type are used. But it can also make another motion behavior by weight rate of slider and counter balance, its connected position. Therefore, it is necessary to find design parameters and analyze their effect. This paper dealt with the optimal design of perpendicular guideway mechanism. For analysis, the theoretic model as same as real machine tool and sib plate to adjust the clearance was used. Rotational angle and displacement of slider, pressure distribution, friction distribution were calculated. Stick slip, intermittent motion of slider according to friction change was adapted to the perpendicular guideway mechanism.

• 한국식품영양과학회지
• /
• 제22권2호
• /
• pp.149-153
• /
• 1993

본 연구는 자연스런 환경에 있는 다수인의 소비에너지를 측정하고자 할 때 보다 간편하면서도 정확하게 소비에너지를 측정 할 수 있는 방법을 모색하고, 또 우리나라 여대생의 일일 소비에너지와 비만도에 다른 소비에너지 및 활동강도의 차이를 알아보고자 실시하였다. 여대생 82명을 대상으로 15-min check list와 calorie counter에 의한 두가지 방법으로 3일간의 소비에너지를 측정하여 두 방법에 의해 측정된 소비에너지의 관계를 검토하였는데 그 결과는 다음과 같다. 1) 일일의 소비에너지는 15-min check list에 의한 경우가 1963 kcal였고, calorie counter에 의한 경우가 1649kcal로 국내에서 보고된 타 연구결과와 비교해 볼 때 15-min check list에 의한 측정치는 비슷하였으나, calorie counter로 측정할 때에는 실제보다 낮게 측정되는 것으로 볼 수 있었다. 그러나 두 방법이 모두 신체 계측치와 상관성이 높았고, 또 두 방법사이에 상관도도 매우 높았으므로 calorie counter로 측정한 값을 'DEE by 15-min check list=3.31186+1.18837$\times$DEE by calorie counter' 의 식에 의해 15-min check list값으로 환산해 주면 다수인을 대상으로 측정할 때 보다 간편하면서도 정확하게 소비에너지를 측정해 줄 수 있을 것으로 생각된다. 2)상대적 비만도에 따라 세군으로 나누었을 때 소비에너지와 활동강도가 세군에서 유의하게 달랐다. 또 자신의 활동을 15분 단위로 기록하게 한 뒤 활동등급별로 집계한 결과 활동등급 1의 빈도수가 저체중군이나 정상체중군에 비해 과체중군에서 유의하게 높았고 반면 활동등급 3의 경우에는 과체중군이 저체중군에 비 해 유의하게 빈도수가 낮아서 과체중군이 덜 활동적이라고 볼 수 있었다.

• 한국운동역학회지
• /
• 제27권2호
• /
• pp.91-97
• /
• 2017

Objective: To investigate rotation movement of segment for performing each position and its effect on knee/hip angulation, COM inclination, and edging angle changes. Method: Twelve Alpine skiers (age: $25.8{\pm}4.8years$, height: $173.8{\pm}5.9cm$, weight: $71.4{\pm}7.4kg$, length of career: $9.9{\pm}4.6years$) participated in this study. Each skier was asked to perform counter-rotation, neutral, and rotation positions. Results: Shank and thigh were less rotated in the counter-rotation position than in other positions, whereas the trunk and pelvis were more counter-rotated (p<.05). Hip angulation, COM inclination, and edging angle were significantly greater in the counter-rotation position than in other positions (p<.05). Conclusion: Our finding proved that the counter-rotation position increases hip angulation, COM inclination, and edging angle. Consequently, we suggest that skiers should perform counter-rotation of the trunk and pelvis relative to the ski direction in the vertical axis for the counter-rotation position. Further analysis will continue to investigate the effects of the counter-rotation position in real ski slope with kinetic analysis.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.39-42
• /
• 2008

In the case of the general helicopter among rotorcraft, length of the rotor blade for thrust-generation is longer than that of fuselage and tail rotor is required in order to compensate moment of the fuselage. For those reasons, enough space for take-off and landing should be secured and an accessibility for building is low. Also, the accidents caused by tail rotor occur frequently. However, the case of counter-rotating has merits that tail rotor is unnecessary as well as length of the rotor blade can be shortened but has a weakness that the weight of body is increased. In the present study, aerodynamic force measurement on single rotor system equipped with NACA0012 airfoil, which has aspect ratio of 6 and chord length of 35.5 mm, was carried out. And measurement was conducted with blade which has a half size of the former blade by using single motor counter-rotating. Aerodynamic force measurement was acquired by using 6-component balances and coefficients of thrust and power were derived along the pitch angle varying from 0$^{\circ}$ to 90$^{\circ}$ with the increment of 10$^{\circ}$. Those aerodynamic force data will be utilized for the design and production of brand-new counter-rotating rotor blade system which has same thrust with single blade system and provides a good accessibility to building by reducing its blade length.

• 산업기술연구
• /
• 제29권B호
• /
• pp.127-131
• /
• 2009

This paper presents the development of smart counting system that is proper for grains with uneven unit weight or shape. This device can detect the small differences of a light beam and count the pulse from wave shape control, when the grain is going on the light screen, which is made by the light beam screen sensor. It can, different from the former conventional device, distinct the uneven grains for counting detect, by using the dedicated hardware and the software algorithm of the light sensor.

• 동력기계공학회지
• /
• 제21권2호
• /
• pp.35-40
• /
• 2017

In this study, the multi-body dynamics model for a wave energy converter is established. The equations of motions for the mechanical parts of the wave energy converter are derived to analyze the dynamic behavior. A spring method with the same performance as the counter weight method is proposed. The counter weight method and spring method are analyzed for evaluating the performance of the wave energy converter. RecurDyn program which is a kind of commercial multi-body dynamics program is used to perform the dynamic simulation of the wave energy converter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 춘계학술대회 논문집
• /
• pp.87-89
• /
• 1994

The effects of low molecular weight components of LDPE and sample molding condition were investigated to find the orgins for heterocharge in LDPE without any addtives. Low molecular weight chains of LDPE encourages the formation of heterocharge by being charged and migrating the counter electrode. The formation of heteroohage in LDPE was also effected by sample preparation process and the kind of a moling film. When PET film is used as a molding layer, the carbonyl, which may lead to increase the heterocharge, formed at surface of LDPE.