• 한국정보통신학회논문지
• /
• 제12권11호
• /
• pp.2031-2038
• /
• 2008

무선 USB 시스템의 호스트-디바이스 간에 4-way handshake 상호 인증을 위한 PRF(Pseudo Random Function)-256, PRF-64 및 데이터 암/복호 기능을 수행하는 저면적 고속 인증/보안 프로세서 (WUSB_Sec) IP를 설계하였다. PRF-256과 PRF-64는 CCM(Counter mode with CBC-MAC) 연산을 기반으로 구현되며, CCM은 AES(Advanced Encryption Standard) 암호 코어 2개를 사용하여 CBC 모드와 CTR 모드가 병렬로 처리되도록 설계되었다. WUSB_Sec 프로세서의 핵심 블록인 AES 암호 코어는 합성체 GF$(((2^2)^2)^2)$ 연산 기반의 S-Box로 설계되었으며, SubByte 블록과 키 스케줄러가 S-Box를 공유하도록 설계하여 약 10%의 면적을 감소시켰다. 설계된 WUSB_Sec IP는 약 25,000 게이트로 구현되었으며, 120MHz에 서 동작하여 480Mbps의 성능을 갖는다.

• 한국멀티미디어학회논문지
• /
• 제21권8호
• /
• pp.897-908
• /
• 2018

In this paper, we propose a security framework for a cluster drones network using the MAVLink (Micro Air Vehicle Link) application protocol based on FANET (Flying Ad-hoc Network), which is composed of ad-hoc networks with multiple drones for IoT services such as remote sensing or disaster monitoring. Here, the drones belonging to the cluster construct a FANET network acting as WTRP (Wireless Token Ring Protocol) MAC protocol. Under this network environment, we propose an efficient algorithm applying the Lightweight Encryption Algorithm (LEA) to the CTR (Counter) operation mode of WPA2 (WiFi Protected Access 2) to encrypt the transmitted data through the MAVLink application. And we study how to apply LEA based on CBC (Cipher Block Chaining) operation mode used in WPA2 for message security tag generation. In addition, a modified Diffie-Hellman key exchange method is approached to generate a new key used for encryption and security tag generation. The proposed method and similar methods are compared and analyzed in terms of efficiency.

• Carbon letters
• /
• 제26권
• /
• pp.74-80
• /
• 2018

The South Korean Ministry of the Environment has revised the laws relating to the management of interior air quality for multiple use facilities, and recommends maintaining carbon dioxide ($CO_2$) concentration in passenger vehicles below 1000 ppm during operation in urban areas of large cities. However, the interior $CO_2$ concentration of passenger vehicles can rapidly increase and exceed 5000 ppm within 30 min, as observed when two passengers are traveling in urban areas of the South Korean city of Jeonju with the air conditioner blower turned off and the actuator mode set to internal circulation mode. With four passengers, $CO_2$ concentration can reach up to 6000 ppm within 10 min. To counter this, when the actuator is set to external mode, $CO_2$ concentration can be maintained below 1000 ppm, even after a long period of running time. As part of the air conditioning system, alkali-treated activated carbon fiber filters are considered to be far superior to the commercial non-woven filters or combination filters currently commonly in use.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.591-594
• /
• 2005

This paper describes a design of AES-based CCM Protocol for IEEE 802.11i Wireless LAN Security. The CCMP core is designed with 128-bit data path and iterative structyre which uses 1 clock cycle per round operation. To maximize its performance, two AES cores are used, one is for counter mode for data confidentiality and the other is for CBC(Cipher Block Chaining) mode for authentication and data integrity. The S-box that requires the largest hardware in AES core is implemented using composite field arithmetic, and the gate count is reduced by about 23% compared with conventional LUT-based design. The CCMP core designed in Verilog-HDL has 35,013 gates, and the estimated throughput is about 768Mbps at 66-MHz clock frequency.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.293-299
• /
• 2016

Recently, as IoT (Internet of Things) becomes more important, low cost implementation of sensor nodes also becomes critical issues for two well-known standards, IEEE 802.15.4 and IEEE 802.15.6 which stands for WPAN (Wireless Personal Area Network) and WBAN (Wireless Body Area Network), respectively. This paper presents the area-optimized AES-CCM (Advanced Encryption Standard - Counter with CBC-MAC) hardware security engine which can support both IEEE 802.15.4 and IEEE 802.15.6 standards. First, for the low cost design, we propose the 8-bit AES encryption core with the S-box that consists of fully combinational logic based on composite field arithmetic. We also exploit the toggle method to reduce the complexity of design further by reusing the AES core for performing two operation mode of AES-CCM. The implementation results show that the total gate count of proposed AES-CCM security engine can be reduced by up to 42.5% compared to the conventional design.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 춘계학술발표대회
• /
• pp.126-128
• /
• 2023

본 논문에서는 2-bit RISC-V 프로세서 상에서의 경량 블록 암호인 SPECK의 CTR 운용 모드에 대한 최적 구현을 제안한다. RISC-V 상에서의 SPECK 단일 평문과 2개의 평문에 대한 최적화와 고정된 논스 값을 사용하는 CTR 운용모드의 특징을 활용하여 일부 값에 대해 사전 연산을 하는 라운드 함수 최적화를 제안한다. 결과적으로, 레퍼런스 대비 제안된 기법은 단일 평문과 2개의 평문에 대해 각각 5.76배 2.24배 성능 향상을 확인하였으며, 사전 연산 기법을 적용하지 않은 최적 구현 대비 사전 연산 기법을 적용하였을 때, 1% 성능 향상을 확인하였다.

• 한국통신학회논문지
• /
• 제28권11C호
• /
• pp.1077-1087
• /
• 2003

본 논문에서는 IPsec등의 네트워크 보안 프로토콜을 위해 다중모드를 가지는 블록암호시스템의 구조를 제안하고 ASIC 라이브러리를 이용해서 하드웨어로 구현하였다. 블록 암호시스템의 구성을 위해서 AES, SEED, 그리고 3DES 등의 국내외 표준 블록암호화 알고리즘을 사용하였고 네트워크를 비롯한 유/무선으로 입력되는 데이터를 최소의 대기시간(최소 64클럭, 최대 256클럭)만을 가지면서 실시간으로 데이터를 암호화 혹은 복호화시킬 수 있다. 본 설계는 ECB, CBC, OFB뿐 아니라 최근 많이 사용되는 CTR(Counter) 모드를 지원하고 다중 비트단위(64, 128, 192, 256 비트)의 암/복호화를 수행한다. IPsec등의 네트워크 보안 프로토콜로의 연계를 위해 알고리즘 확장성을 보유한 하드웨어로 구현되었고 여러 암호화 알고리즘의 동시적인 동작이 가능하다. 적절한 하드웨어 공유와 프로그래머블한 특성이 강한 내부데이터 패스를 통해 자체적인 블럭암호화 모드를 지원하기 때문에 다양한 방식의 암/복호화가 가능하다. 전체적인 동작은 직렬 통신에 의해서 프로그래밍되고 명령어의 디코딩을 통해 생성된 제어신호가 동작을 결정한다. VHDL을 이용해 설계된 하드웨어는 Hynix 0.25$\mu\textrm{m}$ CMOS 공정을 통해 합성되었고 약 10만 게이트의 자원을 사용하였으며, 100MHz 이상의 클럭 주파수에서 안정적으로 동작함을 NC-Verilog에서 확인하였다.

• Korean Chemical Engineering Research
• /
• 제46권3호
• /
• pp.521-528
• /
• 2008

중공사막 접촉기에 적절한 PVDF 중공사막을 상전이 공정에 의하여 제조하였으며, SEM 과 기체투과도에 의하여 그 특성을 분석하였다. 벤치규모 중공사막 접촉기에서 $SO_2$ 제거를 위한 흡수제는 수산화나트륨 수용액을 사용하였다. 기체는 shell side, 액체는 lumen side로 흐르는 counter-current로 실험하였으며, 흡수제의 농도, 기체의 유속, 액가스비, 유입 $SO_2$ 농도에 따른 영향을 알아보았으며, 수학적 모델링에 의해 막 물질전달계수($k_m$)를 측정하였다. 흡수제의 농도와 액기비가 증가함에 따라 기-액 계면에서 충분한 알칼리도가 제공되므로, 액체막 저항이 감소하며, 총괄물질전달 용량계수는 증가하였다. 기체유속이 증가함에 따라 기체막저항은 감소하게 되므로 총괄물질전달 용량계수는 증가하였다.

• Applied Microscopy
• /
• 제39권1호
• /
• pp.79-83
• /
• 2009

We report a useful method to estimate the electron dose rate which may be a decisive factor to characterize sample properties. Even though most mircoscopes have their own exposure meters, there are several practical concerns when such exposure meters are used to measure the electron dose rate: 1) Specimen should be avoided within the entire area of exposure meter; 2) beam current has to be always recorded whenever the operation mode is changed; 3) the electron dose rate can not be calculated for the beam current beyond the detectable range. To overcome these limitations, we suggest a useful method which utilize a CCD (charge coupled device) camera which is now a popular detector to obtain the final electron micrographs. We have evaluated the CCD sensitivity using the linear relationship between electron current on the exposure meter and counter ratio on the CCD camera which are built in KBSI-HVEM (high voltage electron microscope). Applying the new method, we obtained the CCD sensitivity which are approximately 0.039 counts/$e^-$ and 1.37 counts/$e^-$ for the Top-TV and the HV-GIF CCD cameras, respectively.

• 설비공학논문집
• /
• 제17권2호
• /
• pp.101-109
• /
• 2005

The purpose of this study is to investigate the performance of outdoor heat exchanger for heat pump using carbon dioxide. Two types of fin and tube heat exchangers (2 rows for type A and 3 rows for B) are tested. Both heat exchangers have counter-cross flow and 1-circuit arrangement. Test results such as heat transfer rate, pressure drop characteristics and temperature distribution in the heat exchanger are shown with respect to mass flow rate of refrigerant and frontal air velocity For cooling mode, the minimum temperature difference between air and refrigerant of type B is smaller than that of type A by $1^{circ}C$, but the pressure loss of air side is much higher for type B by $29\%$. It is found that a large temperature gradient of carbon dioxide during gas cooling Process Promotes thermal conduction through tube wall and fins which results in degradation of heat transfer performance. For heating mode operation, type B heat exchanger shows higher heat transfer performance compared to type A. However, because pressure loss of refrigerant side of type B is much greater than that of type A, the refrigerant outlet pressure of type B becomes lower than that of type A.