• 한국지반환경공학회 논문집
• /
• 제4권2호
• /
• pp.77-91
• /
• 2003

연속체 해석을 위한 암반거동 모델로서 널리 이용되고 있는 Hoek-Brown 파괴기준은 1980년도에 발표된 이후 수차례의 수정 보완을 거쳐 1994년에 발표된 Generalized Hoek-Brown 파괴기준식을 토대로 현재 암반을 대상으로 한 지반구조물 해석에 많이 적용되고 있다. 그러나 지반구조물 수치해석시 Hoek-Brown 파괴기준의 적용은 일반적으로 등가의 Mohr-Coulomb 전단강도정수를 산정하여 간접적으로 이용하게 되는데, 이때 등가의 암반 전단강도정수를 암반내 주응력 분포와 상관없이 일정 상수로 적용함으로서 Hoek-Brown 파괴기준의 비선형성을 고려하지 못하는 단점이 있다. 따라서 본 연구에서는 암반사면의 안정성 평가를 위한 연속체 해석시 Hoek-Brown 파괴기준의 비선형성을 고려할 수 있는 해석기법을 검토하고, 수치해석기법에 의한 사면안정검토에 주로 이용되고 있는 강도감소법을 이용하여 암반사면의 안정성을 정량적으로 평가하고자 하였다. 특히 최근에 발표된 수정 Hoek-Brown 파괴기준을 토대로 수정된 등가 Mohr-Coulomb 강도정수 산정법과 사면굴착시 발파 및 응력이완에 의한 암반 교란/손상을 고려한 암반교란상수(Disturbance Factor) D을 이용하여 안정해석을 수행하였다.

• Tribology and Lubricants
• /
• 제22권5호
• /
• pp.252-259
• /
• 2006

Air foil bearing supports the rotating journal using hydrodynamic force generated at thin air film. The bearing performances, stiffness, damping coefficient and load capacity, depend on the rotating speed and the performance of the elastic foundation, bump foil. The main focus of this study is to decide the dynamic performance of corrugated bump foil, structural stiffness and Coulomb damping caused by friction between bump foil and top foil/bump foil and housing. Structural stiffness is determined by the bump shape (bump height, pitch and bump thickness), dry-friction, and interacting force filed up to fixed end. So, the change of the characteristics was considered as the parameters change. The air foil bearing specification for analysis follows the general size; diameter 38.1 mm and length 38.1 mm (L/D=1.0). The results show that the stiffness at the fixed end is more than the stiffness at the free end, Coulomb damping is more at the fixed end due to the small displacement, and two dynamic characteristics are dependent on each other.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1481-1486
• /
• 2007

Frictional laws are criticized with emphasis on their application to bulk metal forming simulation in this paper. Coulomb frictional law and constant shear frictional law are investigated in detail in terms of their effect on metal forming process. A friction sensitive bulk metal forming process, a long-pipe simultaneously shrinking and expanding process, is introduced and the problems of the constant shear frictional law are revealed comparing the predictions obtained by the Coulomb frictional law and the constant shear frictional law with the experiments. It is shown that the constant shear frictional law is improper in the case that the normal stress varies very much from position to position and that the normal stress is low compared with flow stress of the adjacent material. It is also shown that the Coulomb frictional constant is more or less affected by the normal stress.

• Computers and Concrete
• /
• 제4권2호
• /
• pp.119-134
• /
• 2007

External bonding of steel or FRP plates to reinforced concrete (RC) structures has been a popular method for strengthening RC structures; however, unexpected premature failure often occurs due to debonding between the concrete and the epoxy. We proposed a Coulomb criterion with a constant failure surface as the debonding failure criterion for the concrete-epoxy interface. Diagonal shear bonding tests were conducted to determine the debonding properties that were related to the failure criterion, such as the angle of internal friction and the coefficient of cohesion. In addition, an interface element that utilized the Coulomb criterion was implemented in a nonlinear finite element analysis program to simulate debonding failure behavior. Experimental studies and numerical analysies on RC beams strengthened by an externally bonded steel or FRP plate were used to determine the range of the coefficient of cohesion. The results that were presented prove that premature failure loads of strengthened RC beams can be predicted with using the bonding properties and the finite element program with including the proposed Coulomb criterion.

• 한국지진공학회논문집
• /
• 제7권6호
• /
• pp.17-24
• /
• 2003

이 논문의 주된 목적은 지진을 받는 구조물의 비탄성 거동을 제어하기 위해 Coulomb 마찰감쇠기의 제어성능을 산출하는 것이다. 능력스펙트럼법을 이용하여 다양한 건물의 내진성능이 평가되나, 만약 평가된 성능수준이 목표수준에 미치지 못할 때는 추가적인 감쇠비를 산출하게 된다. 추가적인 감쇠비를 얻기 위한 마찰감쇠기의 리더 마찰력은 등가 점성 감쇠의 개념을 사용하여 산정된다. 이와 같이 제안된 방법의 효과를 증명하기 위해, 다양한 주기와 항복 후 강성비를 가진 단자유도 구조물들에 대하여 수치해석을 수행하였다.

• 한국소음진동공학회논문집
• /
• 제26권1호
• /
• pp.55-62
• /
• 2016

Nuclear fuels are always exposed to hot temperature and high speed coolant flow during the reactor operation. Thus the fuel rod accompanies small amplitude vibration due to the turbulent flow. The random vibration causes friction between the fuel rod and the grid structure which provides the lateral supports. The friction is critical to the fuel rod fretting wear, and it degrades fuel performance when a severe wear is developed. LuGre friction model is introduced in the paper, and the performance was evaluated comparing to the classical Coulomb model. It is shown that the developed friction force considering the Coulomb friction is not enough to stop or delay the motion while the stick-slip can be simulated using LuGre friction model. Numerical solutions of the two dimensional spacer grid cell model with the modern friction are also reviewed, and it is discussed that the new friction model simulates well the nonlinear mechanism.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1135-1141
• /
• 2006

Air foil bearing supports the rotating journal using hydrodynamic force generated at thin air film. The bearing performance, stiffness, damping coefficient and load capacity, depends on the rotating speed and the performance of the elastic foundation, bump foil. The main focus of this study is to decide the dynamic performance of corrugated bump foil, structural stiffness and Coulomb damping caused by friction between bump foil and top foil/bump foil and housing. Structural stiffness is determined by the bump shape (bump height, pitch and bump thickness), dry-friction, and interacting force filed up to fixed end. So, the change of the characteristics was considered as the parameters change. The air foil bearing specification for analysis follows the general size; diameter 38.1 mm and length 38.1mm (L/D=1.0). The results show that the stiffness at the fixed end is more than the stiffness at the free end, Coulomb damping is more at the fixed end due to the small displacement, and two dynamic characteristics are dependent on each other.

• Journal of Astronomy and Space Sciences
• /
• 제34권4호
• /
• pp.251-256
• /
• 2017

The electric coupling between the lithosphere and the ionosphere is examined. The electric field is considered as a timevarying irregular vertical Coulomb field presumably produced on the Earth's surface before an earthquake within its epicentral zone by some micro-processes in the lithosphere. It is shown that the Fourier component of this electric field with a frequency of 500 Hz and a horizontal scale-size of 100 km produces in the nighttime ionosphere of high and middle latitudes a transverse electric field with a magnitude of ~20 mV/m if the peak value of the amplitude of this Fourier component is just 30 V/m. The time-varying vertical Coulomb field with a frequency of 500 Hz penetrates from the ground into the ionosphere by a factor of ${\sim}7{\times}10^5$ more efficient than a time independent vertical electrostatic field of the same scale size. The transverse electric field with amplitude of 20 mV/m will cause perturbations in the nighttime F region electron density through heating the F region plasma resulting in a reduction of the downward plasma flux from the protonosphere and an excitation of acoustic gravity waves.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2617-2620
• /
• 2009

Using Coulomb-Yukawa like correlated interaction potentials of integer and noninteger indices the series expansion formulae in terms of multicenter overlap integrals of three complete orthonormal sets of ${\psi}^{\alpha}$‒exponential type orbitals and linear combination coefficients of molecular orbitals are established for the potential of electrostatic field produced by the charges of molecule, where $\alpha$ = 1, 0, ‒1, ‒2,${\cdots}$. The formulae obtained can be useful for the study of interaction between atomic--molecular systems containing any number of closed and open shells when the ${\psi}^{\alpha}$‒exponential type basis functions and Coulomb-Yukawa like correlated interaction potentials are used in the Hartree-Fock-Roothaan and explicitly correlated approximations. The final results are valid for the arbitrary values of parameters of correlated interaction potentials and orbitals. As an example of application, the calculations have been performed for the potential energy of interaction between electron and molecule $H_2O$ using combined Hartree-Fock-Roothaan equations suggested by the author.

• 터널과지하공간
• /
• 제15권3호
• /
• pp.228-235
• /
• 2005

Hoek-Brown의 파괴기준식으로부터 암반의 내부마찰각 및 점착강도를 계산한 후, Mohr-Coulomb의 항복함수를 이용하여 소성 보정이 적용될 수 있는 것으로 알려져 있다. 하지만 본 연구에서는 이러한 계산 과정이 연약 암반이나 낮은 봉압 조건의 암반에 대해서는 적합하지 않다는 사실을 보여주고자 한다. 즉, Hoek-Broun 재료 모델로부터 직접 및 간접적 적용에 의해 소성 보정을 수행하는 과정을 제시하였으며, 이를 통해 직접적 적용이 간접적 적용에 비해, 비선형 파괴면을 더욱 효과적으로 모사할 수 있고, 특히 봉압이 낮은 응력 조건에서 효과적임을 보여주고자 한다.