• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.426.2-426.2
• /
• 2016

Numerous of researches are being conducted to improve the efficiency of $Cu_2ZnSnSe_4$ (CZTSe)-based photovoltaic devices, which is one of the most promising candidates for low cost and environment-friendly solar cells. In this work, we concentrate on the back contact of the devices. A proper thickness of $MoSe_2$ in back contact structure is believed to enhance adhesion and ohmic contact between Mo back contact and absorber layer. Nevertheless, too thick $MoSe_2$ layers that are grown during high-temperature selenization process can impede the current collection, thus resulting in low cell performance. By applying molybdenum nitride as a barrier in back contact structure, we were able to control the thickness of $MoSe_2$ layer, which resulted in lower series resistance and higher fill factor of CZTSe devices. The phase transformation of Mo-N binary system was systematically studied by changing $N_2$ concentration during the sputtering process. With a proper phase of Mo-N fabricated by using an adequate partial pressure of $N_2$, the efficiency of CZTSe solar cells as high as 8.31% was achieved while the average efficiency was improved by about 2% with respect to that of the referent cells where no barrier layer was employed.

• 한국주거학회논문집
• /
• 제13권5호
• /
• pp.77-88
• /
• 2002

This article deals the investigations how to solve the social deficiencies of deteriorate apartments, which is a half cycle of a building and it goes slum clearance and redevelopment. And this proposes an active remodeling and design strategy, management, and housing policies for extending the usage of the resource. Most of apartment housing in Korea is built by the panel wall and slab structure system fur economic price. To remake is possible, even though not designed in flexibility and variation. The remodeling strategies are dwelling unification, transformation of two units to one or three units, addition of a room, changing into commercial and community required spaces, and reshaping of a envelop and facade by addition of a dwelling or dwellings, roof floors, change of materials and colors, and so on. And, all activities in structural aspect are proposed removal in upper part and addition in lower part of an apartment housing. Active remodeling cost a great deal compare to new construction, so any remodeling activities should be based on a minimal interfere and budgets to enhancing the quality in existing building. The final aim of an active remodeling is to enhance the quality in economic values, and to keep original state and to put on the new one in a small part. To promote the active and careful management and rehabilitation, it is necessary to give the positive incentive in terms of architectural law, bank loan, and any redevelopment project should get the remodeling record in national resources.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제31권1호
• /
• pp.20-28
• /
• 2004

소프트웨어 개발 초기에 개발비용, 소묘인력과 기간을 추정하는 것은 소프트웨어공학 분야의 중요하면서도 어려운 문제이다. 기존 모델은 개발업체의 생산성 수준을 고려하지 않고 단순히 기능점수와 노력, 노력과 개발기간 관계에 대한 회귀분석을 통해 개발노력과 기간을 추정하는 모델을 제시하였다. 그러나 동일한 규모의 소프트웨어라도 개발업체의 생산성 수준에 따라 다른 노력의 양이 투입되며, 동일한 노력이 투입되더라도 생산성에 따라 개발기간이 달라진다. 생산성 수준을 고려하지 않은 제안된 모델들은 실제 개발될 프로젝트 적용에 제한점을 갖고 있다. 본 논문은 기존 모텔의 단점을 보완하기 위해 생산성을 고려하여 개발기간을 추정할 수 있는 모델들을 제안한다. 생산성에 기반 하여 다양한 방법으로 개발기간을 추정할 수 있는 모델을 제안하고 모델들의 성능을 비교하였다. 모델 성능 비교 결과 생산성에 기반 하여 소프트웨어 규모로부터 개발기간을 추정하는 모델이 단순하면서도 가장 좋은 결과를 얻었다. 본 모델은 사업 초기에 프로젝트 관리자에게 소프트웨어 개발 기간 의사결정 정보를 제공한다.

• Journal of Biosystems Engineering
• /
• 제26권6호
• /
• pp.545-552
• /
• 2001

Nondestructive methods such as ultrasonic and magnetic resonance imaging systems have many advantages but still much expensive. And they do not give exact color information and may miss some details. If it is allowed to destruct a biological object to obtain interior and exterior informations, 3D image visualization model from a series of sliced sectional images gives more useful information with relatively low cost. In this paper, a PC based automatic 3D visualization system is presented. The system is composed of three modules. The first module is the handling and image acquisition module. The handling module feeds and slices a cylindrical shape paraffin, which holds a biological object inside the paraffin. And the paraffin is kept being solid by cooling while being handled. The image acquisition modulo captures the sectional image of the object merged into the paraffin consecutively. The second one is the system control and interface module, which controls actuators for feeding, slicing, and image capturing. And the last one is the image processing and visualization module, which processes a series of acquired sectional images and generates a 3D volumetric model. To verify the condition for the uniform slicing, normal directional forces of the cutting edge according to the various cutting angles were measured using a strain gauge and the amount of the sliced chips were weighed and analyzed. Once the 3D model was constructed on the computer, user could manipulate it with various transformation methods such as translation, rotation, and scaling including arbitrary sectional view.

• 방송공학회논문지
• /
• 제25권3호
• /
• pp.439-448
• /
• 2020

본 논문에서는 다시점 RGB-D 카메라의 포인트 클라우드 정합을 위한 수정된 최적화 알고리즘을 제안한다. 일반적으로 컴퓨터 비전 분야에서는 카메라의 위치를 정밀하게 추정하는 것은 매우 중요하다. 기존의 연구에서 제안된 3D 모델 생성 방식들은 많은 카메라 대수나 고가의 3차원 Camera를 필요로 한다. 또한 2차원 이미지를 통해 카메라 외부 파라미터를 얻는 방식들은 큰 오차를 가지고 있다. 본 논문에서는 저가의 RGB-D 카메라를 8개 사용하여 전방위 자유시점을 제공할 수 있는 3차원 포인트 클라우드 및 매쉬 모델을 생성하기 위한 정합 기법을 제안하고자 한다. RGB영상과 함께 깊이지도 기반의 함수 최적화 방식을 이용하고, 초기 파라미터를 구하지 않으면서 고품질의 3차원 모델을 생성할 수 있는 좌표 변환 파라미터를 구하는 방식을 제안한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권12호
• /
• pp.5855-5877
• /
• 2017

In view of personal health and disease management based on cost effective healthcare services, there is a growing need for real-time monitoring services. The electrocardiogram (ECG) signal is one of the most important of health information and real-time monitoring of the ECG can provide an efficient way to cope with emergency situations, as well as assist in everyday health care. In this system, it is essential to continuously collect and transmit large amount of ECG data within a given time and provide maximum user convenience at the same time. When considering limited wireless capacity and unstable channel conditions, appropriate signal processing and transmission techniques such as compression are required. However, ISO/IEEE 11073 standards for interoperability between personal health devices cannot properly support compressed data transmission. Therefore, in the present study, the problems for handling compressed data are specified and new extended agent and manager are proposed to address the problems while maintaining compatibility with existing devices. Extended devices have two PM-stores enabling compression and a novel transmission scheme. A variety of compression techniques can be applied; in this paper, discrete cosine transformation (DCT) is used. And the priority of information after DCT compression enables new transmission techniques for performance improvement. The performance of the compressed signal and the original uncompressed signal transmitted over the noisy channel are compared in terms of percent root mean square difference (PRD) using our simulation results. Our transmission scheme shows a better performance and complies with 11073 standards.

• 전자공학회논문지T
• /
• 제36T권2호
• /
• pp.21-31
• /
• 1999

대규모 시스템 제어와 관련하여 몇 개의 부시스템으로 분할하여 처리하는 계층별 제어이론이 많이 연구되어 왔으며 특히 치수가 높은 대규모 비선형 시스템의 경우에 고차의 비선형 미분방정식을 동시에 적분을 해야하고 많은 계산량을 필요로 하므로 해를 구하기가 어려운 문제가 있다. 1980년대 Singh과 Hassan은 상호예측 알고리즘(two level prediction algorithm)을 제시한바 있고 이 방법은 비선형 대규모 시스템의 최적제어에 효과적이나 시스템 행렬 Q, R, S, H에 따라 제한된 최적화 구간에서만 성립되는 등 최적화 구간의 길이와 수렴성 여부가 행렬 값에 영향을 받는 알고리즘상의 단점이 있다. 본 연구에서는 수렴조건으로부터 평가함수에 구속조건(quadratic penalty term)을 부여하지 않는 새로운 개선된 알고리즘을 제시 적용하여 시스템 행렬 결정을 위한 과정 없이 수렴속도의 향상과 함께 최적의 수렴성 및 최적화 구간을 얻도록 했다. 분할된 비선형 시스템의 최적제어를 위해서는, 대수 반복연산만으로 2점 경계치 문제(two point boundary value problem)를 해결함으로써 기존의 수치 해석법에 비해 연산이 간단한 블록펄스 변환 방법을 사용해서 처리했다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권15호
• /
• pp.6429-6436
• /
• 2014

Poly-ADP-ribosylation (PAR) is a post-translational modification of mainly chromosomal proteins. It is known to be strongly involved in several molecular events, including nucleosome-remodelling and carcinogenesis. In this investigation, it was attempted to evaluate PAR level as a reliable biomarker for early detection of cancer in blood lymphocyte histones. PAR of isolated histone proteins was monitored in normal and dimethylnitrosamine (DMN)-exposed mice tissues using a novel ELISA-based immuno-probe assay developed in our laboratory. An inverse relationship was found between the level of PAR and period of DMN exposure in various histone proteins of blood lymphocytes and spleen cells. With the increase in the DMN exposure period, there was reduction in the PAR level of individual histones in both cases. It was also observed that the decrease in the level of PAR of histones resulted in progressive relaxation of genomic DNA, perhaps triggering activation of genes that are involved in initiation of transformation. The observed effect of carcinogen on the PAR of blood lymphocyte histones provided us with a handy tool for monitoring biochemical or physiological status of individuals exposed to carcinogens without obtaining biopsies of cancerous tissues, which involves several medical and ethical issues. Obtaining blood from any patient and separating blood lymphocytes are routine medical practices involving virtually no medical intervention, post-procedure medical care or trauma to a patient. Moreover, the immuno-probe assay is very simple, sensitive, reliable and cost-effective. Therefore, combined with the ease of preparation of blood lymphocytes and the simplicity of the technique, immuno-probe assay of PAR has the potential to be applied for mass screening of cancer. It appears to be a promising step in the ultimate goal of making cancer detection simple, sensitive and reliable in the near future.

• 한국콘텐츠학회논문지
• /
• 제10권4호
• /
• pp.66-75
• /
• 2010

증강현실에서 3차원적 증강은 입력 비디오나 이미지로부터 3차원 구조 복원 및 추적을 필요로 한다. 이를 위해 제안된 기존의 방법들은 대개 정확한 3차원 모델을 사전에 구축해두고 실시간에 대조하는 방식을 취하였는데, 이 방식은 정확한 측정에 기반한 모델이 있어야 한다는 점과 대상물을 일일이 모델링해야 하는 문제점이 있다. 본 논문은 각 대상물별 정밀한 모델 없이 유형별로 일반화된(generic) 모델만을 사용하는 방식을 제안함으로써 층간 이동 등을 허용하는 광범위 이동형 실내 증강현실 응용 가능성을 제시하고자 하였다. 제안한 방법은 일반화된(generic) 모델을 변형(affine transformation)하여 주어진 장면에서 오류 임계치 이내의 정합을 이루는 모델 변형 값인 스케일, 위치, 회전 값을 찾아냄으로써, 그에 따라 정합된 3차원 공간구조에 관해 일관성 있게 증강객체가 배치될 수 있도록 하는 것이다. 이 방법은 정밀 모델링에 드는 시간과 노력 비용을 줄이며, 실험을 통해 크기나 디테일은 다르지만 유사 패턴이 반복되는 통로구조의 복원과 추적에 사용될 수 있음을 보였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.318-324
• /
• 2000

Ultrasonic and magnetic resonance imaging systems are used to visualize the interior states of biological objects. These nondestructive methods have many advantages but too much expensive. And they do not give exact color information and may miss some details. If it is allowed to destruct some biological objects to get the interior and exterior information, constructing 3D image from the series of the sliced sectional images gives more useful information with relatively low cost. In this paper, PC based automatic 3D model generator was developed. The system was composed of three modules. One is the object handling and image acquisition module, which feeds and slices objects sequentially and maintains the paraffin cool to be in solid state and captures the sectional image consecutively. The second is the system control and interface module, which controls actuators for feeding, slicing, and image capturing. And the last is the image processing and visualization module, which processes a series of acquired sectional images and generates 3D graphic model. The handling module was composed of the gripper, which grasps and feeds the object and the cutting device, which cuts the object by moving cutting edge forward and backward. Sliced sectional images were acquired and saved in the form of bitmap file. The 3D model was generated to obtain the volumetric information using these 2D sectional image files after being segmented from the background paraffin. Once 3-D model was constructed on the computer, user could manipulate it with various transformation methods such as translation, rotation, scaling including arbitrary sectional view.