• KIEAE Journal
• /
• v.15 no.4
• /
• pp.77-84
• /
• 2015

Purpose: In 2008, As the green growth policy was presented, Green Building is made any effort to propagation. In this paper, the respective technologies that are able to considerably reduce the energy demands for heating, cooling, hot-water, lighting and ventilation among the variety of technologies were selected. Method: Design factors such as (1) External insulation, (2) Triple glazing window, (3) LED lighting, (4) External venetian blind, (5) Geothermal and (6) Heat recovery ventilator were derived. In addition, energy saving effects in terms of energy demand, energy consumption and energy cost were investigated using EnergyPlus, building energy analysis tool. Result : The results were as follows. (1) It can be seen that high insulated triple glazing window, heat recovery ventilator and external insulation technology is excellent for energy demand. (2) Unlike energy demand, saving effect of energy consumption and energy cost was shown in order of Geothermal > Triple Window > Heat recovery Ventilation> Insulation> LED Lighting > EVB Blind.

• Structural Engineering and Mechanics
• /
• v.66 no.2
• /
• pp.173-183
• /
• 2018

This paper proposes a developed optimization model for steel frames with semi-rigid beam-to-column connections and fixed bases using teaching-learning-based optimization (TLBO) and genetic algorithm (GA) techniques. This method uses rotational deformations of frame members ends as an optimization variable to simultaneously obtain the optimum cross-sections and the most suitable beam-to-column connection type. The total cost of members plus connections cost of the frame are minimized. Frye and Morris (1975) polynomial model is used for modeling nonlinearity of semi-rigid connections, and the $P-{\Delta}$ effect and geometric nonlinearity are considered through a stepped analysis process. The stress and displacement constraints of AISC-LRFD (2016) specifications, along with size fitting constraints, are considered in the design procedure. The developed model is applied to three benchmark steel frames, and the results are compared with previous literature results. The comparisons show that developed model using both LTBO and GA achieves better results than previous approaches in the literature.

• Korean Journal of Human Ecology
• /
• v.22 no.5
• /
• pp.477-490
• /
• 2013

This study explores critical and success factor of benefits and risks for predicting the acceptance of QR code virtual fashion stores. As an exploratory approach, this study conducted focus group interviews(FGI) with 21 panels who had experience with selected QR virtual stores (e.g., Home plus, 11th Street, Pin & Fit). Content analysis was used to generate 184 excerpts and classify into benefits and risks related to QR code virtual stores. With respect to benefits, content analysis identified four factors: Affective appeal, perceived usefulness, ubiquity, and brand promotion. Also, contents regarding perceived risks were classified into four factors: Complexity, lack of information, lack of technology infrastructure, and perceived cost. A managerial implication was discussed for predicting consumer technology acceptance of a QR code virtual store in the fashion retailing market.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.627-630
• /
• 2004

The PID type controller has been widely used in industrial application due to its simply control structure, ease of design, and inexpensive cost. However, control performance of the PID type controller suffers greatly from high uncertainty and nonlinearity of the system, large disturbances and so on. This paper presents a hybrid fuzzy logic proportional plus conventional integral derivative controller (fuzzy P+ID). In comparison with a conventional PID controller, only one additional parameter has to be adjusted to tune the fuzzy P+ID controller. In this case, the stability of a system remains unchanged after the PID controller is replaced by the fuzzy P+ID controller without modifying the original controller parameters. Finally, the proposed hybrid fuzzy P+ID controller is applied to BLDC motor drive. Simulation results demonstrated that the control performance of the proposed controller is better than that of the conventional controller.

• Journal of the Korean Professional Engineers Association
• /
• v.26 no.3
• /
• pp.69-79
• /
• 1993

This paper explains about general considerations and project management for a State of the Art utility supervisory systems. [1] The implementation and management of a supervisory system design project requires both a dedication of resources and application of good communications in order to be suc-cessful. [2] Success is on time delivery of a system to a satisfied customer at the proposal cost, [3] The recent experience of a company plus the collected comments from a number of ex-perienced control center project management provide a guideline for the company who is considering such a project. The Comments reflect typical situations or decision points faced by the project Manage.[2] This paper also attempts to help engineers in the task of specifying buying, and instal-ling a supervisory system[1]

• Journal of Biosystems Engineering
• /
• v.11 no.1
• /
• pp.8-16
• /
• 1986

This study was carried out to develop a microcomputer-based data acquisition system for engine performance test. A low-cost data acquisition system was developed utilizing an "APPLE II PLUS" microcomputer. The developed system consists of microcomputer, RPM counter included frequency-to-voltage converter, preamplifier for two load cells and 8-bit analog-to-digital converter with 16 chnnels. The system simultaneously measures engine speed by means of photointerrupter, torque and fuel consumption by means of load cells with variable sample numbers, sampling intervals and repetitions. The system collects, processes and provides data for storing on the $4{\frac{1}{4}}$ inch floppy disk as well as for writing out on the printer.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.3
• /
• pp.255-259
• /
• 1998

Sixteen Friesian Cows were allocated equally into 4 groups in a $4{\times}4$ Latin square design to evaluate the effects of utilizing bean by-products on the feed intake and milk production. Cows were fed on 4.5% of their body weight fresh alfalfa; the remainder of their requirements were covered by one of 4 experimental concentrate treatments: 1) commercial concentrate (CC), 2) 70% CC + 30% bean hulls (BH), 3) 70% CC + 30% Polished bean (PB) and 4) 70% CC+ 15% BH + 15% PB. Results showed that the inclusion of bean hulls at 30% improved (p<0.05) milk yield, 4% fat corrected milk yield, feed conversion ratio and fat percent of the milk over the other treatments. Feeding cows on a commercial concentrate plus 30% BH or 30% PB or 15% from each of BH and PB decreased the cost of feed per kg milk by 13.6, 2.5 and 1.3 %, respectively, lower than those fed on the commercial concentrate.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.127-128
• /
• 2011

기존에는 통신시장에 진출하려면 막대한 설비투자와 사업권의 획득이 필요했으나 이제는 망을 비롯한 주요 설비 없이도 사업을 할 수 있는 기회가 열렸다. 이러한 통신사업에 대한 신규진출 규제완화 움직임은 이동통신시장 경쟁구도의 변화뿐만 아니라 통신 산업 전반에 큰 영향을 미칠 것으로 기대되고 있다. 본 연구는 정부의 재판매(MVNO)제도의 도입과 관련하여 합리적인 도매대가 산정방안에 대한 고찰을 목적으로 다음과 같은 결론을 도출하였다. COST PLUS 모형과 RETAIL MINUS 모형에 각각 영업이익률과 원가 대비이익률을 적용하여 도매대가를 산출한 결과 원가대비이익률을 적용하여 RETAIL MINUS 모형으로 산출했을 때 가장 높은 도매대가가 산출되었다. 반면 도매대가가 가장 작은 모형은 영업이익률 적용 RETAIL MINUS 모형으로 나타났다. 이러한 결과는 도매대가산정 시 비용의 구분과 이익률의 산정이 중요한 요소로 작용하였으며, 이를 통해 보다 정교한 MVNO 도매대가산정을 할 수 있을 것으로 기대된다.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.196-200
• /
• 2004

The purpose of this study is to examine the image­based atmospheric correction models using the data from Landsat Enhanced Thermal Mapper Plus (ETM+) that have quite similar spectral characteristics to the forthcoming Korea Multi-Purpose SATellite (KOMPSAT)-2 Multi-Spectral Camera (MSC), and the in-situ measured surface reflectance data during satellite overflight. The main advantage of this type of correction is that it does not require in-situ measurements during each satellite overflight. While substantial differences are present between Top-Of-the Atmosphere (TOA) reflectance and in-situ measurements, the results showed that Case 1 based on COST model gives most accurate results among three cases. The accuracy of Case 2 is very close to Case 1 and its values are smaller than in-situ data. No notable features appear between some bands in the Case 3 and in-situ data. It is expected from this study that if the current methods are applied to the IKONOS high resolution data, we will be able to develop the suitable atmospheric correction methods for MSC data.

• Journal of Korean Association for Spatial Structures
• /
• v.16 no.4
• /
• pp.133-140
• /
• 2016

SLIM AU(A plus U-shaped) composite beam had been developed for not only reducing the story height in residential and commercial building, but also saving the cost of floor construction. The structural performance and economic feasibility was sufficiently approved by means of structural experiments and analytical studies. Even though fire resistance of the SLIM AU composite beam was evaluated throughout furnace fire test, the fire performance of the composite beam using finite element analysis is not analysed yet. Therefore the predictions of fire resistance simulations with loading as well as temperature distribution of the composite beam are summarized in this paper.