• 한국입자에어로졸학회지
• /
• 제18권4호
• /
• pp.109-127
• /
• 2022

Recently, low-cost particulate matter (PM) sensors have been widely used in monitoring mass concentration. Maintaining the accuracy of the sensors is important and requires rigorous performance evaluation and calibration. In this study, two commercial low-cost PM sensors(LCS), Plantower PMS3003 and Plantower PMS7003, were evaluated in the laboratory and field with a reference-grade PM monitor (GRIMM 11-D). Laboratory evaluation was conducted with single/mixed particles of PSL (Poly Styrene Latex) in an acrylic chamber at 20℃ and relative humidity of 20%. Field evaluation was conducted inside a building of Yonsei University (Shinchon) from February 12 to March 31, 2022. In both evaluations, LCS measured values became different from reference measured values when the relative humidity was high or the outdoor air PM10/PM2.5 ratio was high. Based on the field evaluation, the LCS measured values were corrected through four different regression analysis models. As a result, the multivariate polynomial regression analysis model showed highest matching with the reference PM monitor (PM2.5 >0.9, PM10 >0.85). In this model, the PM10/PM2.5 ratio and relative humidity were chosen as independent variables.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.712-720
• /
• 2015

A model predictive current control (MPCC) method that does not employ a cost function is proposed. The MPCC method can decrease common-mode voltages in loads fed by three-phase voltage-source inverters. Only non-zero-voltage vectors are considered as finite control elements to regulate load currents and decrease common-mode voltages. Furthermore, the three-phase future reference voltage vector is calculated on the basis of an inverse dynamics model, and the location of the one-step future voltage vector is determined at every sampling period. Given this location, a non-zero optimal future voltage vector is directly determined without repeatedly calculating the cost values obtained by each voltage vector through a cost function. Without utilizing the zero-voltage vectors, the proposed MPCC method can restrict the common-mode voltage within ± V_dc/6, whereas the common-mode voltages of the conventional MPCC method vary within ± V_dc/2. The performance of the proposed method with the reduced common-mode voltage and no cost function is evaluated in terms of the total harmonic distortions and current errors of the load currents. Simulation and experimental results are presented to verify the effectiveness of the proposed method operated without a cost function, which can reduce the common-mode voltage.

• 대한전자공학회논문지TC
• /
• 제39권12호
• /
• pp.547-552
• /
• 2002

본 논문에서는 국내지형환경에서 차세대 이동통신인 IMT-2000을 위한 경로손실을 측정 및 고찰하였다. 이를 위해 국내지형환경을 분류하였으며, 주파수 1.9201GHz에서 비가시(non line of sight) 경로로 수신전력을 측정하였다. 또한 이를 토대로 안테나 복사패턴을 고려하여 경로손실을 계산하였다. 국내지형환경에서 경로손실을 고찰하기 위해 각 지형환경에 대해 계산된 경로손실 데이터를 비교기준모델인 COST-231 HATA Urban Model 기울기로 fitting하고 비교하였다. 결과를 살펴볼 때 국내지형환경의 경우, 비교기준 모델인 COST-231 HATA Urban Model에 비해 도심환경의 경우 약 5dB, 한산한 도심환경의 경우 약 8dB, 밀집한 부심환경의 경우 약 12dB, 부심환경의 경우 약 13dB, 한산한 부심환경의 경우 약 19dB, 도로환경의 경우 약 29dB가 적게 나타남을 확인할 수 있었다.

• 전자공학회논문지B
• /
• 제32B권10호
• /
• pp.1338-1346
• /
• 1995

In this paper, we suggest the implementation of a DGPS system using two low cost commercial C/A code GPS modules and modems and its efficient operational techniques to provide DGPS service which guarantees the position accuracy of better than 10 meters for more users. The proposed DGPS system can be implemented easil at low cost because it needs a GPS module and a modem for each reference station and user. The reference station makes plans of the receiving schedule from the satellite set at each period and then provides the correction data for various satellite sets in a period. The main contribution of this paper is that users can utilize the correction data continuously and efficiently through the recursive least squares lattice filtering method. Experimental results show the position accuracy of better than 10 meters using the suggested DGPS system in almost real time.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.14-20
• /
• 1997

Due to several advantages of Pulse Width Modulated(PWM) Converter, such as unity power factor with low-harmonics and energy regeneration, PWM converter has been widely used in industrial application. In every application of energy conversion equipment, the design and implementation must be carried out considering performance and cost. High quality with low cost is the best choice for energy conversion equipment. High dc link voltage can reduce inverter and motor side losses and system dimension compare to low dc link voltage. Analog controller can make PWM converter cheaper without considerable degradation of the performance than digital controller. This paper shows the simplified analog controller-for 600V dc link voltage using stationary reference frame control and the simulation results.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.168-178
• /
• 2019

Discrete space vector modulation (DSVM) is an effective method to improve the steady-state performance of the finite control set predictive control for permanent magnet synchronous motor drive systems. However, it requires complex computations due to the presence of numerous virtual voltage vectors. This paper proposes an improved finite control set model-free predictive control using DSVM to reduce the computational burden. First, model-free deadbeat current control is used to generate the reference voltage vector. Then, based on the principle that the voltage vector closest to the reference voltage vector minimizes the cost function, the optimal voltage vector is obtained in an effective way which avoids evaluation of the cost function. Additionally, in order to implement double-objective control, a two-level decisional cost function is designed to sequentially reduce the stator currents tracking error and the inverter switching frequency. The effectiveness of the proposed control is validated based on experimental tests.

• 제어로봇시스템학회논문지
• /
• 제5권1호
• /
• pp.79-87
• /
• 1999

For its simplicity and cost effectiveness in implementation, the Inverted DGPS is well suited for some specific applications like automatic vehicle location systems, where the monitoring station needs accurate position of the vehicles in the street. In the Inverted DGPS, the user sends its GPS position and associated satellite informations to the reference station, and the corrections are made at the reference station to get differentially corrected user position. A fundamental requirement in IDGPS is that the user and the reference station must use the same satellites when the corrections are made. But in practice, it is not often satisfied. Inverted DGPS is also suffered from performance degradation as the baseline become large like DGPS. IDGPS system using multi-reference station can resolve this problem. In this paper a simple multi-reference IDGPS algorithm is proposed and some experiments and analysis are peformed. Experiment results show that IDGPS can achieve the positioning performance as accurate as the DGPS can provide.

• 한국정보시스템학회지:정보시스템연구
• /
• 제15권3호
• /
• pp.107-129
• /
• 2006

The purpose of this study is to provide and validate an IT cost model hi which we link among cost center, cost object and flexible cost driver. in order to accomplish this purpose, this study utilizes ethnographic research methodology. At first we develop the cost model where the flexible cost driver is the distribution basis of overhead cost. For each cost driver, unit cost management model is also proposed. Then we employ the structured design methodology to validate the model. Based on the IT Cost requirements of a case company, the IT cost system was designed and developed for its test. The result shows the model we developed in this study is appropriate for managing IT resources and further, can be used as a reference model for calculating chargeback rates of other departments and IT budget of IT department.

• 대한토목학회논문집
• /
• 제41권2호
• /
• pp.151-159
• /
• 2021

국내 건설공사 단가의 적정성과 시장 상황과의 괴리에 대한 논란은 오랜 기간 지속되어 왔다. 국내 건설공사 단가는 특정 소수의 공공기관이 주체가 되어 수립되는 공공기관 중심의 Top-Down 방식으로 수립된다. 실제 시장가격은 유가, 자재비, 노무비 등에 따라 변동이 심하며 소수의 공공기관에서 수많은 업체의 시장가격에 대한 방대한 조사를 수행하여 단가를 수립한다는 것은 사실상 물리적으로 불가능하다. 해외 선진국의 경우, 공공 건설공사 단가의 보완하기 위한 수단으로 민간업체가 주체가 되어 수립되는 민간 중심의 다양한 원가정보가 함께 존재하며 국내에서도 공공뿐만 아니라 민간 중심의 단가 정보 확대를 통한 효율적인 공사비관리가 필요하다. 본 연구에서는 국내 공공 중심의 건설공사 단가체계의 한계를 보완하는 민간 중심의 Bottom-Up 방식의 단가 수립 체계 개발을 목적으로 개발의 기본 방향을 설정하기 위한 연구를 수행하였다. 국내 건설공사 단가 수립 체계 분석을 통하여 문제점을 도출하고 해외 건설공사 단가 체계를 벤치마킹하여 개선 방향을 도출하였으며, 분석결과를 종합하여 국내 민간 중심의 건설공사 단가 수립 체계 개발을 위한 기본 방향을 설정하였다.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1398-1408
• /
• 2018

In order to further improve the steady-state control performance of model predictive torque control (MPTC), a double-vector-based model predictive torque control without a weighting factor is proposed in this paper. The extended voltage vectors synthesized by two basic voltage vectors are used to increase the number of feasible voltage vectors. Therefore, the control precision of the torque and the stator flux along with the steady-state performance can be improved. To avoid testing all of the feasible voltage vectors, the solution of deadbeat torque control is calculated to predict the reference voltage vector. Thus, the candidate voltage vectors, which need to be evaluated by a cost function, can be reduced based on the sector position of the predicted reference voltage vector. Furthermore, a cost function, which only includes a reference voltage tracking error, is designed to eliminate the weighting factor. Moreover, two voltage vectors are applied during one control period, and their durations are calculated based on the principle of reference voltage tracking error minimization. Finally, the proposed method is tested by simulations and experiments.