• 대한건축학회논문집:구조계
• /
• 제36권3호
• /
• pp.147-157
• /
• 2020

With the increasing obligation to reduce greenhouse gas emissions to the building sector, the government has been gradually expanding its obligation to zero-energy buildings since 2020. Since the ZEB certification took effect in 2017, 48 preliminary and main certifications have been completed as of March 2019, and most of them are public buildings or even certified, but have earned Grade 5 of ZEB. This means that compared with the number of annual building permits registered in Korea, the figure is insignificant, and that it receives little if not mandatory. Therefore, this study investigated empirical cases of ZEB additional construction cost and conducted cost benefit analysis according to changes in ZEB additional construction cost based on a preliminary feasibility analysis project recently conducted by the KDI. In addition, considering the public buildings, the social costs were considered, and the cost-benefit analysis method was the same as the KDI's preliminary feasibility analysis method. The analysis shows that if the ratio of ZEB additional construction cost is more than 5 percent, it is analyzed that there is no economic feasibility, and considering that the ratio of additional construction cost in the cases of ZEB in Korea is 17 percent to 38 percent, it will not be easy to obtain ZEB certification in terms of cost. Finally, to narrow these differences in cost and economic aspects, the overseas low energy and ZEB incentive examples proposed measures such as the concept of subsidy payment in Illinois and the compensation of social costs to private ZEB.

• 설비공학논문집
• /
• 제17권6호
• /
• pp.560-568
• /
• 2005

The cost accounting of electricity and heat produced from an energy system is important in evaluating the economical efficiency and deciding the reasonable sale price. The OECOPC method, suggested by the author, was applied to a 650 MW combined cycle cogeneration system having 4 operating modes, and each unit cost of electricity and heat products was calculated. In case that a fuel cost is ${\\}400/kg$ and there are no direct and indirect cost, they were calculated as follows; electricity cost of ${\\}23,700/GJ$ at gas-turbine mode, electricity cost of ${\\}15,890/GJ$ at combined cycle mode, electricity cost of ${\\}14,146/GJ$ and heat cost of ${\\}6,466/GJ$ at cogeneration mode, and electricity cost of ${\\}14,387/GJ$ and heat cost of ${\\}4,421/GJ$ at combined cycle cogeneration mode. Further, these unit costs are applied to account benefit on this system. Since the suggested OECOPC method can be applied to any energy system, it is expected to contribute to cost accounting of various energy systems.

• KIEE International Transactions on Power Engineering
• /
• 제5A권3호
• /
• pp.286-292
• /
• 2005

As the power industry moves towards open competition, there has been a call for methodology to evaluate power system reliability by using composite interruption cost. This paper presents algorithms to evaluate the interruption cost of distribution power systems by taking into consideration the failure source and the composite customer interruption cost. From the consumer's standpoint, the composite customer interruption cost is considered as the most valuable index to estimate the reliability of a power distribution system. This paper presents new algorithms that consider the load by customer type and failure probability by distribution facilities while calculating the amount of unserved energy by customer type. Finally, evaluation results of unserved energy and system interruption cost based on composite customer interruption cost are shown in detail.

• 전기학회논문지
• /
• 제61권10호
• /
• pp.1393-1398
• /
• 2012

Due to environmental regulation and technical improvements, renewable energy sources (RES) are increasingly penetrated and operated in power systems. Clean energy technologies have become cost-competitive with conventional power systems, and in the near future, the generation cost of RES is expected to approach grid parity. In this situation, it should be considered an extraordinarily important issue to be maximized resulting in utilization of RES as well as to develop technologies for efficiency improvement of RES. Therefore, in this paper, the method for determining an optimal installed capacity and interconnected location of RES is proposed in order to minimize the cost of energy not supplied, which can contribute to improve distribution reliability.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.243-248
• /
• 2008

The purpose of this study is to introduce alternative cost-effectiveness analysis method of DSM investment programs. This alternative method is Value Test method which consider the effects of DSM investment program on customer value. And this method was applied for actual DSM investment program in natural gas domain. By utilize this method to evaluate cost-effectiveness of DSM investment programs, it is expected to make right decision to enforce and complement those programs.

• 한국태양에너지학회 논문집
• /
• 제24권3호
• /
• pp.93-100
• /
• 2004

This study aims to presents the applicability of economic measures for renewable energy The basic principle and method of economic analyses were investigated and total life cycle cost considering environmental costs according to $CO_2$ generation. In case study, adaptation of new small wind power system to buildings were proved to produce a profit if it is considered the environmental cost and increment of energy prices. And so the economic measures can be used not only for the investment decisions for economic analysis but also for the comparative analysis of environmental cost and economic profits.

• 한국산학기술학회논문지
• /
• 제22권1호
• /
• pp.603-613
• /
• 2021

한국은 건물부문 온실가스 감축 목표 달성을 위한 핵심정책으로 2020년부터 공공부문 신축 건축물을 대상으로 제로에너지건축물 인증 의무화를 시행하였다. 이 논문은 제로에너지건축물을 활성화 시키고자 하는 정책 환경에서 건축 관계자들이 제로에너지건축 구현에 의사결정을 위해 참조할 수 있는 에너지절감 기술과 경제성 요인을 제시하는 것이 목적이다. 본 연구를 위해 최근 3년간 건축물 에너지효율등급 인증 자료와 공공기관을 대상으로 공사비 세부 내역서 자료를 수집하여 건축물 에너지 항목에 대한 공사비를 분석하였다. 또한, 건축물 에너지효율등급 인증 자료를 바탕으로 베이스라인 건축물의 각 에너지항목별 에너지성능을 도출하였으며, 베이스라인 건축물의 에너지항목에 대해 단계적으로 에너지성능 값을 상승을 시키는 반복적 시뮬레이션을 통해 제로에너지건축물의 에너지항목별 에너지성능 값을 도출하였다. 최종적으로 도출된 베이스라인 건축물과 제로에너지건축물의 에너지성능 값에 조사된 에너지항목별 공사비를 적용하여, 베이스라인 건축물과 제로에너지건축물의 에너지항목별 공사비를 도출하였다. 그 결과 제로에너지건축물을 구현하는 데 조명설비가 10.5%로 에너지절감에 가장 큰 기여를 하며, 냉·난방 시스템의 공사비 증가분이 9.1%로 가장 작은 것으로 분석되었다.

• 한국지열·수열에너지학회논문집
• /
• 제7권1호
• /
• pp.59-64
• /
• 2011

Feasibility study on energy saving system by utilizing exhausted heat from subway, which is one of the unused energy, was carried out. General heat source system using absorption chiller-heater was used for comparing to the energy saving system, and payback period method using initial cost and running cost of two systems, was used to perform economic estimation. Payback period was about ten years, and this period might be shortened if nation's economic support enact.

• 에너지공학
• /
• 제15권1호
• /
• pp.14-22
• /
• 2006

원자력발전과 신재생에너지발전에 대하여 과학적, 객관적 검토없이 다양한 정책과 주장이 제기되고 있다. 본 연구에서는 국가별 에너지정책을 조사 분석하고 총 34개의 가능한 전원구성 시나리오를 도출하였다. 이들 시나리오가 우리나라 전력정책에 도입될 경우를 가정하여 전력단가를 계산하였다. 전력단가 계산방법은 현재 우리나라 전력시장에서 사용하는 한계가격결정 방법을 사용하였고 발전원별로 표준건설비 및 운영비를 적용함으로써 계산을 단순화하였다. 계산결과 송배전 비용과 사업자의 이윤을 제외한 현행 전원 구성에 대한 전력단가는 평균 22.18원/kWh이고 전원구성비에 따라 19.74에서 164.07원/kWh까지 분포하였다. 원자력발전비율이 증가할수록 전력단가는 낮아졌고 신재생에너지 발전비율이 증가할수록 전력단가는 높아졌다. 주목할 만한 것은 신재생에너지 발전비율이 20%를 넘어서게 되면 값싼 기저발전을 활용할 수 없게 되어 전력수요가 적은 시간대에 전력단가가 오히려 상승하였다.

• 한국태양에너지학회 논문집
• /
• 제28권6호
• /
• pp.70-77
• /
• 2008

The purpose of this study evaluates a feasibility and economical efficiency of new renewable energy. According as weather change is serious problem now days, every people make attention to the reduction of greenhouse gas. The revitalization of new renewable energy creates the variety of energy source, stability of energy supply and reduction of greenhouse gas. In this study evaluates a feasibility and economical efficiency from new renewable energy of various photo voltaics, wind power, small hydro and biogas. Feasibility does in standard of technical characteristic, politic support, marketability, establishment present condition and development aim. Economical efficiency does in standard of developmental unit cost, utilization factor, equipment life, politic support cost, interest ratio. The results of this study were as follows photo voltaics, wind, small hydropower, biogas in order feasibility is high. Developmental unit cost, utilization factor, equipment life, politic support cost and analyzed the relationship of interest ratio fluctuation and economical efficiency. From all new renewable energy the utilization factor most is important in economical efficiency but necessary utilization factor is difficult because environmental problem.