• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.753-759
• /
• 1993

The research and motor octane numbers (RON & MON, respectively) of a gasoline are dynamic measures of its quality of performance as a fuel. ASTM standard engine test methods (RON:ASTM D-2699, MON:ASTM D-2700) have been used for determining the octane numbers (RON,MON)of gasolines. But these methods have been widely criticized because their repeatability and reproducibility of the test method are very poor. In addition to these objections, the cost and operation time involved in measuring by the standard method led to searches for "non -engine" methods (Gas Chromatographic method, Nuclear Magnetic Resonance Spectroscopic method). In this study, we determined the carbon type structural compositions of the gasolines by $^{13}C-NMR$ spectroscopy and predicted the octane number (RON & MON) with good accuracy. we presented an assessment of the effects of molecular structural composition on octane numbers.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.5
• /
• pp.426-432
• /
• 2000

Field experiment was performed from August 1996 to December 1999 to examine the feasibility of constructed wetland system for sewage treatment in rural areas. A pilot system was installed in Konkuk University and the effluent of septic tank for school building was used as an influent to the wetland treatment basin. The system was composed of sand and reed, and operated continuously including winter time. Average removal rate of about 70% was observed for BOD, COD, and SS, about 50% for T-P, and about 25% for T-N. The reason for poor T-N removal might be due to high loading rate and short retention time. The system demonstrated satisfactory effluent concentration and stable performance in growing season. And it also worked adequately in wintertime even below $10^{\circ}C$ without freezing, and removal was still significant. The amount removed in BOD, COD, and SS was almost the same as in the growing season, and the amount removed in nutrients was about half of the one in growing season. Overall performance of the experimental system was compared with existing data base (NADB, 1994), and it was within the range of general system performance. As study period increased, removal rates for BOD, COD, SS, and T-P were consistently maintained and even enhanced, but removal rate for T-N decreased slightly. Wetland system was thought to be a feasible alternative for sewage treatment in rural area considering its low cost and low maintenance requirement. However, the effluent of the experimental wetland system often exceeded current effluent water quality standards, therefore, further treatment could be required if the effluent should be discharged to public waters. Wetland system of interest locates in rural area and is a part of rural ecosystem, therefore, ultimate disposal of reclaimed sewage for agricultural purpose or subsequent land treatment might be available and further research in this matter is recommended.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.3
• /
• pp.399-405
• /
• 1996

The present buried contact (BC) solar cell research at SAIT includes the development of a processing sequence suitable for production of the single sided (SS) BC solar cells. This paper presents some results for large area ($45cm^{2}$) SSBC cells fabricated on FZ and CZ silicon substrates. Cell efficiencies in excess of 18% fabricated on FZ, p-type, 0.5 ohm-cm, and over 16% on CZ p-type, 10~20 ohm-cm, wafers have been demonstrated. Both the FZ and CZ wafers were chemically textured. These results are preliminary and the exploration of double sided (DS) sequence, which is the future BC structure would lead to over 17% and 20% efficiency cells on CZ and FZ substrates respectively. The cost of solar cells can be reduced further if the many high temperature steps can be reduced to only one. This would be very advantageous to very poor quality substrates such as the CZ grown wafers.

• Journal of Environmental Impact Assessment
• /
• v.18 no.6
• /
• pp.461-467
• /
• 2009

This paper provides two case studies of environmental impacts with socio-economic values. The first case is on flood protection levees conducted from 2003 to 2004 in Phu Tan district, An Giang province. The impacts were found by comparing full flood protection levees area (FFPL) to non-full flood protection levees area (NFFPL). Participatory Rural Appraisal (PRA) tools per each group of rich, middle, and poor people were used to list the impacts. Then, major impacts were selected by ranking and interviewing 60 households per site, and assessed by Cost Benefit Analysis (CBA) in rice production from 1996 to 2002 between two areas. The tested research indicated moving system of NFFPL to that of FFPL lost about 11 million VND/ha/year. The second case is on impacts of Penaeid shrimp farming conducted in Duyen Hai District, Tra Vinh Province in 2004-2005. Ninety households and 12 local officials were interviewed. Four PRAs were conducted and 36 water samples were taken inside and outside shrimp pond to measure values of DO, COD, Fe total, TSS, N-$NO_3{^-}$, N-$NH_4{^+}$, P-$PO{_4}^{3-}$, and Chlorophyll-a. Research results showed only 36.7% of the households got profit from shrimp farming. Highest financial efficiency was 0.72 for the semi-intensive system. Tested water indicators showed surface water quality did not match Vietnamese standard for surface water in coastal area (TCVN 5943-1995) and in rain. The water was very muddy and contaminated by organic aluminum. Summarily, the impacts were clarified more obviously via adding socio-economic values to assessment. Importantly, the values were transformed to household's income which is an indicator for policy-makers to consider the impacts obviously. Besides, data of different group of people impacted are cases contributing to consideration of the impacts in an appropriate social level.

• Korean Journal of Medicinal Crop Science
• /
• v.18 no.2
• /
• pp.74-78
• /
• 2010

This experiment was carried out to select suitable organic matter in To-jik nursery (self soil nursery) for complement To-jik nursery's defects that are deterioration of raw material by poor quality of seed ginseng and reduction of the quantity in seed ginseng production. Organic matter used were Yacto, rice bean, defatted rice bran, soybean cake and their mixture. As follows, bulk density in soil physical property by treating organic composts was the greatest in soybean cake and the next was followed by mix, Yacto, defatted rice bran, and rice bran treatment in order. Soil pore space ratio was totally the opposite; that was rice bran the first and followed by defatted rice bran, Yacto, mix and soybean cake treatment. The incidence rate of damping off by treating organic composts was 1.5% in both soybean cake and mix while the others was 1.0%. Emergence time was the same among treatment on April 16 and Emergence rate was the highest at 73% in Yacto. There was no significant differences among treatment in the growth of aboveground part but it was a little better in defatted rice bran treatment. In Yacto treatment, the growth of underground part, total root number per kan, rate of first grade ginseng seedling, and rate of usable ginseng seedling etc. were entirely higher but there was little differences. Using defatted rice bran was slightly lower in productivity compared to Yacto, but the possibility was high as a alternative for Yacto in a view of managing cost down.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.52-58
• /
• 2013

Operation Abstract : Operational cost required for navigating a ship may differ from according to type, scale, economic speed, navigation area and other factors. However, it is known that the fuel oil price ratio takes 50~60 %. It is the current trend because of the use of poor quality fuel and it is reviewed even for small to medium sized ships to save the operational costs due to the recent rise of international oil price. Furthermore, ocean carriers are taking action to low speed navigation as the alternative method of reducing fuel consumption. Hence, in this study, fuel consumption of main engine was measured by using actual operating ship data compared with sea speed at sea. It was suggested that the area of M/E's load(70 %) lower than NCR is the optimal navigating condition through the relation between speed and fuel consumption compared with advance ratio together with the load.

• Journal of Korean Library and Information Science Society
• /
• v.43 no.2
• /
• pp.77-98
• /
• 2012

Contracting out became popular in the public library sector since the early of 2000s. It is expected to lower cost of service provision, improve the quality of service provision, better timeliness of service through the discipline of the market and open competition. In practice the expectation was questionable. The numerous failures indicate either poor contract specification or unsuitability of the chosen contractor. The study analyzed 3 case studies of local governments where the entire entity of the public libraries service were decided contracting out and developed 5 criteria and 18 specific evaluation items as alternative evaluation structure. This evaluation model is expected to help to choose a suitable contractor in pubic library management.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.169-174
• /
• 2019

This paper propose a system to notify the user that detects failure of malfunction of smart farm ICT devices. As the fourth industrial revolution approaches, agriculture is also fused with ICT technology to improve competitiveness. Smart farming market is rapidly growing every year, but there is still a lack of standardization and certification systems. Especially, smart farm devices that are widely used in Korea are different in product specifications, software and hardware are developed separately, and quality and compatibility are poor. Therefore, a system that can recognize the abnormality of the equipment due to the frequent damage of farmers using low cost smart farm equipment is needed. In this paper, we review smart farm domestic and overseas policy trends and domestic smart agriculture trends, analyze smart farm failure or malfunctions and proactively prevent them, and propose a system to inform users when problems occur.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.1 s.35
• /
• pp.57-65
• /
• 2007

Rebar work is a labor intensive operation, and with labor shortage and high-wage era, the cost is rising, so re-bar manufacturing system in plant is adapted. However there remains a lot of problems. Although manufacturing system in plant, which greatly effects the building's safety, endurance, and construction time, is an important phase in construction, it holds serious problem of quality and productivity deterioration due to its characteristic of intensive-labor and maintaining of old work methods resulting in poor management, and costs increase. Therefor in this study to investigate current situation and problems of rebar work in plant and to find methods of betterment, a survey was conducted to factory engineers in 18 companies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.414-415
• /
• 2005

A solar cell is an element to transform the solar light energy into the electric energy in a moment. The single crystal element of high quality on which many studies were conducted in the past has a high efficiency of energy transformation, but its price competitiveness is so poor that it has failed to be popularized However, recently, in terms of an environment-friendly alternative energy, studies on applicability of the polycrystal solar cell have been actively under way. Among subject substances for such solar cell, $CuInSe_2$ has several good physical properties so that the greatest attention is paid to it as an optical absorption layer material for a low-cost solar cell of high efficiency. In order to manufacture the $CuInSe_2$ compound thin film, the unit element was deposited by using the sputtering method and the evaporation method and the heat treatment process was used in an electric furnace. Thereby, we intended to get a single-phase $CuInSe_2$ compound thin film.