• 자원ㆍ환경경제연구
• /
• 제22권2호
• /
• pp.367-391
• /
• 2013

후쿠시마원자력발전소의 사고를 계기로 원전의 안전대책비용, 사고위험대응비용과 같은 외부비용들의 존재가 부각되고 있다. 이에 본 연구는 원전의 외부비용들 중에서 추가안전대책비용과 사고위험대응비용을 추정하고, 이를 발전원가 및 전기요금에 반영하여 변화정도를 살폈다. 원전의 추가안전대책비용은 70~90%의 이용률에서 0.53원/kWh~0.80원/kWh으로 원전의 발전원가에 큰 영향을 미치지는 않는다. 사고위험대응비용은 원전사고피해규모별, 사고발생빈도별, 이용률별로 0.0025원/kWh~26.4188원/kWh로 추정되었다. 사고위험대응비용을 포함시키면 원전발전원가는 47.58원/kWh~85.92원/kWh가 된다. 2011년을 기준으로 사고위험대응비용을 내부화한 경우의 전기요금의 증가율은 70~90%의 이용률에서 0.001%~10.0563% 로 추정되었다. 본 연구는 원전의 외부비용을 내부화하는 방법으로서 외부비용을 발전원가에 포함하여 전기요금에 반영하였다. 본 연구는 지금까지 우리나라에 논의되지 않았던 원전 외부비용을 내부화하는 방법의 하나가 될 것이다.

• 한국도로학회논문집
• /
• 제13권4호
• /
• pp.167-175
• /
• 2011

효율적인 도로의 설계와 관리를 위해서는 도로건설의 경제성 분석이 중요하며 이를 위해서는 도로 상태별 차량별 유류소모량의 평가가 필요하다. 도로에서는 초기 건설비용, 유지보수비용, 차량운행비용, 지정체비용 등이 발생되는데, 도로의 경제성 분석을 위해서는 초기 건설비용, 유지보수비용 등과 같은 관리자비용과 차량운행비용, 지정체비용 등과 같은 이용자비용을 모두 포함한 사회적 비용이 고려되어야 한다. 이 중 차량운행비용은 교통량에 따라 그 비용이 변화되므로 차량운행비용 항목의 큰 부분을 차지하는 유류소모량 또한 교통량에 따라 변화하게 된다. 그런데 유류소모량은 차량의 주행속도 및 도로포장의 상태, 특히 평탄성에 따라 크게 변화되므로 도로의 경제성 분석을 위한 차량운행비용의 산정을 위해서는 주행차량에 대해 도로 상태에 따른 유류소모량을 평가하여 경제성 분석에 반영해야 할 필요가 있으나 아직 이를 고려하지 못하고 있는 상황이다. 본 연구에서는 국내에서 운행되는 승용차에 대해서 도로 상태별 유류소모량 추정모델을 개발하였다. 우선 우리나라의 교통시설 투자평가 및 도로건설의 예비타당성 조사에서 차량운행비용 산정을 위해 사용되고 있는 주행속도와 유류소모량의 관계식을 고찰하고, 승용차를 대상으로 도로포장의 평탄성에 따른 유류소모량 변화의 관계를 실제 도로에서 실측하여 평탄성과 유류소모량 변화의 관계를 분석하였다. 실험 결과, 평탄성에 따른 유류소모량의 변화는 평탄성이 1m/km 증가하였을 경우 100km 주행시 약 $80m{\ell}$ 정도의 비율로 유류소모량이 증가하는 것으로 확인되었다. 따라서 도로의 설계 및 유지관리에 있어서 보다 정확한 경제성 분석을 수행하기 위해서는 도로포장의 평탄성에 따른 유류소모량 변화를 고려해야 할 필요가 있다.

• Journal of Preventive Medicine and Public Health
• /
• 제29권2호
• /
• pp.347-357
• /
• 1996

Although occupational low back pain accounts for $20\sim40%$ of all occupational illness and injury, there are limited numbers of studies regarding the effectiveness of back school program. The objective of this study was to evaluate the economic benefit of back school program for early return to work of occupational low back pain patients in the current occupational injury compensation and management system. The cost-benefit analysis in this study was conducted to evaluate the relative magnitude of benefit to cost. The total cost was estimated by calculating the value of components in back school program according to governmental budget protocol. The back school program was consisted of three major approaches, pain center, work-hardening program and funcional restoration program and each of components had various facilities and experts. The total amount of cost was estimated as 250,866,220 won per year. The most promising type of back school program were quite intensive (a 3 to 5-week stay in a specialized center), therefore, if we adopted the 5-week stay course, 10 courses could be held in a year. Following to the medical act, 20 patients per doctor could participate in a each course, ie, total 200 patients in a year. As a result, we could estimate the cost of 1,254,331 won a patient. We estimated the benefit by using data of a few local labor offices about average medical treatment beneficiary and off-duty beneficiary of 46 occupational low back pain patients in 1994. Ullman and Larsson (1977) mentioned that the group of chronic low back pain patients who participated in back school program needed less time to recover by 48.4% of beneficiary duration. And in the trying to estimate the benefit, we asked 10 rehabilitation board certificate doctors about reduction proportion of treatment cost by introducing back school program. The answered reduction proportions were in the range of $30\sim45%$, average 39%. As a final result, we could see that the introduction of back school program in treatment of chronic occupational low back pain patients could produce the benefit to cost ratio as 3.90 and 6.28. And we could conclude that the introduction of back school program was beneficial to current occupational injury compensation and management system.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.384-389
• /
• 2006

최근 경량전철 건설사업에 대한 수요가 증가하고 있으며, 경량전철 건설 사업은 주로 민자사업의 형태로 추진되고 있다. 따라서 사업에 투자할 비용을 계약기간 동안 해당 시설물 운영을 통해 수익창출을 해야 하는 민간건설업체 입장에서는 생애주기측면에서 보다 정확한 비용의 산정이 요구되고 있다. 특히, 경량전철 건설사업에 있어서 비용측면에서 많은 부분을 차지하고 있는 교량은 기존의 생애주기비용 산출방식보다 정밀한 비용 산출이 필요하였다. 이에 본 연구에서는 문헌고찰을 통해 LCC 분석 모델을 개발하고, 비용분류체계를 제시하였다. 제시된 비용분류체계를 바탕으로 경량전철 교량 상부구조 형식별 공사비와 보수 ${\cdot}$ 보강 ${\cdot}$ 교체 이력자료를 바탕으로 비용발생주기 및 비용단가 등을 수집 ${\cdot}$ 분석하였다. 또한, LCC분석을 위한 기본적인 가정사항을 설정한 후, 각 항목별 실적자료 정보를 활용하여 LCC 측면에서의 경제성 평가를 실시하였다. 그간 경량전철을 비롯한 철도교량에 대한 LCC분석연구가 많이 이루어지고 있지 않은 상황임을 감안할 때, 본 연구를 통해 제시된 비용분류체계와 유지관리 관련 데이터는 철도교량의 체계적인 유지관리 활동에 대한 기반이 될 것으로 기대된다.

• 교육시설
• /
• 제14권4호
• /
• pp.34-42
• /
• 2007

The investment of BTL(Build-Transfer-Lease) projects for the educational facilities has been increased since 2005. However, many trial errors and problems have been occurring due to the lack of inspection criteria in maintenance cost for the lift cycle of the facilities. Thus, purpose of this study is to derive regression equation for the daily inspection and the regular inspection through analysis of CAD data in order to set the inspection criteria. It is possible to calculate economical maintenance cost of BTL project in educational facilities using criteria of inspection time through the regression equation developed in this study.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.417-425
• /
• 2013

According to industrialization and urbanization the number of increasing cars is attributable to an explosive increase of the vehicle emissions. In this study, in consideration of the population and local transportation characteristics of South Chungcheong Province the environmental and economic cost-benefit analyses are performed to evaluate whether the CNG bus conversion gives what kind of effects. Based on the analysis result the expansion and distribution plan of CNG bus is proposed for South Chungcheong Province, and the local supply policy model is also proposed considering the acquisition and management of the economic situation of CNG charging infrastructure and the small transportation companies.

• 신재생에너지
• /
• 제10권3호
• /
• pp.6-13
• /
• 2014

This paper presents a computational study of thermal performance and construction cost of horizontal ground heat exchangers (GHEs). GLD (ground loop design) simulations of various type of GHEs were carried out. Construction costs were also calculated based on standard estimating, and compared with vertical type GHE system. Besides that, dummy regression analysis was conducted to study the influence of design parameters on the simulation results in horizontal ground heat exchanger system.

• 한국유기농업학회지
• /
• 제13권2호
• /
• pp.145-159
• /
• 2005

The objectives of this study were to analysis satisfaction and additional cost scale about environmental-friendly agri-product school meal program. To analysis satisfaction about environmental-friendly agri-product (EFAP), parent' survey were conducted residing in Cheonan city. The sample size of the survey is 304 respectively. As a result, parents of students recognized that EFAP is good for their children as well as they really want to change food material from general agri-product to EFAP. Therefore, environmental-friendly agri-policy to be more focused on consumption behavior and food security needs. In order to perfectly change food material to EFAP, about l trillion won will be additionally needed. It means that the market demand of EFAP will be dramatically increased. On the other hand, safe school meal program is one of the most important in a child's life, vital for proper growth and development.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.92-99
• /
• 2004

The errors can cause the serious loss of the performance of a precision machine system. In this paper, we proposed the method of allocating the alignment tolerances of the parts and applied this method to get the optimal tolerances of a Confocal Scanning Microscope. In general, tight tolerances are required to maintain the performance of a system, but a high cost of manufacturing and assembling is required to preserve the tight tolerances. The purpose of allocating the optimal tolerances is minimizing the cost while keeping the high performance of the system. In the optimal problem, we maximized the tolerances while maintaining the performance requirements. The Monte Carlo Method, a statistical simulation method, is used in tolerance analysis. Alignment tolerances of optical components of the confocal scanning microscope are optimized to minimize the cost and to maintain the observation performance of the microscope. We can also apply this method to the other precision machine system.

• 수산경영론집
• /
• 제39권1호
• /
• pp.63-85
• /
• 2008

The objective of this study is to review the methodology of economic analysis of fishing ports by examining the economical feasibilities of a national fishing port (Jeongja Port) in Ulsan. This study utilized market value evaluation method to measure the benefits and costs related to the development of ports. The benefit variables are income effects resulting from the developments while the cost variables are sum of construction costs and maintenance costs. The income effects are measured in two ways: (1) income from individual project resulting from the developments, (2) the income effects by utilizing investment multipliers. The results shows that the BC ratio (Benefits/Costs) of Jeongja port by using (1) income from individual project resulting from the developments was 1.07 while the BC ratio by using (2) the income effects by utilizing investment multipliers was 1.10 due to a relative short period of useful life for investment multipliers. However, the income variable utilizing investment multipliers is more sensitive to the period of duration than the income variable from individual project.