• Textile Coloration and Finishing
• /
• v.32 no.2
• /
• pp.111-120
• /
• 2020

In this study, lignin/chlorinated poly(vinyl chloride)(CPVC) blended fibers have been produced for the development of low-cost carbon fiber. Carbon fiber manufacturing was accomplished through stabilization and carbonization process. The lignin/CPVC blended fibers were prepared by wet spinning method. Dimethylacetamid e(DMAc) and cychlohexanone in a ratio of 5:1(wt%) was employed as co-solvent. The ratio of lignin/CPVC was prepared at 0/10, 1/9, 2/8, 3/7, 4/6, and 5/5(wt%). The spinning solution was extruded at a rate of 0.1 to 0.4ml/min according to the blending ratio. The speed of the rollers was the same for all ratios(draw ratio=1). Analysis of fiber cross-section by scanning eletron microscopy(SEM) showed that as the lignin ratio increased in the same coagulation bath and distilled water, the pore size of the spinning fiber decreased. Therefore, the highest tensile strength of the blending fibers was 6.3±1.2MPa at the 5/5 ratio. The carbon fiber also showed the best tensile strength of 120.78±2.43MPa at 5/5 ratio.

• Korean Journal of Occupational Health Nursing
• /
• v.4
• /
• pp.5-29
• /
• 1995

Occupational health services in Korea have been operated as dual types : one is operated by occupational health care manager and the other is health care agency without their own personnel. The performance of occupational health service should be different due to the variety of characteristics of health care manager and workplace, qualification of health care manager. This study is to analyze performance of occupational health care services with a particular consideration of job performance shape and efficiency, based on comparing those two types of health care management to show on the basic data for the settlement of more qualitative health care management system at workplace. For this study, total 391 places in Seoul and Inchon city area ; 154 places (39.4%) managed by designated health care manager and 237 places (60.6%) by the agency with their commission are selected as research samples. Tools for data collection are questionnares that have been investigated during the period of 20 September 1993-20 December 1993. Those data are compared with percentiles, mean, standard deviation and B/C ratio using SPSS PC program. Conclusions observed from the tests and each comparison could be summerized as follows : 1. Occupational health care have been accomplished at workplaces with designated people than with agencies people, and coverage rate of the occupational health care services has differences, due to management types. The reason of these results is due to visit only one or two times monthly by the agencies, while their own health care manager obsess, at the workplaces all the times. 2. Most of the expense for environmental control of all health care services expenditures shows that there is almost no fundamental improvement because more expenses are needed for procuring personal protective equipment and measuring work environment instead of environmental improvement. 3. It is investigated how much the cost of occupational health care services needs per worker, and calculated how much the cost needs per service hour per worker. The results from this show that the cost of occupational health services at workplaces with their own managers used less than the cost of health care agencies, eventually the former gives better services with less cost than the latter. 4. Benefit/Cost ratio is also produced by total benefit/total cost. The result from the above way reads 4.57 as a whole, while their own manager having workplaces reads 4.82 and the agencies do l.56. Even if their own manager performing workplaces spent more cost, this system produces more benefit than the agencies management. 5. The B/C ratio for medical organization such as local clinic, health care center and pharmacy shows more than or equal to at the workplaces controlled by the agencies. It is inferred that benefit would be much less than the cost used, with so being inefficient. 6. It is assumed that the efficiency ratio of health education is equal to reduction rate of workers medical organization visit. Estimated reduction rate 5%, 10%, 15%, show that the efficiency ratio of health education have an effect on producing benefits. It is estimated that more benefit can be produced if more qualitative education will be provided for enhancing health care efficiency. 7. Results of this study cannot be generalized because there are large scale of deviation in case of workplaces with less than 300 full time workers, but B/C ratio reads 2.69 as a whole and 3.25 at workplaces with their own health care manager are higher than 1.63 at the workplaces manged by the agencies. Finally, all the benefit concerning health care services could not be quantified, measured and shown on the value of money. This is a reason that a considerable part of benefits are so underestimated. This is also thought that measurement tools should be developed for measuring benefits of health care services with a comprehensive quantification. in the future. It is also expected that efficiency of occupational health care services should be investigated using cost-effectiveness analysis.

• Journal of Nutrition and Health
• /
• v.27 no.8
• /
• pp.864-871
• /
• 1994

The productivity and 13 influencing variables in 14 conventional hospital foodservice systems the total direct and non-direct labor hours required to produce and serve the total number of patient meals plus the number of cafeteria meals. Human resource variable significantly influencing the productivity level was the labor cost. As this index decreased, the meals served per human hour worked increased. System resource variables correlating significantly with productivity were the length of cycle menu, the ratio of staff meals, and modified patient meal ratio. As the length of cycle menu and the ratio of modified patient meal decreased, more meals were produced per human hour. However, as staff meal ratio increased, the meals served per human hour worked increased. The stepwise regression analysis suggests that around 53% of the variance in productivity is explained by labor cost.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.333-336
• /
• 2012

In modern Construction Industry, as accumulation of capital and improvement of technology skills, buildings are becoming higher and more enormous, also the portion of steel works has been increasing. In addition, it is necessary to predict the optimum level of construction cost in a reasonable way. The composition of construction is direct construction cost, indirect construction cost and so on. However, it is not enough to study about indirect construction cost rather than direct construction cost. In this study, the state of productivity and indirect construction cost are analyzed in the steel production. As a result, the productivity and ratio of indirect cost in steel plant by inserted per 1ton are suggested.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.6
• /
• pp.39-46
• /
• 2020

Playing an important role in developing the economy and overall developments of the country, commercial banks have to be aware of their crucial presence in order to perform well and contribute significantly. At the same time, as a place to receive deposits, banks are required to be in safe situations to avoid bankruptcy or deal with financial crises. This research seeks to identify the determinants of Capital Adequacy Ratio and Banks' performance as well as the relationship between these two dependent variables. The paper uses 128 observations of 16 Vietnamese commercial banks during the period from 2010 to 2017, with two simultaneous dependent variables CAR and ROE, and independent variables including Return on Assets, Tobin Q, Credit growth, GDP growth, Equity to Deposits, Loans to Deposits, Bank size, Cost to Income, Liquidity risk, Provision for Loan loss ratio, Non-performing loans and Inflation. The results reveal that Capital Adequacy Ratio and Banks' Performance have statistically significant relationship and Credit growth, GDP growth, Equity-to-Deposit ratio and Cost-to-Income ratio all have significant effects on two dependent variables. The findings of this study suggest that commercial banks should control the respective elements in order to maintain adequate level of capital and also create effective performance.

• Culinary science and hospitality research
• /
• v.3
• /
• pp.165-179
• /
• 1997

Cost-volume-profit analysis shows the relationship between these factors. The figures expressed in a break-even chart can be used planning control and decision making. The relation ships can also be helpful in understanding how all costs must be covered in menu pricing. Involved in these relationship is the contribution to overhead and profit, or contribution ratio. This study used the food service operation of H hotel. Assumed the FC would be 10% of the High Volume, the VC would be 76% of the high volume. And in the CVP of individual meals, selected labor cost of the VC, assumed labor cost would be 35% of the volume.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.228-229
• /
• 2021

Planning/planning stage Construction cost prediction is very important. In particular, flexible thinking is required to predict the construction cost by reflecting rapid market changes and current conditions. Therefore, in this study, we tried to consider the process for calculating the construction cost of an apartment house in a more accurate planning/planning stage. First, cases were collected based on the classification system by construction type. Second, the construction cost was predicted using the case-based reasoning technique. Third, the composition ratio by construction type of the most similar case was applied to the derived construction cost. Finally, the construction cost was predicted based on practical corrections reflecting the market and field conditions.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.2
• /
• pp.609-614
• /
• 2016

Background: Although breast cancer is the most common cancer in women, economic evaluation of breast cancer screening is not fully addressed in developing countries. The main objective of the present study was to analyze the cost-effectiveness of breast cancer screening using mammography in 35-69 year old women in an Iranian setting. Materials and Methods: This was an economic evaluation study assessing the cost-effectiveness of a population-based screening program in 35-69 year old women residing in rural areas of South east Iran. The study was conducted from the perspective of policy-makers of insurance. The study population consisted of 35- to 69-year old women in rural areas of Kerman with a population of about 19,651 in 2013. The decision tree modeling and economic evaluation software were used for cost-effectiveness and sensitivity analyses of the interventions. Results: The total cost of the screening program was 7,067.69 US$ and the total effectiveness for screening and no-screening interventions was 0.06171 and 0.00864 disability adjusted life years averted, respectively. The average cost-effectiveness ratio DALY averted US$ for screening intervention was 7,7082.5 US$ per DALY averted and 589,027 US $ for no-screening intervention. The incremental cost-effectiveness ratio DALY averted was 6,264 US$ per DALY averted for screening intervention compared with no-screening intervention. Conclusions: Although the screening intervention is more cost-effective than the alternative (noscreening) strategy, it seems that including breast cancer screening program in health insurance package may not be recommended as long as the target group has a low participation rate.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.1761-1766
• /
• 2012

Background: The appropriate interval between negative colonoscopy screenings is uncertain, but the numbers of advanced neoplasms 10 years after a negative result are generally low. We aimed to evaluate the cost-effectiveness of colorectal neoplasm screening and management based on repeat screening colonoscopy every 10 years or single colonoscopy, compared with no screening in the general population. Methods and materials: A state-transition Markov model simulated 100,000 individuals aged 50-80 years accepting repeat screening colonoscopy every 10 years or single colonoscopy, offered to every subject. Colorectal adenomas found during colonoscopy were removed by polypectomy, and the subjects were followed with surveillance every three years. For subjects with a normal result, colonoscopy was resumed within ten years in the repeat screening strategy. In single screening strategy, screening process was terminated. Direct costs such as screening tests, cancer treatment and costs of complications were included. Indirect costs were excluded from the model. The incremental cost-effectiveness ratio was used to evaluate the cost-effectiveness of the different screening strategies. Results: Assuming a first-time compliance rate of 90%, repeat screening colonoscopy and single colonoscopy can reduce the incidence of colorectal cancer by 65.8% and 67.2% respectively. The incremental cost-effectiveness ratio for single colonoscopy (49 Renminbi Yuan [RMB]) was much lower than that for repeat screening colonoscopy (474 RMB). Single colonoscopy was a more cost-effective strategy, which was not sensitive to the compliance rate of colonoscopy and the cost of advanced colorectal cancer. Conclusion: Single colonoscopy is suggested to be the more cost-effective strategy for screening and management of colorectal neoplasms and may be recommended in China clinical practice.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.3
• /
• pp.291-300
• /
• 2013

The main purpose of this study is to analyse economic feasibility of low-carbon-oriented gear for anchovy boat seine. The results of benefit/cost analysis showed that use of the low-carbon fishing gear is economically feasible. Considering the fuel saving and relatively low $CO_2$ emission by reducing the resistance of gear, net present value by such type 1 gear improvement was estimated about -2,490 ~ -1,580 million won with the benefit-cost ratio 0.81~ 0.88. And net present value by such type 2 gear improvement was estimated about 6,540 ~ 7,780 million won with the benefit-cost ratio 1.79 ~ 1.94. Development of lowcarbon trawl gear would render significant contributions to reducing $CO_2$ emission in fishing operations and lead to reduce fishing costs due to fuel savings.