• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.6
• /
• pp.2317-2322
• /
• 2015

Background: Despite the increasing number of screening examinations performed for cervical cancer utilizing the Papanicolaou smear test (Pap test), few studies have examined whether this strategy is cost-effective in Korea. Objective: This study was conducted to evaluate the cost-effectiveness of cervical cancer screening strategies incorporating the Pap test based on age at the start and end of screening as well as screening interval. Materials and Methods: We designed four alternative screening strategies based on patient age when screening was started (20 or 30 years) and discontinued (lifetime, 79 years). Each strategy was assessed at screening intervals of 1, 2, 3, or 5 years. A Markov model was developed to determine the cost-effectiveness of the 16 possible cervical cancer screening strategies, and this was evaluated from a societal perspective. The main outcome measures were average lifetime cost, incremental quality-adjusted life-years (QALYs), and incremental cost-effectiveness ratio (ICER). Results: Compared with various strategies comprising younger starting age, discontinuation age, and longer screening intervals, strategies employing annual screening for cervical cancer starting at a target age of 30 years and above were the most cost-effective, with an ICER of 21,012.98 dollars per QALY gained (with a Korean threshold of 30,000,000 KRW or US$27,272). Conclusions: We found that annual screening for cervical cancer beginning at a target age of 30 years and above is most cost-effective screening strategy. Considering the potential economic advantages, more intense screening policies for cervical cancer might be favorable among countries with high rates of cervical cancer and relatively low screening costs.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.158-163
• /
• 2008

Although prior researches have been investigated the impact of insured cost(direct cost) on employers and employees, little work has attempted to categorize the items of unsecured cost(indirect cost) by accidents. On this basis, the goal of this study was to achieve a better understanding of the nature of accident cost of unsecured cost. Specifically, this study aimed to categorize the unsecured cost items according to the domestic industry circumstances and use these results for a basis of other accident cost related studies. The results of this study are as follows: (1) accident development steps were categorized as twelve items for improved management according to each step of accident development (2) the points of occurrence and termination of the unsecured cost were identified for the improved management according to each step of accident development and (3) characteristics of each item in unsecured cost were studied and identified for a better control of accident costs. These results provide a basis for further researches on the unsecured cost.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.159-162
• /
• 2003

This paper presents a novel heuristic mechanism, Dynamic-network Adapted Cost selection (DAC-selection), which has higher backup path sharing rate, lower number of blocked channel requests and number of used wavelengths fer reservation of working path and backup path by using unique cost function than that of widely used random selection (R-selection) mechanism and Combined Min-cost selection (CMC-selection) mechanism proposed by Lo, while maintaining 100% restoration capability.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.1
• /
• pp.82-88
• /
• 2007

This paper considers a topological optimization of a computer network design with a cost constraint. The objective is to find the topological layout of links, at maximal reliability, under the constraint that the network cost is less or equal than a given level of budget. This problem is known to be NP-hard. To efficiently solve the problem, a genetic approach is proposed. Two illustrative examples are used to explain and test the proposed approach. Experimental results show evidence that the proposed approach performs more efficiently for finding a good solution or near optimal solution in comparison with a simulated annealing method.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.3
• /
• pp.322-328
• /
• 2007

Highly standardized products are suitable for automated purchasing using electronic commerce technology, where the price becomes the most important factor. Suppliers can change the prices dynamically based on the inventory level and market situation in order to maximize the sales and profit. In the virtual marketplace where multiple customers purchase multiple standardized products from multiple suppliers repetitively, customers can purchase the required amount of each item as a dynamic bidding by allocating purchase orders to the suppliers based on the current price. Customers need a method to quickly determine the optimal allocation of orders to the suppliers using the dynamically changing data to minimize the total cost. We present a LP model which minimizes the sum of the total price plus transportation cost for this problem. Simulation results using random data show meaningful reduction of the total cost.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.575-586
• /
• 2005

This paper presents an approach to quantifying the costs and benefits of integrating ERP systems with project management systems, including potential time and cost savings. To properly identify the costs and the benefits, the paper shows the relevant construction information flows and the desired milestones in the integration process. The proposed benefit analysis model should allow construction firms considering the integration of their ERP systems with legacy systems or commercial project management software make informed decisions in regard to the existing alternatives in the early stages of decision making.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.2
• /
• pp.124-132
• /
• 2015

When Building Information Modeling (BIM) was introduced at the early stage, it was only utilized as a three-dimensional visualization tool. Nowadays, however, BIM is being studied for increasing design productivity and managing enormous information on building life cycle. One of the representative research is developing 'common prototype BIM libraries'. BIM data made of common prototype libraries should be utilized in various ways, quantity takeoff, code checking, energy analysis and so on. However, common prototype BIM libraries are not enough to estimate accurate cost. For example, composite wall libraries should be divided into several single objects, wall structure and finishes, for the quantity takeoff and construction cost calculation. In this paper, we are suggesting an automated division algorithm of composite wall and developing a system prototype for it. This study is expected to reduce extra modeling work and contribute to fast and accurate cost calculation in the construction.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.686-695
• /
• 1993

A flywheel-type, inclined axis chopper for small-area rice and livestock farmers, has been developed at IRRI Agricultural Engineering, The prototype is belt-driven by a 2.6kW engine and uses four angled blades rotating below a fixed counteredge. Manual feeding is facilitated by a convenient spout presenting the crop to the inclined blade housing and also suction created by the rotating blades . The distance between the rotating blades and the bottom of the housing determines the length of chops, set here for 25 cm. The unit would cost $200 without the engine. Tests with napier grass, corn stalks , and rice straw showed satisfactory performance within the acceptable clearance, speed and moisture content ranges of the material presented. Highest capacities were 1186, 1148 and 744kg/hr for napier grass, corn stalks and rice straw, respectively. Corn stalks required the highest power demand at 2.3kW engine would be adequate as power source. The chopper performance was comparable to higher cost commercial chippers in terms of capacity and specific energy.

• Wind and Structures
• /
• v.21 no.6
• /
• pp.597-607
• /
• 2015

With an increasing demand of a renewable energy, new offshore wind turbine farms are being planned in some parts of the world. Foundation installation asks a significant cost of the total budget of offshore wind turbine (OWT) projects. Hence, a cost reduction from foundation parts is a key element when a cost-efficient designing of OWT budget. Mono-piles have been largely used, accounting about 78% of existing OWT foundations, because they are considered as a most economical alternative with a relatively shallow-water, less than 30 m of seawater depth. OWT design standards such as IEC, GL, DNV, API, and Eurocode are being developed in a form of reliability based limit state design method. In this paper, reliability analysis using the response surface method (RSM) and numerical simulation technique for an OWT mono-pile foundation were performed to investigate the sensitivities of mono-pile design parameters, and to find practical implications of RSM reliability analysis.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.6
• /
• pp.275-282
• /
• 2015

The cost for maintenance (replacement cost) of Ni-superalloy components in plant industry is very expensive because of high unit price of INCONEL 718. A development of repairing technology using kinetic spray process can be very helpful for reducing the maintenance cost. However, it is very difficult to produce well-deposited INCONEL 718 layer showing high interfacial bond strength via kinetic spraying. Thus, INCONEL 718 was deposited on SCM 440 substrate and the interfacial properties were investigated, in order to elucidate the cause of hindrance to the bonding between INCONEL 718 layer and SCM 440 substrate. As a result, it was revealed that the dominant obstacle to the interfacial bonding was excessive compressive residual stress accumulated in the coating layer, resulting from low plastic-deformation susceptibility of INCONEL 718. Nevertheless, the bonding state was enhanced by the post heat-treatment through relieving the residual stress and generating a diffusion/metallurgical bonding between the INCONEL 718 deposit and SCM 440 substrate.