• 유기물자원화
• /
• 제26권4호
• /
• pp.11-19
• /
• 2018

본 연구는 배 전정지를 사용하여 제조온도와 가열시간별로 바이오차를 제조하여 최적의 바이오차 제조조건을 확립하고 바이오차 시용이 작물 생육과 토양이화학성에 미치는 영향을 구명하기 위하여 수행하였다. 제조온도($300^{\circ}C$, $500^{\circ}C$, $700^{\circ}C$), 가열시간(2, 3, 4 시간)별로 전기로에서 바이오차를 제조하여 성분변화를 조사하였다. 바이오차 제조온도가 높을수록 pH, 칼륨, 마그네슘, 양이온교환용량(CEC)은 증가하였고 이러한 성분변화는 $500^{\circ}C$에서 급격히 일어났다. 하지만 제조온도가 증가할수록 회분함량이 증가하고 전탄소(T-C) 함량과 수율은 감소하여 제한요인으로 작용하였다. 또한 가열시간에 따른 성분변화는 크게 나타나지 않아 가열시간보다는 제조온도에 따라 바이오차의 성분변화가 큰 것으로 나타났다. 따라서 바이오차 성분변화 및 회분, 수율을 고려하여 배 전정지 바이오차 제조조건은 $500^{\circ}C$, 2시간으로 설정하는 것이 바람직할 것으로 생각되었다. 농가 자가제조용 바이오차의 제조조건을확립하기 위해 드럼형 제조장치를 사용하여 배 전정지 바이오차를 대량으로 제조하였을 때에서도 전기로를 사용하여 제조한 바이오차와 주요 성분이 대등함을 확인할 수 있었으며, 이를 사용하여 배추와 토마토를 재배하면서 바이오차의 시용효과를 조사한 결과 무시용 대비 토양의 pH, 유기물(OM), 전탄소(T-C) 함량이 증가하고 EC, NO3-N가 감소하였다. 또한 바이오차 시용시 토양의 용적밀도가 낮아지고 공극률 및 입단율은 높아지는 경향을 보여 토양 물리성이 개선되는 효과가 나타났다. 바이오차를 연용한 결과 바이오차 시용으로 배추 생육 미 및 수량이 증가하였으며, 토마토는 바이오차 연용으로 상품과의 갯수 및 수량이 증가하였다. 드럼형 제조장치를 사용하여 농업부산물 바이오차를 농가에서 자가제조하여 사용할 경우 생산비 절감과 동시에 시설재배지 토양 이화학성 개선에 효과가 있어 친환경 농가의 토양관리에 활용도가 클 것으로 생각된다.

• 중소기업연구
• /
• 제31권4호
• /
• pp.67-93
• /
• 2009

본 연구는 1999년 1월 1일부터 2007년 12월 31일까지 한국거래소의 유가증권시장과 코스닥시장에 상장된 혁신형 중소기업을 대상으로 재무적 제약과 배당스무딩간의 관계를 실증분석 하였으며, 주요한 분석결과는 다음과 같다. 기업들은 목표 배당성향을 가지고 있으며, 실제 배당성향이 목표 배당성향에서 이탈하면 다시 배당지급을 부분적으로 조정한다. 배당조정속도는 Lintner(1956)의 배당조정모형의 핵심변수인 전기 주당배당과 당기 주당이익을 사용하여 거의 대부분 측정할 수 있으며, 잔여배당이론과 그 이후에 등장한 배당신호이론, 대리인이론, 케이터링 이론 및 거래비용이론에 관한 대용변수들은 배당조정속도에 부분적으로 영향을 미친다. 그리고 전기 주당배당은 당기 주당이익보다 배당조정속도에 더 큰 영향을 미치는데, 이는 기업들이 특별한 이유가 없는 한 전기 주당배당 수준을 장기적으로 유지하는 안정적인 배당정책을 선호한다는 증거가 된다. 혁신형 중소기업은 비혁신형 중소기업보다 배당조정속도가 더 빠르다. 혁신형 중소기업은 R&D 투자에 따른 미래의 성장성과 수익성을 담보로 하여 장기적으로 안정적인 배당정책을 유지할 수 있다. 다시 말해, 혁신형 중소기업은 배당지급이 목표 배당성향에서 이탈하더라도, R&D 투자에 따른 미래의 성장성과 수익성을 담보로 하여 목표 배당성향을 향하여 배당지급을 신속하게 조정하여 배당스무딩을 효과적으로 달성할 수 있다. 그리고 혁신형 중소기업 중에서도 재무적 비제약 기업은 재무적 제약 기업보다 배당조정속도가 더 빠르다. 이는 재무적 비제약 기업일수록 자본시장을 통한 외부 자금조달이 용이하기 때문에 주당배당을 신속하게 조정한다는 증거가 된다. 따라서 자본시장 접근성이 용이하여 재무적 제약을 적게 받는 기업일수록 외부 자금조달이 용이하기 때문에 배당지급을 더 신속하게 조정함으로써 배당스무딩을 더 효과적으로 달성할 수 있다. 그리고 중소기업청이 정책적 목적으로 분류한 혁신형 중소기업(벤처기업, 이노비즈기업, 경영혁신형기업)은 비혁신형 중소기업보다 배당조정속도가 더 빠르다. 중소기업청에서 정책적 목적으로 분류한 혁신형 중소기업은 신용보증지원, 정책자금지원, 조세혜택, 공공입찰 우선권 부여 등과 같은 다양한 정책적 혜택으로 인해 재무적 제약을 적게 받기 때문에 배당지급을 더 신속하게 조정할 수 있다. 결론적으로, 한국거래소의 유가증권시장과 코스닥시장에 상장된 혁신형 중소기업은 비혁신형 중소기업보다 배당조정속도가 더 빠르고, 혁신형 중소기업 중에서도 재무적 비제약 기업은 재무적 제약 기업보다 배당조정 속도가 더 빠르다. 다시 말해, 중소기업 중에서도 R&D 집중도가 높은 혁신형 중소기업은 R&D 투자에 따른 미래의 성장성과 수익성을 담보로 하여 배당스무딩을 신속하게 할 수 있고, 혁신형 중소기업 중에서도 자본시장 접근성이 좋은 기업은 재무적 제약을 적게 받기 때문에 배당스무딩을 더 신속하게 할 수 있다. 따라서 중소기업 경영자는 R&D 집중도를 증가시키고 자본시장 접근성을 높여 재무적 제약을 회피함으로써 신속한 배당스무딩을 통해 장기적으로 안정적인 배당정책을 유지할 수 있다고 생각한다. 그리고 중소기업청이 정책적 목적으로 분류한 혁신형 중소기업(벤처기업, 이노비즈기업, 경영혁신형기업)의 경우에도 배당조정속도가 비혁신형 중소기업보다 더 빠르게 나왔다. 이러한 결과는 배당정책의 측면에서 중소기업청의 혁신형 중소기업 정책을 지지하는 실증적인 증거가 된다.

• Nuclear Medicine and Molecular Imaging
• /
• 제43권4호
• /
• pp.323-329
• /
• 2009

목적: 방사면역측정법 및 면역방사계수법은 매 실험마다 표준용액을 넣고 표준곡선에 대비하여 결과를 산출하는 batch assay가 일반화되어 있다. 비용과 시간에 대한 효율성을 증가 시키기 위해서는 선행 표준 곡선을 이용하여 검사를 진행하는 random assay의 적용이 요구된다. 방사면역측정법 및 면역방사계수법에서 자동분주기를 이용한 random assay적용 가능성을 평가 하기 위해 본 연구를 수행하였다. 대상 및 방법: Triiodothyronine (T3), free thyroxine (fT4), Prostate specific antigen (PSA), Carcinoembryonic antigen (CEA) 4가지 항목을 대상으로 하였으며 각 검사별 20명의 환자 검체를 이용하였다. 각 검사 항목별로 표준곡선을 얻기 위해 3시간 간격으로 4회 측정한 표준용액의 분당계수값(counter per minute, cpm)을 측정하였다. 이를 Friedman test를 이용하여 비교하여 검사시 마다 얻는 표준 곡선간의 차이를 평가하였다. 각 검사별 저, 중, 고농도의 대조 용액을 이용하여 5회 측정하고 이를 Friedman test를 이용하여 비교하여 측정 내 정밀도를 평가하였다. 각 검사별 저, 중, 고농도의 대조용액을 batch assay와 자동분주기를 이용한 random assay로 3시간 간격으로 각각 4회 측정하였다. 측정값을 바탕으로 평균, 표준 편차, 변이계수를 구하고 Wilcoxon test를 이용하여 비교하여 assay 방법에 따른 차이를 비교하였다. 두 assay간에 일치도(agreement)를 평가하기 위해 두 assay의 측정값 사이에 급내상관계수(Intraclass correlation coefficient, ICC)와 상관계수를 계산하였다. 결과: 모든 검사항목에서 표준 용액의 분당계수값은 측정 간에 통계적으로 유의한 차이가 없었다. T3, fT4, PSA, CEA 검사항목마다 측정한 저, 중, 고농도별 측정 내 변이계수는 T3(3.6%, 2.6%, 0.9%), fT4(4.5%, 1.1%. 1.3%), PSA(3.9%, 3.1%, 1.2%), CEA(5.0%, 4.8%, 7.6%)였다. 검사 항목별 측정방법에 따른 대조 용액을 이용한 표준 곡선의 측정 간 정밀도 평가에서 두 검사 방법간에 유의한 차이가 없었다. 각 검사항목별로 20명의 환자 검체에서 측정한 측정 간 변이계수(inter-assay precision)의 평균과 표준편차 값은 batch assay로 시행했을 때 각각 3.2$\pm$1.7%, 3.9$\pm$2.1%. 7.1$\pm$6.2%, 11.2$\pm$7.2%였고 random assay로 측정하였을 때는 2.7$\pm$1.7%, 4.8$\pm$3.1%, 3.6$\pm$4.8%, 7.4$\pm$6.2였다. Batch assay와 random assay는 서로 높은 일치도를 보였다. 측정한 급내상관계수(Intraclass correlation coefficient)는 T3, fT4, PSA, CEA 각각 0.9968, 0.9973. 0.9996, 0.9901였다. Batch assay로 측정한 값과 자등분주기를 이용한 random assay로 측정한 값 사이에 상관 계수(R$^2$)는 T3, fT4, PSA, CEA 각각 0.9924, 0.9974, 0.9994, 0.9989(p<0.005)로 모두 강한 상관관계를 보였다. 결론: T3, fT4, PSA, CEA 4가지 항목의 방사면역측정 법 (Radioimmunoassay)에서 기존의 batch assay와 자동분주기를 이용한 random assay간에 일치도와 상관성이 높았다. 결론적으로 자동분주기를 이용한 random assay를 방사면역측정법 및 면역방사계수법에 적절히 이용할 수 있을 것으로 생각된다.

• 한국가축번식학회지
• /
• 제24권1호
• /
• pp.1-18
• /
• 2000

New Zealand, Palmerston North 지역의 낙농가 80여 개 낙농가에 1998년 2월부터 1998년 7월까지 우편설문지에 의해 조사되었다. 주어진 질문항목은 1). General characteristics (10개 질의), 2). Milk yield and feed supplementary (7개질의), 3). Reproductive efficiencies (14개 질의), 4). Reproductive disorders (12개 질의) 4개 항목을 포함하는 합계 43개의 질문을 내포하고 있었다. 낙농가의 응답자 38농가 (47.5%)에서 회수된 질의문 4개 항목중 1). 2). 항목에 해당되는 낙농사업에 있어서 일반적인 낙농 사육현황, 보조사료 그리고 우유 생산 등을 집계 분석하여 장단점을 파악하고, 우리나라 낙농인 (특히 제주도)들에게 인식시켜 보다 낳은 경제적 이익을 주기 위한 목적으로 수행된 바 이 결과를 요약하면 다음과 같다. 1. 낙농사육경력은 38개 낙농가 중 기록된 농가가 21개 (45%)였는데, 이중 15년 미만경력이 3농가(7.9%), 15~19년 경력은 7농가 (18.4%), 20~25년의 경험 농가가 6개 농가 (15.8%)였고, 26년 이상 경력을 가진 농가수는 5농가 (13.2%)로 대체로 우리나라보다 경력기간의 길고 많은 경험을 갖고 있는 낙농부국이었다. 낙농가의 노동력 투입에 있어서 주인 자신이 직접 경영하고 있는 농가는 21농가 (55.3%)였으며, Sharemilker에 의존하여 운영하는 농가가 10농가 (26.3%), 그리고 가족노동력이 투입된 2농가 (3.5%), Manager 가 주로 주관하여 운영되는 3농가 (5.3%), 일하는 사람을 두고 있는 농가 18농가 (31.6%)였으며, Part time 인력을 쓰는 농가는 2농가 (3.5%)뿐이고 기타가 1농가 (1.8%)로 나타내고 있었다. 이러한 사항은 낙농농가 당 1.5 인에 해당됨으로 경제적 이익 향상을 위해서 임금투입이 아주 낮았다. 2. 사육기반인 방목지와 경작지를 분석하여 보면 사육규모별 (200, 300, 400두) 방목지는 각각 56, 90, 165.3ha로 평균 107.8ha이었고, 경작지도 각각 51, 78, 165ha로서 사육규모별 차이가 컸다(P＜0.01). 이와 같은 결과는 낮은 비용으로 우유를 생산하고 우유제품 95%를 세계 각국으로 수출할 수 있는 기반이 되고 있음을 입증 할 수 있었다. 낙농가의 전반적인 기록여부사항은 응답농가 (38 농가) 중 10농가 (26.3%)가 computer, 벽기록장을 이용하는 농가수가 15농가(39.5%), 그리고 낙농수첩을 사용하고 있는 낙농가는 36농가(95%)로 가장 높았으며, 두 가지로 기록하고 있는 농가 수는 23농가(70%)로 높은 편이었다. 3. 한편, 환경면에 있어서 분뇨 처리 시설 분야는 큰 도시를 제외한, 공해를 인식하지 못할 정도로 깨끗하여 아직은 철저하지 않아서 공해처리는 문제화되지 않고 있었다. 그러므로, Pond system 이 26농가(68.4%)로 제일 많았으며, 다음에 매일 분을 제거하여 쌓아 놓아서 저장해 놓고 유기질 비료로서 이용하는 농가가 8농가(21.1%), 1 농가(2.6%)에서 Bunker system으로 저장되었고 기타의 방법으로 저장하는 것이 3농가(7.9%)로 대부분 유기질 비료가 부족하여 화학 비료를 많이 사용하고 있는 형편이며 한국의 30~40여년 전 환경 상태와 유사하였다. 4. 우유 착유 시설 조사에서는 Harringbone 시설이 33농가(86.9%)였고, 다음으로 Walkthrough 구조가 3농가(7.9%), Rotary system 과 기타 구조식이 각각 1개 농가(2.6%)로 세계 낙농 선진국으로 인정 할 수 있으나, 축사시설은 거의 없고 착유시설만 설치되어 있어서 기후환경의 이점을 최대로 살려 경제성 향상을 시도하고 있었다. 5. 착유일수와 두당, 년간 비유량에 관해서 착유일수는 평균 275일, 건유기간 약 87일로 New Zeal-and 의 평균 착유일수 228일 보다 약 47일정도 긴 결과를 보여주고 있다. 착유두수 당 우유 총생산량을 보면 년간 평균 3,990kg 이었고, 우유 건물량 (ms)은 약 319kg였다. 그리고 매일 두당 우유건물량 (ms)은 평균 1.2kg, 우유량은 15.5kg(건물 12.5%로 환산), 우유지방은 평균 4.83%로 외국의 수치 보다 상당히 높았고, 우유 단백질은 평균 3.57% 이었다. 6. 결론으로 Palmerstone North 지역의 낙농업은 뉴질랜드의 중심지로 목장운영의 경험과 경력 약 20년으로, 우리나라의 6~9년 보다 길고, 전체 호당 평균 사육두수는 약 355두로서, 우리나라 최근 호당 35두에 비하여 차이가 심했다. 목장에는 사육우사는 거의 없고 단지 충실한 착유실만 있을 뿐으로 대부분의 목장은 가축 노동력인 부부 두 사람 (1.5 인)에 의해서 착유가 실시되고 있으며, 특이한 것은 철저히 봄에만 분만 (93%) 을 유도하는 계절번식을 시도하여 착유기간은 240~280일로 겨올동안은 착유를 하지 않고, 당해년 그 무리의 비유량과 body score에 의해서 건유기가 결정되어 휴식기로 들어감으로서 우리나라와는 다방면(경영형태포함)에서 많은 차이점이 있었다. 그리고 젖소에는 전혀 농후사료를 급여하지 않고 완전히 방목을 위주로 사육되기 때문이며 착유량은 약 3,500kg로 우리나라의 절반이지만 집유시 우유량 보다 유지율에 따라서 환금됨으로 유지율이 4,5%로 상당히 높은 수준으로 개량하여 왔으며, 세계에서 가장 낮은 가격의 우유를 생산하는 낙농부국으로서 우리나라도 노동력 절감과 대규모 사육을 위한 실질적인 면은 물론 경영면에 더욱 치중하여야 할 것이다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.