• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.227-232
• /
• 2008

In this research, organic extracts from roots of platycodon grandiflorum was tested to see the possibility for cosmetic natural surfactant. Interfacial properties of extracts of Platycodon grandiflorum was checked for interfacial tension, forming force, dispersion force, emulsion force, emulsion activity, and emulsion stability. At 0.005 wt% concentration, the interfacial tension against the caster oil was 11.5 dyn/cm which was lower than that of Tween 40 and quillaja bark. Extracts of Platycodon grandiflorum showed excellent emulsification activity and stability for cosmetic oils such as olive oil, soybean oil, and canola oil. In patch test using 2-5% of the extract and glycerin, the extract showed mild skin irritation. From the experiment, the extracts of platycodon grandiflorum root showed good interfacial properties as a cosmetic agent with minor skin irritation.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.369-369
• /
• 2003

Viscarin is a tradename given to viscosifying carrageenans manufactured by FMC BioPolymer. The suitability of Vis car ins as rheology agents in mild cleansing applications has been investigated. Rheological properties, foam volume and clarity were measured to determine the impact of including 1 % Viscarin on 10% solutions of the following surfactants: acylglutamate, cocoamidopropyl betaine, PEG-80 laurate, sodium lauryl sulphate and sodium lauryol sarcosinate. Viscosity, pseudoplasticity and thixotropy of Viscarin/surfactant solutions varied with surfactant type. In all cases, the addition of Viscarin substantially increased viscosity. For example, at a shear rate of 1 sol, all surfactant solutions had viscosities <0.1 Pa s while viscosities of Viscarin/surfactant solutions ranged from 10 to 60 Pa s. By comparison, a solution of 1 % Viscarin had a viscosity of 0.3 Pa s. Clarity of surfactant solutions decreased in all cases on the addition of Viscarin. However, it was found that by including a mild solubilizing surfactant, such as PEG 40 hydrogenated castor oil, crystal clarity could be maintained in Viscarin/surfactant solutions. Viscarin increased the foam volume of sodium lauryolsarcosinate solutions from 10 ml to 220 ml and had no impact on the foam volume of the other surfactants tested. These results were used to formulate a clear, ultra-mild foaming cleansing gel based on sodium lauryol sarcosinate and Viscarin without the need for a secondary, foam-boasting surfactant. A mild shampoo was also formulated. Both products have excellent skin-feel and are capable of suspending bubbles and solid inclusions.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.22 no.2
• /
• pp.167-173
• /
• 1996

The stability of gel structured emulsion and the effect of polyols on it have been studied by rheological property and interfacial tension. In this paper, three types of gel structured emulsions were prepared by using three polyols respectively(glycerine for sample 1, 1.3 BG for sample 2, PG for sample 3). And both complex modulus($G^*$) and loss angle[$\delta$ = tan-1(G"/G')] of samples were investigated against oscillating shear stress and frequency($\omega$). The results show sample 1 is most highly consistent with oscillating shear stress. And the results were compared with those of accelerated tests concerning storage stability of gel structured emulsion. To correlate consistency of rheological property with storage stability, interfacial tension from which adsorption efficiency of surfactant(Octyldodecyl Ether) could be known was measured. Sample 1 showed the largest value of [$d{\gamma}/dIn_{Cconc. of surfactant}$] in Gibbs equation. In summary, the prediction of stability could be correctly made by the consistency of rheological property(G*,$\gamma$) of gel structured emulsion against oscillating shear stress and it could be supported by measuring interfacial tension. And polyol affected the value of [$d{\gamma}/dIn_{Cconc. of surfactant}$], consequently affected the stability.lity.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.19 no.1
• /
• pp.127-138
• /
• 1993

This study was investigated optimal conditions which were necessary to prepare emulsion of four component systems by the Microfluidizer. Squalane, isopropyl myristate, PPG-15 stearyl benzoate ester were used as an oil and POE(20) sorbitan monolaurate, POE(20) sorbitan monopalmitate, POE(20) sorbitan monostearate, glycerine were selected as a cosurfactant and surfactant. The emulsion was affected by the operating pressure, the recycle frequency and oil, surfactant, cosurfactant phase. The operating pressure and recycle frequency increased, the droplet diameter of emulsion decreased and was constant later. In this study, the optimal pressure and recycle frequency were 1400 bar, 4 cycles. The droplet size was the smallest when the concentration of glycerine was 30 wt.%. As the oil phase is increased, the size is increased.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.449-454
• /
• 2011

This surfactant can be used as a cosmetics and chemical dispersants. The variation of critical micelle concentration(CMC) with temperature for N-eicosyl pyridinium bromide over the range $40^{\circ}C$ to $60^{\circ}C$ has been measured by drop methods. Thermodynamic quantities for micellization of N-eicosyl pyridinium bromide in water have been calculated by polynominal equation.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.258-267
• /
• 2003

Recently inside nano liposome particles or nano-emulsions which contain tough-melting physiology activity materials or the coefficient of low organism utilization promote the coefficient of organism utilization, so this part has been studied a lot because they can absorb selectly cosmetics, specially physiology activity materials, into the skin. Also, in particle size, cells interstitial lipid interval are 30~50nm, so nano-emulsions that the size is similar to 30~50 nm are made to study for absorbing quickly into the skin. And transparent skin which contains oils in common skin lotion dosage form has become the center of public interest. The used nano-emulsions in this study were unsaturated lecithin/co-surfactant! ethanol/ oil / water. And polysorbate 20/ polysorbate 80/ Dicetyl phosphate/hydrogenated .caster oil/ isoceteth-20/SLS were used in co-surfactant. The used oils were cyclomethicone and caprylic/capric triglyceride. The manufacturing process was that microfluidizer was fixed in 1000bar and transit times were changed from 1 to 10 times. From transparency and particle size, the transparency sequence was SLS> polysorbate 20= polysorbate 80> isoceteth-20> dicetyl phosphate >hydrogenated caster oil and the particle size was small. Specially cyclomethicone nano-emulsions, when we made unsaturated lecithin /SLS /ethanol/water/cyclomethicone, cyclomethicone 5％ was good for transparency. And 20％ of this was used for making transparent skin toner in common skin dosage form.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.15 no.1
• /
• pp.37-50
• /
• 1989

The in Vitro chemosensitivity of fibroblast cell strains was determined using a semiautomated tetrazolium-based colorimetric assay(MTT assay) to 16 cosmetic materials. This assay is useful method to evaluate toxic effects of the chemicals. From assay results, we determined that the preservatives are more toxic than moisteurizers. The chemicals in the same group have a different toxicity. That is, in preservatives, Germall -115 is more toxic than Danisol -M, -p, and in surfactant sodium laurel sulfate than Myrj 52, and in moisteurizers, 1, 3-butylene glycol is more safe than the others. When the results from this assay for preservatives were compared with patch test results, good correlation was observed. Forthemore, this assay method can be used together with Patch test for the evaluation of the chemical toxicity, particularly in cosmetic field.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.392-404
• /
• 2003

A new technology to achieve o/w microemulsions allows the formulation of transparent products with low surfactant content. The PIT Nanotechnology approach gives cosmetic/pharmaceutical o/w microemulsions in one step with a broad variety of surfactants, cosurfactants and oil phases.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.21 no.2
• /
• pp.22-48
• /
• 1995

This study was investigated to search for the effects of the structure of each component in four-component O/W microemulsion system on its formation region, droplet size and stablilty. The results was that the more number of OH site, the shorter carbon chain length of polyol, the larger formation region of microemulsion was showed. The small microemulsion droplet was obtained on condition that the polatry of oil was large and carbon chain length of hydrophobic group of surfactant was long. In using satrated hydrocarbon (such as liquid paraffin, squalane) as dispersed phase, the stability of microemulsion was better than aromatic oil phase.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.3
• /
• pp.240-247
• /
• 2009

The purpose of this study is to develop a method to evaluate solubility parameter interactions of cosmetic ingredients in formulations. This experimentation relates to the fabrication of new multi-layer cleansing oil which can remove make-up products such as lipstick, foundation, mascara, eye shadow, etc., and also can wash away dirt and sebum from the skin just in one stage process. Solubility parameter and specific gravity of various cosmetic ingredients are measured to explain the cleanliness of interface, detergency of make-up cosmetics on the skin surface. The results suggest that it is possible for cosmetic chemists to use solubility parameter of cosmetic materials for fabrication of new formulation of 3-layer cleansing oil.