• 설비공학논문집
• /
• 제22권11호
• /
• pp.751-759
• /
• 2010

A newly developed type PCHE(Printed Circuit Heat Exchanger), which has a longitudinal corrugation flow channel, was fabricated using etching and diffusion bonding to evaluate its hydraulic performance. The pressure drop characteristics obtained from the experimental results are presented and the local friction factors associated with different hydraulic diameters and inclination angles are discussed. The results of a three-dimensional numerical simulation are presented, conducted using commercial CFD(Computational Fluid Dynamics) software at lower Reynolds number range. The numerical results were validated by experimental data obtained from helium gas experimental apparatus. The results of CFD prediction show fairly good agreement with the experimental data.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.283-289
• /
• 2004

Rail defects(Corrugation, shelling, etc) are occurred by the Rail with wheel contact stress. Rail grinding is maintaining of optimal rail profile to use special rail grinding machine to remove rail defect. The benefits of rail grinding enforcement, improve track safety, improve track steering and rail life, improve ride comfort and reduce noise, etc. Actually when rail grinding plan apply to field track, we should consider a lot of function before determination, such as grinding method, grinding pass number, removing metal volume, etc. because each track has various characteristics. Therefore it is important that the determination of rail grinding strategy for optimum and economic before enforcement.

• 한국진공학회지
• /
• 제4권4호
• /
• pp.367-372
• /
• 1995

We investigate the Au(001) surface reconstruction, numerically, by Molecular Dynamics (MD) simulation. We find that the top-most layer of Au(001) surface is reconstructed to a contracted hexagonal face, and relaxed about 0.05$\AA$ upward at room temperature. The contraction ratio with respect to a unreconstructed Au(111) surface is about 3.5%. The hexagonal layer is slightly distorted and buckled. The surface corrugation is found to be about 0.28$\AA$ on average. In our earlier work we have predicted the in-plane orientation of the reconsturcted layer to be either $0^{\circ}$ or $0.7^{\circ}$ depending on the size of the cluster. However, we find only $0.0^{\circ}$ in this simulation because the size of the cluster correspoding to the $0.7^{\circ}$ orientation is larger than the current limitation of MD simulation. These findings are in good agreement with experimental results.

• 한국소음진동공학회논문집
• /
• 제20권7호
• /
• pp.672-676
• /
• 2010

In a railway vehicle, corrugated steel panel is widely used for the floor structure because of its high bending stiffness and light weight. However, this panel shows lower sound insulation performance than that of the flat plate with the same weight. Especially, in a particular frequency region, transmission loss(TL) rapidly decreases and it results in the deterioration of sound insulation performance of the overall floor structure. This study identifies that the severe decrease in TL is caused from the local resonance of the periodic corrugated structure. TL decrease by local resonance is investigated by experiment and finite element analysis. Finally, design modification of the corrugation is proposed to improve TL and the effect is verified by experiment.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.141-146
• /
• 2003

An experimental investigation was conducted to estimate the flexural behavior of circular concrete beams confined by carbon sheet tube under the loading and unloading cycles. Six specimens were produced with different layers of carbon sheets and with or without corrugations inside of tubes. The experimental results represented that the load and displacement capacity are increased in the specimens which have increased layers of tube and have installed corrugations inside of tubes. In order to obtain enough capacity, tubes have to keep tubes at proper layers but it can not affect positively more than certain layers to increase the layers of tube. Therefore, appropriate estimation of structural member is needed to obtain enough capacity and displacement by means of proper carbon sheet direction and layers of tube.

• Structural Engineering and Mechanics
• /
• 제46권4호
• /
• pp.519-531
• /
• 2013

To have a better understanding of the torsional mechanism and influencing factors of PC composite box-girder with corrugated steel webs, ultimate torsional strength of four specimens under pure torsion were analyzed with Model Test Method. Monotonic pure torsion acts on specimens by eccentric concentrated loading. The experimental results show that cracks form at an angle of $45^{\circ}$ to the member's longitudinal axis in the top and bottom concrete slabs. Longitudinal reinforcement located in the center of cross section contributes little to torsional capacity of the specimens. Torsional rigidity is proportional to shape parameter ${\eta}$ of corrugation and there is an increase in yielding torque and ultimate torque of specimens as the thickness of corrugated steel webs increases.

• International Journal of Railway
• /
• 제2권4호
• /
• pp.152-163
• /
• 2009

In this paper, the correlation between the accelerations measured at the track components and the parameters affecting the acceleration is analyzed. To do it, the accelerations of each track component such as rails, sleepers and ballast are measured in Kyong-Bu high-speed Line. The RMS values of the measured accelerations are calculated and the pad stiffness, the longitudinal irregularity, running velocity and the corrugation, are considered as the parameters affecting the acceleration. By using the linear regression, the correlation coefficients are calculated to analyze the relationship between the acceleration characteristics and the parameters. Also, the 1/3 Octave analysis is calculated to analyze the dominant frequency band of the accelerations of the track components.

• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.607-612
• /
• 2007

본 논문에서는 도시철도 차량의 운전모드에 의한 레일마모 현상을 역행, 타행, 제동 세구간 별로 나누어 레일 마모 현상을 비교 분석하였고, 또한 ATO 로깅데이터에서 실제 운행한 속도데이터를 가속도와 감속도 데이터로 변환하여 열차의 가속도의 견인력과 감속도의 제동력에 의해 발생되는 레일마모량을 비교 분석한 결과로 통해 궤도 관리에 적용할 수 있는 방안을 제시하고자 한다.

• Coupled systems mechanics
• /
• 제12권4호
• /
• pp.337-364
• /
• 2023

The Rayleigh wave propagation is considered in the structure of the functionally graded piezoelectric material (FGPM) layer over the elastic substrate. The elastic substrate loosely bonds the layer through a corrugated interface, whereas its upper boundary is also corrugated but stress-free. Additionally, the solutions for the FGPM layer and substrate are derived using the fundamental variable separable approach to convert the partial differential equation to an ordinary differential equation. The results with boundary conditions lead to dispersion relations for the electrically open and electrically short cases in the determinant form. The outcomes have been numerically analyzed using a specific model. The findings were presented in the form of graphs, which were created using Mathematica 7. Graphs are plotted for variations in wavenumber and phase velocity. The outcomes may help measure interface defects and design Surface Acoustic Wave (SAW) devices.

• 한국강구조학회 논문집
• /
• 제24권6호
• /
• pp.671-682
• /
• 2012

박스형 거더나 박공형 철골조 프레임에서 주름웨브보의 사용은 최근 많이 늘어가고 있다. 그 이유는 얇은 주름웨브보를 사용함으로서 압연형강이나 용접을 이용한 조립보에 비해 중량을 크게 줄일 수 있으며, 박판의 좌굴은 주름이 막아줄 수 있기 때문이다. 자동생산기술의 향상으로 인해 주름웨브를 가진 단위 부재를 양산할 수 있게 되어 적용분야가 확장되고 있으며, 주름웨브보의 부재 제원을 고려한 최적설계의 구현이 필요하게 된다. 이를 위해 본 논문에서는 주름웨브보의 생산부재 데이터를 고려한 이산화 최적구조설계 프로그램을 개발하여 집중하중과 등분포하중을 받는 주름웨브 단순보에 대해 적용하였다. 최소중량을 목적함수로, 세장비, 응력 및 처짐을 제약조건으로 채택하고, 전역최소값을 탐색하기 위해서 유전자 알고리즘을 채택하였으며, 생산부재의 번호를 불연속설계변수로 이용하였다. 최종적으로 해석설계의 검증을 위해서 이산화 최적설계 결과를 연속일 때의 결과와 비교하였으며, 최적단면 특성에 대해 분석하였다.