• 한국항행학회논문지
• /
• 제28권2호
• /
• pp.246-249
• /
• 2024

In this paper, we present a miniaturized differential line (DL) using inductance-enhanced corrugated ground planes (LCGP) for effective common-mode (CM) noise suppression in high-speed packages and printed circuit boards. The LCGP-DL demonstrates the CM noise suppression in the frequency range from 2.09 GHz to 3.6 GHz. Furthermore, to achieve the same low cutoff frequency, the LCGP-DL accomplishes a remarkable 23.2% reduction in size compared to a reference DL.

• 한국물환경학회지
• /
• 제20권2호
• /
• pp.163-169
• /
• 2004

Feasibility of using PE sheet laminated CSP(Corrugated steel pipe) to sewers were tested via corrosion and abrasion tests for PE sheet laminated CSP; 1) corrosion test for PE film and PE coated plate, 2) corrosion test for joint of PE sheet laminated CSP, 3) corrosion test for outside of PE sheet laminated CSP, and 4) abrasion test for inside of PE sheet laminated CSP. The results for the corrosion and abrasion tests are as follows. 1. Results for corrosion tests on PE films and zinc coated steel plates that were coated with PE films show that the surfaces of both PE were not changed compared to those of original PE samples. Furthermore, PE films maintained strong adhesion on the steel plates even though they were exposed to sewage and seawater provided cutting planes of the steel plates were treated with molding. But, results for corrosion tests on the spots that were previously cut off by a knife and a cutting planes of the steel plates were treated without molding show that steel plates have been corroded if they were exposed to sewage and seawater. 2. Results for corrosion tests on joints of PE sheet laminated corrugated steel using sewage show that gathering rust was observed at cutting plane of PE sheet laminated corrugated steel after 180 days, but PE film was not flaked off. However, PE film at cutting plane was flaked off when PE sheet laminated corrugated steel was exposed to seawater. Furthermore, flaking process was severely progressed at lockseam points of which the surfaces were not smooth. 3. Results for laying PE sheet laminated corrugated steel under the ground show that the surface of untouched PE film was almost identical to that of original PE film. However, the spots that were previously cut off by a knife and a cutting plane of PE sheet laminated corrugated steel have flaked off. 4. As a result of abrasion tests conducted with PE sheet laminated corrugated steel and sand, brilliance and thickness of PE was not greatly changed under the severe abrasion conditions. Therefore, the durability of PE sheet laminated corrugated steel for abrasion was determined to be good.

• 한국전자파학회논문지
• /
• 제27권1호
• /
• pp.14-19
• /
• 2016

본 논문에서는 물결모양 구조를 갖는 광대역 슬롯 안테나를 제안하였다. 제안된 안테나는 물결모양 슬롯 구조를 가지는 접지면과 마이크로스트립 급전선으로 이루어져 있다. $70{\times}70{\times}1.6mm$의 한정된 크기에서 제안된 안테나는 물결모양 슬롯 구조를 통해 전류의 경로를 길게 하여 보다 동작주파수를 낮추었으며, 광대역의 대역폭을 갖는다. 안테나의 측정된 10 dB 반사손실 대역폭은 2,180 MHz(2.5~4.68 GHz)이며, 중심주파수 3.59 GHz에서 비대역폭 60.7 %를 가진다. 제안된 안테나는 전방향성 방사 패턴을 가지며, 측정된 이득과 평균효율은 3.48~5.83 dBi, 81.55 %의 값을 갖는다.

• 한국전자파학회논문지
• /
• 제10권3호
• /
• pp.359-367
• /
• 1999

평행평판 도파관으로부터 급전되어지는 주름진 도체판을 가지는 표면파 안테나의 해석이 고려되어진다. 해석의 단순함을 위해 원래의 문제를 3개의 영역, 즉 단락된 평행평판 도파관 내부 구조(내부 영역 1)와 주름진 격자 내부의 구조(내부 영역 2)와 도체 쇄기의 구조(외부 영역)로 나누기 위해 등가원리가 도입된다. End-fire 복사를 하는 주름진 표면과 안테나를 해석하기 위하여 하이브리드 MOM/UTD 방법이 적용되어진다. 수치해석 결과들은 이전의 실험결과들과 매우 잘 일치하며, 이전의 단순 등가전류 접근의 결과들과 비교할 때 더 나은 결과들이 얻어진다. 또한 효과적인 end-fire 주름진 표면파 안테나 설계를 위한 인자들을 얻을 수 있다.

• 한국통신학회논문지
• /
• 제31권9A호
• /
• pp.906-912
• /
• 2006

본 논문에서는 $5.15{\sim}5.35GHz$ 대역의 무선 LAN용 N-슬롯 마이크로스트립 안테나를 설계 제작하였다. 사각형 패치에 사이즈 감소를 위해 N-슬롯 미앤더 주름구조를 갖도록 하였으며, 접지면과 기판사이에 공기층을 삽입하여 VSWR<2.0에서 적절한 대역을 얻고자 하였다. 설계시 주요 파라미터는 N-슬롯의 길이, 폭, 위치와 공기층의 두께 및 급전위치였으며 최적화된 파라미터를 가지고 실제 제작 및 측정하였다. 제작된 안테나의 측정결과는 다음과 같다. 공진 주파수는 5.25GHz이고, VSWR<2.0에서 약 300MHz의 대역폭과 $1.3{\sim}2.64dBi$의 이득을 얻었다. H-평명과 E-평면에서 각각 $80.21^{\circ}$와 $103.38^{\circ}$로 나타났다.

• Journal of electromagnetic engineering and science
• /
• 제13권3호
• /
• pp.178-185
• /
• 2013

This paper introduces a high-efficiency, high-gain, broadband quasi-Yagi antenna, and its four-element array for use in 60-GHz wireless communications. The antenna was fed by a microstrip-to-slotline transition consisting of a curved microstripline and a circular slot to allow broadband characteristics. A corrugated ground plane was employed as a reflector to improve the gains in the low-frequency region of the operation bandwidth, and consequently, to reduce variation. The single antenna yielded an impedance bandwidth of 49 to 69 GHz for $|S_{11}|$ <-10dB and a gain of >12.0 dBi while the array exhibited a bandwidth of 52 to 68 GHz and a gain greater than 15.0 dBi. Both proposed designs had small gain variations (${\pm}0.5$ dBi) and high radiation efficiency (>95%) in the 60-GHz bands. The features of the proposed antenna were validated by designing, fabricating, and testing a scaled-up configuration of the single antenna at the 15-GHz band. The measurements resulted in an impedance bandwidth of 13.0 to 17.5 GHz for $|S_{11}|$ <-10dB, a gain of 10.1 to 13.2 dBi, and radiation efficiency in excess of 88% within this bandwidth. Additionally, the 15-GHz antenna yielded quite symmetric radiation profiles in both E- and H-planes, with a high front-to-back ratio.