• 한국안전학회지
• /
• 제8권1호
• /
• pp.54-58
• /
• 1993

The fatigue growth behavior of short cracks were studied various load ratios. Computer-aided unloading elastic compliance method was employed to measure the closure and the length of short cracks. In the dc/dN-$\Delta$K relationships. the decreasing behavior of the growth rate of short cracks is due to the decrease of crack opening ratio with increasing crack length. Irrespective of load ratio. the growth rate of short cracks can be well decribed in terms of the effective stress intensity factor range $\Delta$K$_{eff}$, which is calculated on the base of crack closure. dc/dN-$\Delta$K$_{eff}$ relationships of short cracks are found to coincide well with the corresponding long crack relationships. accordingly. the growth rate of short cracks can be predicted using that of long cracks.ort cracks can be predicted using that of long cracks.cks.

• 한국농공학회지
• /
• 제20권4호
• /
• pp.4799-4804
• /
• 1978

In order to investigate the effect of delayed compaction on the strength of the lime soil mixtures, labroatory test with two kind of soils was performed at four levels of lime content, at five levels of water content, and at six love's of delayed times. The results are summarized as follows; 1. Maximum dry density and optimum moisture content decreased with increase of the delayed times. The decreasing rate of those values at the earlier delayed time were large, and those values showed almost constant after about four hours of delayed time. 2. According to the increase of the delayed time, the decreasing rate of maximum dry density and optimum moisture content was large ia S-2 sampl, but was a little in S-1 sample. 3. Unconfined compressive strength of lime soil mixtures decreased with the increase of the delayed time, and the decreasing rate of its strength increased with the increase of the lime content. 4. Water content corresponding to the maximum strength was a little higher than the optimum moisture content along the increase of lime content and delayed time but its value was large in fine soil.

• Journal of information and communication convergence engineering
• /
• 제3권1호
• /
• pp.56-61
• /
• 2005

In this paper, we present a video rate control scheme for storage and delivery in which the time-varying viewing interests are controlled by human gaze. To track the gaze, the pupil's movement is detected using the three-step process : detecting face region, eye region, and pupil point. To control bit rates, the quantization parameter (QP) is changed by considering the static parameters, the video object priority derived from the pupil tracking, the target PSNR, and the weighted distortion value of the coder. As results, we achieved human interfaced visual model and corresponding region-of-interest rate control system.

• Bulletin of the Korean Chemical Society
• /
• 제16권3호
• /
• pp.252-256
• /
• 1995

Semiempirical MO calculations using the PM3 method are performed on the reactions of acetate esters with substituted phenolate anions. The mechanistic change from rate-limiting formation to breakdown of the anionic intermediate is shown to occur in the gas-phase, especially for meta-nitrophenyl acetate. However the mechanistic change-over takes place at a lower basicity ($pK_0$) of the anion nucleophile than found for the corresponding formate. This lowering of $pK_0$ has been ascribed to the electron donating effect of the methyl group in the acetate. For the reactions involving rate-limiting breakdown of the intermediate, the large Bronsted coefficients, ${\beta}_X({\beta}_{nuc})$, are expected in general, but the magnitude increases to a larger value and the pK0 is lowered accordingly, when an electron-donating nonleaving group, like $CH_3$, is present. This type of nonleaving group effect provides a necessary condition for the carbonyl addition-elimination mechanism with rate-limiting breakdown of the intermediate.

• 한국통신학회논문지
• /
• 제33권11A호
• /
• pp.1072-1078
• /
• 2008

이 논문에서는 전송 실효성 극대화를 위하여 사용자 별 최소 및 최대 전송률 제한을 두는 페이딩 방송채널에서 내림차순 전력할당에 기반한 효율적인 SCM (superposition coding multiplexing) 방법을 제안한다. 이 방법은 3단계로 구성되는데, 1단계에서는 전송 가능한 최대의 사용자 집합을 선정하고, 2단계에서는 사용자 별 송신전력의 내림차순으로 해당 사용자의 최소 전송률을 보장하는 최대 허용 간섭전력을 결정하는 방식으로 해당 사용자별 송신전력을 할당하고 잔여전력을 계산한다. 3단계에서는 2단계에서 잔여전력이 발생하는 경우에 수행하며, 내림차순 마지막 사용자부터 다시 오름차순으로 해당 사용자의 최대 전송률 제공에 필요한 전력 범위까지 최대로 추가 전력을 할당한다. 이 방법은 2단계 내림차순 할당에서 각 사용자가 자신의 최소 전송률 보장을 위하여 이후 사용자들로부터의 최대 허용 간섭전력을 고려하여 전력할당이 이루어졌으며 오름차순 추가 할당으로 인한 해당 사용자 이후 모든 순위 사용자들에 대한 전력 재할당을 필요로 하지 않는다. 따라서, 제안한 방법은 사용자 별 최소뿐만 아니라 최대 전송률 제한을 두는 경우, 특히 사용자 수가 많아질수록 계산이 더욱 효율적이다.

• 한국전자거래학회지
• /
• 제23권1호
• /
• pp.47-63
• /
• 2018

무형자산의 가치평가에 많이 사용되고 있는 수익접근법과 시장접근법의 특성을 모두 가지고 있는 로열티공제법을 사용하여 지식재산권의 경제적 가치를 평가할 때, 로열티공제법의 중요한 투입변수인 로열티율을 객관적으로 산정하는 수리적 모형을 제시한다. 이를 위하여 미국의 특허침해 손해배상액을 로열티율로 산정한 판례를 참고로 하여 로열티율을 종속변수로, 당해 특허권의 특허지표를 독립변수로 하여 로열티율 산정 회귀모형을 적용한다. 또한 미국의 당사자계재심(Inter-Partes Review)판례를 참고로 하여 특허무효거절 결과를 종속변수로 하고 당해 특허권의 특허지표를 독립변수로 하여 로지스틱회귀 모형을 적합시킨다. 최종 로열티율은 위의 로열티율 산정 회귀모형에서 산출된 로열티율과 로지스틱회귀모형에서 산출된 특허무효거절 확률을 결합하여 산정한다. 마지막으로, 본 논문에서 구축된 모형에 의해 산정된 로열티율과 기준 방식에 의해 산정된 로열티율을 비교하여 제안된 모형의 객관성과 신뢰성을 분석한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권4호
• /
• pp.767-783
• /
• 2013

This paper aims at designing a selective demodulation scheme based on Log-likelihood Ratio threshold (SDLT) instead of the conventional adaptive demodulation (ADM) scheme, by using rateless codes. The major difference is that the Log-likelihood ratio (LLR) threshold is identified as a key factor to control the demodulation rate, while the ADM uses decision region set (DRS) to adjust the bit rate. In the 16-QAM SDLT scheme, we deduce the decision regions over an additive white Gaussian channel, corresponding to the variation of LLR threshold and channel states. We also derived the equations to calculate demodulation rate and bit error rate (BER), which could be proven by simulation results. We present an adaptation strategy for SDLT, and compare it with ADM and adaptive modulation (AM). The simulation results show that our scheme not only significantly outperforms the ADM in terms of BER, but also achieves a performance as good as the AM scheme. Moreover, the proposed scheme can support much more rate patterns over a wide range of channel states.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권16호
• /
• pp.6973-6976
• /
• 2014

This study was conducted to evaluate the one-year survival rate of patients with primary malignant central nervous system (CNS) tumors after surgical treatment in Kazakhstan. Retrospective data of patients undergoing operations in the Department of Central Nervous System Pathology in the JSC National Centre for Neurosurgery in the period from 2009 to 2011 were used as the research material. Kaplan-Meier survival analysis was performed with the following information: gender, date of birth, place of residence, diagnosis according to ICD-10, the date of the operation, the morphological type of tumor, clinical stage, state at the end of the first year of observation, and the date of death. The study was approved by the ethical committee of the JSC National Centre for Neurosurgery. The overall one-year overall survival rate (n=152) was 56.5% (95% confidence interval (CI): 50.2-62.7), and 79.5% (95% CI 72.2-86.8) and 33.1% (95% CI: 21.0-42.3) for Grades I-II (n=76) and Grades III-IV (n=76), respectively. Significant prognostic factors which affected the survival rate were age and higher tumor grade (Grades III-IV), corresponding with results described elsewhere in the world.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.128-140
• /
• 1997

A new super compact condenser(SCC), which has been developed recently is especially suitable for an alternative refrigerant HFC-134a due to its high performance and compactness. The SCC is composed of two pipe headers, baffles, narrow multi-rectangular channels, and louvered fin arrays. Alternating inlet and outlet by the inserted baffles in pipe headers guide refrigerant to and from the narrow multi-rectangular channels. Since the flow rate and its lengh are changed depending on the number and location of baffles, the corresponding pressure drop and heat transfer rate are changed. The present study aims to theoretically and experimentally investigate the effects of baffle location and its number on the pressure drop and thermal performance of the SCC with 40 multi-rectangular channels. The results show that the present method provides an acceptable prediction of pressure drop and heat transfer rate for a 4 pass SCC. However, the model significantly under predicts the performance of a 3 pass SCC, which may be attributed to the phase separation of refrigerant flowing through header pipes. Pressure drop is more signifi- cantly influenced than heat transfer rate by the baffle location.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.456-465
• /
• 1988

The performance of the cold latent heat storage is investigated by experiment and by a simplified analytic approach. The heat storage tank has eight horizontal circular tubes and one path of refrigerant evaporating tube. The phase change material in the heat storage tank is water which is frozen by evaporating refrigerant of refrigeration system and melts by the warm air in the heat storage tank. In the experiment, the performance has been studied by the various conditions including the initial water temperature on solidification and flow rate and temperature of air. The rate of recovered heat has been simulated by a simplified model and the results shows a good agreement. In solidification process, initial water temperature causes time delay corresponding to the sensible heat and it is found that the shape of evaporator is important. In melting process, the recovered heat rate from the heat storage tank is proportional to $Re^{0.8}(T_{bi}-T_f)$ of air where $T_{bi}$ and $T_f$ indicate temperatures of inlet air and phase change, respectively. And the deminishing rate of the recovered heat is higher for the higher heat rate.