• 산업경영시스템학회지
• /
• 제25권4호
• /
• pp.1-7
• /
• 2002

Statistical process control is used widely as an effective tool to solve the quality problems in practice fields. All the control charts used in statistical process control are parametric methods, suppose that the process distributes normal and observations are independent. But these assumptions, practically, are often violated if the test of normality of the observations is rejected and/or the serial correlation is existed within observed data. Thus, in this study, to screening process, the Combined Shewhart - CUSUM quality control chart is described and evaluated that used bootstrap method. In this scheme the CUSUM chart will quickly detect small shifts form the goal while the addition of Shewhart limits increases the speed of detecting large shifts. Therefor, the CSC control chart is detected both small and large shifts in process, and the simulation results for its performance are exhibited. The bootstrap CSC control chart proposed in this paper is superior to the standard method for both normal and skewed distribution, and brings in terms of ARL to the same result.

• 품질경영학회지
• /
• 제26권2호
• /
• pp.51-60
• /
• 1998

Exponetially weighted moving average(EWMA) control chart to simultaneously monitor correlation coefficients of several correlated quality variables under multivariate normal process are proposed. Performances of the proposed control charts are measured in terms of average run length(ARL) by simulation. Numerical results show that smaller values of smoothing constant are more efficient in terms of ARL.

• 품질경영학회지
• /
• 제29권1호
• /
• pp.1-10
• /
• 2001

We consider the problem of detecting special variations in multivariate $T^2$-control chart when two or more multivariate outliers are present. Since a multivariate outlier may reflect slippage in mean, variance, or correlation, it can distort the sample mean vector and sample covariance matrix. Damaged sample mean vector and sample covariance matrix have difficulty in examining special variations clearly, An alternative to detection outliers or special variations is to use robust estimators of mean vector and covariance matrix that are less sensitive to extreme observations than are the standard estimators $\bar{x}$ and $\textbf{S}$. We applied popular minimum volume ellipsoid(MVE) and minimum covariance determinant(MCD) method to estimate mean vector and covariance matrix and compared its results with standard $T^2$-control chart using simulated multivariate data with outliers. We found that the modified $T^2$-control chart based on the above robust methods were more effective in detecting special variations clearly than the standard $T^2$-control chart.

• Journal of the Korean Data and Information Science Society
• /
• 제23권5호
• /
• pp.1037-1044
• /
• 2012

Multivariate control charts for effectively monitoring every component in the dispersion matrix of multivariate normal process are considered. Through the numerical results, we noticed that the multivariate control charts based on sample statistic $V_i$ by Hotelling or $W_i$ by Alt do not work effectively when the correlation coefficient components in dispersion matrix are increased. We propose a combined procedure monitoring every component of dispersion matrix, which operates simultaneously both control charts, a chart controlling variance components and a chart controlling correlation coefficients. Our numerical results show that the proposed combined procedure is efficient for detecting changes in both variances and correlation coefficients of dispersion matrix.

• 산업경영시스템학회지
• /
• 제33권3호
• /
• pp.22-29
• /
• 2010

Six sigma has been the most influential management innovation tool in order to achieve the customer's satisfaction and keep the competition in the age of limitless competition. The success in six sigma is to find the correct CTQ (Critical to Quality). QFD (Quality function deployment) is the efficient too ever created to tie product and service design decisions directly to customer wants and needs. One of the mistakes in QFD is to analyze using an inconsistent HOQ (House of quality) chart. An inconsistent HOQ chart is one in which the information from the correlation matrix is inconsistent with that from the relationship matrix. This study presents the consistency check and inconsistency check in case of failing the consistency check. Also we propose the procedures using the Limiting Probability in correlation matrix and the Median Rank in relationship matrix in order to be consistent in HOQ chart.

• 설비공학논문집
• /
• 제10권6호
• /
• pp.666-673
• /
• 1998

Solubilities (LiBr+$CaC1_2$) in water were measured at temperatures form 267.51 to 306.17K for $CaC1_2$ (LiBr+$CaC1_2$)=0.24 by mole. Experimental data were correlated with polynomial equations. Average absolute deviations between the measured and calculated values were 0.31% at concentration smaller than 60wt% and 0.41% at concentration larger than 60wt%, respectively. Vapor pressures were measured at temperatures from 296.75 to 436.75K and concentrations from 40 to 70wt%. Vapor pressure data were fitted to a Antoine-type equation and average absolute deviation was 2.98%. The P-T-X chart and H-T-X chart of $H_2O$/(LiBr+$CaC1_2$) system were constructed by using the correlation equations of solubility, vaper pressure, and heat capacity. The P-T-X chart indicates that $H_2O$/(LiBr+$CaC1_2$) system has potential as a possible working fluid for air-cooled absorption chillers.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.347-354
• /
• 1999

Statistical Process Control(SPC) which uses control charts is widely used to inspect and improve manufacturing process as a effective method. A parametric method is the most common in statistical process control. Shewhart chart was made under the assumption that measurements are independent and normal distribution. In practice, this assumption is often excluded, for example, in case of (equation omitted) chart, when the subgroup sample is small or correlation, it happens that measured data have bias or rejection of the normality test. A bootstrap method can be used in such a situation, which is calculated by resampling procedure without pre-distribution assumption. In this study, applying bootstrap percentile method to (equation omitted) chart, it is compared and evaluated standard process control limit with bootstrap percentile control limit. Also, under the normal and non-normal distributions, where parameter is 0.5, using computer simulation, it is compared standard parametric with bootstrap method which is used to decide process control limits in process quality.

• 자원환경지질
• /
• 제43권4호
• /
• pp.381-391
• /
• 2010

최근 다양하게 제시되고 있는 확률론적 방법에 의한 산사태 예측기법의 경우 전문적 지식을 기반으로 조사 및 분석이 이루어질 경우에만 분석결과의 신뢰성을 확보할 수 있다. 그러나 재해 발생상황에서는 통계분석을 통한 산사태 예측의 전문가뿐만 아니라 공무원, 지질공학자 등 통계적 전문지식을 갖지 않은 재해분야 담당자도 신뢰성 있고 간편한 방법으로 산사태 취약성을 해석할 수 있어야 한다. 따라서 본 논문은 전문가는 물론 비전문가도 쉽게 의미를 이해하고 활용할 수 있으면서도 정확한 분석을 통한 통계적 접근으로 신뢰성 높은 산사태 취약성 평가표를 개발하여 제안하고자 하였다. 이를 위해 기존에 국내에서 산사태가 집중적으로 발생한 지역의 지질, 지형, 토질자료를 토대로 산사태 정준상관분석을 통한 수량화 기법을 이용하여 산사태 취약성 평가표를 개발하였다. 산사태의 현장자료와 실내시험자료를 바탕으로 통계분석을 실시하고, 그 결과를 토대로 영향인자 선정 및 인자별 급간 값을 설정한 것이다. 수량화 분석결과 산사태를 발생시키는 여러 인자 중 사면경사가 가장 큰 중요도를 가지며, 고도, 투수계수, 간극율, 암질, 건조밀도의 순서로 큰 영향을 미치는 것으로 나타났다. 각 평가항목별로 결정된 점수를 기준으로 평가항목 각각의 세부등급에 대한 점수를 할당하여 산사태재해 취약성 평가표를 개발하였다. 산사태재해 취약성 평가표를 이용하여 평가자는 평가대상 지점에 대해 각 평가항목별 해당 속성, 즉 세부등급을 선택하고, 선택된 각 속성별 평가점수를 더하면 산사태 취약성을 점수로 신속하게 파악할 수 있다. 또한, 이 결과를 토대로 GIS 기법을 이용한 산사태 예측지도 또는 취약성지도 등을 작성하여 활용할 수 있다.

• 디지털콘텐츠학회 논문지
• /
• 제19권6호
• /
• pp.1105-1114
• /
• 2018

최근 국내 음원 시장의 성장 속도가 두드러짐에 따라 음원 흥행 예측의 필요성이 커졌다. 본 논문에서는 인터넷 기사, SNS 등 소셜 데이터와 멜론 주간차트 진입 순위의 상관관계를 분석하여 음원 흥행의 예측 지표를 제안한다. 남자 가수와 여자 가수 각각에 대하여 총 10가지 항목의 소셜 데이터를 수집하였고, 군집 분석을 실시하였다. 이를 통해 남자 가수와 여자 가수 각각의 유의미한 음원 흥행 예측 지표를 발견하였다.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.365-370
• /
• 2002

In this study, according to MARMA(1,0) model which was suggested by Seppala, in case of existing autocorrelation in X control chart and EWMA control chart, the standard method and the non-parametric bootstrap method were compared and analysed using the bootstrap method which use the resampling prediction residual.