• 대한예방의학회:학술대회논문집
• /
• 대한예방의학회 1994년도 교수 연수회(환경)
• /
• pp.561-575
• /
• 1994

Williams, M K., King, E., and Walford, Joan (1969). Brit. J. industr. Med., 26, 202-216. An investigation of lead absorption in an electric accumulator factory with the use of personal samplers. Thirty-nine lead workers and controls, in stable conditions of exposure, each wore personal lead-in-air samplers daily for two weeks. During the second week samples for blood lead, urinary lead, urinary coproporphyrin, urinary $\gamma$-aminolevulinic acid (ALA), the punctate basophil count, and haemoglobin were taken daily. Duplicate estimations were made on one day. The lead exposures of men doing almost identical jobs differed by ratios of up to four to one. This could be attributed on y to personal differences in working habits. The correlation coefficients and regression equations of the biochemical tests with lead-in-air and with each other were determined. The mean values and $95\%$ confidence limits of single determinations of some of the biochemical tests corresponding to the two commonly accepted TLVs of lead-in-air (0-20 and 0-15 mg./$m^{3}$) were calculated from the regression equations. For each biochemical test the variation due to analytical error, the variation from day to day within subjects and the residual variation about the regression on lead-in-air were calculated. Previous estimates of the latter are not known. Excessive confidence may be placed in an index of exposure due to its low coefficient of variation within subjects unless the coefficient of variation between subjects about regression is taken into account. The correction for specific gravity of estimations of lead and ALA in spot samples of urine was found to reduce slightly the residual variation between subjects about the regression on lead-in-air and to increase the correlations with lead-in-air and with the other biochemical tests, but these changes were not statistically significant. The modified method used for estimating blood lead and urinary lead is described and validated.

• 한국대기환경학회지
• /
• 제23권4호
• /
• pp.449-456
• /
• 2007

Dispersion coefficient preprocessing schemes have been examined to improve plume dispersion model performance in complex coastal areas. The performances of various schemes for constructing the sigma correction order were evaluated through estimations of statistical measures, such as bias, gross error, R, FB, NMSE, within FAC2, MG, VG, IOA, UAPC and MRE. This was undertaken for the results of dispersion modeling, which applied each scheme. Environmental factors such as sampling time, surface roughness, plume rising, plume height and terrain rolling were considered in this study. Gaussian plume dispersion model was used to calculate 1 hr $SO_2$ concentration 4 km downwind from a power plant in Boryeung coastal area. Here, measured data for January to December of 2002 were obtained so that modelling results could be compared. To compare the performances between various schemes, integrated scores of statistical measures were obtained by giving weights for each measure and then summing each score. This was done because each statistical measure has its own function and criteria; as a result, no measure can be taken as a sole index indicative of the performance level for each modeling scheme. The best preprocessing scheme was discerned using the step-wise method. The most significant factor influencing the magnitude of real dispersion coefficients appeared to be sampling time. A second significant factor appeared to be surface roughness, with the rolling terrain being the least significant for elevated sources in a gently rolling terrain. The best sequence of correcting the sigma from P-G scheme was found to be the combination of (1) sampling time, (2) surface roughness, (3) plume rising, (4) plume height, and (5) terrain rolling.

• 수산해양기술연구
• /
• 제53권4호
• /
• pp.376-385
• /
• 2017

This study was conducted to understand the relationships between fish and zooplankton of distribution in the coastal waters of the East Sea from May to August 2016 using hydroacoustic. To distinguish between fish and zooplankton, we used the time varied threshold (TVT) method at the frequency of 120 kHz. As a result, the mean nautical area scattering coefficient (NASC) of fish was highest at $913m^2/n.mile^2$ in June and lowest at $315m^2/n.mile^2$ in July. The mean NASC of zooplankton was highest at $247m^2/n.mile^2$ in May and lowest at $70m^2/n.mile^2$ in July. The mean NASC of fish and zooplankton showed a significant difference (P < 0.05) with high correlation ($R^2=0.84$). In addition, there was no significant difference in the mean NASC of fishes and zooplankton by depth (t-test, person correction = -0.17, p > 0.05).

• 한국측량학회지
• /
• 제38권4호
• /
• pp.327-343
• /
• 2020

본 연구는 효율적인 재난 피해 분석을 위해 재난 후 KOMPSAT (Korea Multi-Purpose Satellite)-3/3A Level 1R 영상의 기하품질을 향상하는 방법을 제안한다. 제안 기법은 재난상황에 대한 데이터 수급의 한계를 해결하고자, 영상 수급이 원활한 Planetscope 정사영상과 KOMPSAT-3/3A 영상에 격자기반 SIFT (Scale Invariant Feature Transform) 기법을 적용하여 RPC (Rational Polynomial Coefficient) 보정에 필요한 GCP (Ground Control Point, 지상기준점)를 취득한다. 제안 기법을 검증하기 위해 2019년 4월 강릉 산불 피해 지역의 KOMPSAT-3 영상과 토지피복의 다양성을 고려하여 추가된 대전지역 KOMPSAT-3A 영상에 제안 기법을 적용하였다. 생성된 KOMPSAT-3/3A 정사영상의 기하품질을 검증한 결과, KOMPSAT-3 다중분광 영상의 위치오차 (RMSE: Root Mean Square Error)가 6.62화소에서 1.25화소로, KOMPSAT-3A의 경우 7.03화소에서 1.66화소로 감소되어 영상의 기하품질이 향상됨을 확인하였다. 기하품질이 향상된 KOMPSAT-3 정사영상은 산불 발생 전 Planetscope 정사영상과 비교되었으며, 이를 통해 향상된 기하품질이 산불 피해 지역 분석에 적합하다고 판단하였다. 본 연구는 GCP 취득의 대안으로 Planetscope 정사영상의 사용 가능성을 보여주었으며, 제안 기법은 재난 상황뿐만 아니라 Planetscope 영상의 수급이 가능한 다양한 KOMPSAT-3/3A 활용연구에 적용될 수 있을 것으로 예상된다.

• Preventive Nutrition and Food Science
• /
• 제14권4호
• /
• pp.310-315
• /
• 2009

The partitioning behavior of the five printing ink solvents in nine lab-made cookies with various sugar and water content at 25${^{\circ}C}$ was studied to find out the presence and effects of interaction between the two ingredients on partitioning behavior in cookies. Solvents were ethyl acetate, hexane, isopropanol, methyl ethyl ketone and hexane. It was observed that the partition coefficient (the solvent concentration in food compared to that in air, Kp) decreased as sugar increased in all case and increased as water content increased for all compounds except toluene. Statistical analysis by the F-test method was used to determine the significance of sugar-water interactions, as well as other single factors on partitioning behavior of each solvent. Sugar content alone had no significant effects, but the crystallinity of sugar, as changed by water content, affected the partitioning behavior of the five solvents significantly. Parameter estimation for each significant factor by SAS program yielded a regression equation, which was used to predict the partitioning behavior in the finished cookie. Kp values from the regression equation could be determined more precisely by applying a correction term for the interaction between sugar and water to the Kp values of each ingredient after baking.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 유체기계 연구개발 발표회 논문집
• /
• pp.42-48
• /
• 1998

Numerical study is presented for the analysis of three-dimensional incompressible turbulent flows in multiblade centrifugal fan. Reynolds-averaged Navier-Stokes equations with standard k - $\epsilon$ turbulence model are transformed to non-orthogonal curvilinear coordinates, and are discretized with finite volume approximations. Linear Upwind Differencing Scheme(LUDS) is used to approximate the convection terms in the governing equations. SIMPLEC algorithm is used as a velocity-pressure correction procedure. The computational area is divided into three blocks; core, impeller and scroll, which are linked by multi-block method. The flow inside of the fan is regarded as steady flow, and mathematical formula established from the cascade theory and empirical coefficient are employed to simulate tile flow through the impeller. From comparisons between the computational results and the experimental data, the validity of the mathematical formula for the blade forces was examined and good results were obtained qualitatively. Hence, we can get the flow characteristics of multi-blade centrifugal fan and it will be a corner stone of the development of the multiblade centrifugal fan.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2004년도 춘계학술발표회
• /
• pp.49-52
• /
• 2004

RADARSAT은 선박탐지를 포함하는 해상감시에 있어서 중요한 역할을 할 수 있는 데이터중의 하나이며, 이것은 레이더센서를 가지고 있어 전천후 및 주야불문이라는 두 가지 주요 이점을 가지고 있기 때문에 가능하다. 그러나, 합성개구레이더의 이미징시에 대기의 영향은 무시될 수 없으며, 다양한 형태로 기하 변형이 발생하게 된다. 본 연구에서는, 레벨 1의 georeferenced SGX 데이터를 사용해서 RADARSAT의 합성개구레이더에 대한 기하/대기 보정을 시험하였다. 대기보정을 위한 레이더 산란파 크기 등의 정보는 데이터 헤더자료로부터 추출하였으며, DN을 beat nought와 sigma nought로 변환을 실시하였다. 마지막으로 자동 기하보정결과를 실재 좌표 값과 비교하였다.

• 한국유체기계학회 논문집
• /
• 제13권3호
• /
• pp.43-48
• /
• 2010

In this study rotordynamic characteristics of an air turbo-compressor (ATC) used in oxygen plant are analyzed and its operating-speed balancing is performed to solve the vibration trouble caused by rotor unbalance. Three dimensional model of the ATC rotor is completed and then analytical FE (finite element) model, which is verified by experimental modal testing, is developed. A rotordynamic analysis includes the critical map, Campbell diagram, and unbalance response, especially considering the pedestal housings supporting tilting pad bearings. A test run of operating-speed, using tilting-pad bearing of actual use, showed that the vibration level increased very sharply as approaching the rated speed. The operating-speed balancing specified by API 684 was carried out by using influence coefficient method. The results showed that the vibrations at the bearing pedestal housings represented good levels of 0.1 mm/s. From the test run and operating-speed balancing, the analytical results, that is, critical speeds are in good agreement with the test results and unbalance responses introducing the correction masses are similar to the as-is test responses in its aspect.

• Steel and Composite Structures
• /
• 제24권5호
• /
• pp.603-613
• /
• 2017

In this research, the free vibration response of laminated composite plates is investigated using a novel and simple higher order shear deformation plate theory. The model considers a non-linear distribution of the transverse shear strains, and verifies the zero traction boundary conditions on the surfaces of the plate without introducing shear correction coefficient. The developed kinematic uses undetermined integral terms with only four unknowns. Equations of motion are obtained from the Hamilton's principle and the Navier method is used to determine the closed-form solutions of antisymmetric cross-ply and angle-ply laminates. Numerical examples studied using the present formulation is compared with three-dimensional elasticity solutions and those calculated using the first-order and the other higher-order theories. It can be concluded that the present model is not only accurate but also efficient and simple in studying the free vibration response of laminated composite plates.

• 대한전자공학회논문지SP
• /
• 제45권4호
• /
• pp.71-77
• /
• 2008

이 논문은 산업용 방사선영상을 비선형왜곡의 영향으로부터 복구하는 방법을 제시한다. 비선형 형태의 모델을 구현하기 위해 역자승법칙과 비어의 법칙에 근거한 해석적 방법을 고안한다. 방사선 선원과의 위치설정에 따른 다양성에 기인한 기하학적 영향이 디지털화된 영상에 반영된다. 각도, 위치, 흡수상수, 길이, 너비 및 화소수 산출 등과 같은 파라미터 값으로 표현하는 모델관련 특성을 샘플영상과 일치하도록 모델 내에 수식적으로 규정하였다. 모델과 최근접한 영상으로의 복구를 위한 탄젠트 기울기 기반 보정기법을 고안하였다. 이 방식을 강판튜브 방사선영상에 적용하여 영상을 복구한 결과가 제시되고 논의된다.