• 한국지진공학회논문집
• /
• 제12권5호
• /
• pp.39-45
• /
• 2008

2006년과 2007년에 한반도 및 주변지역에서 발생한 85개 지진($1.6\;{\leq}\;M_L\;{\leq}\;4.9$)의 지진원 상수에 대하여 반복 스펙트럼 역산법을 적용하여 분석하였다. 지진자료는 한반도 남부지역의 광대역관측소3성분 기록으로부터 추출한 487개의 S-파군으로 구성되어 있다. 지진파 스펙트럼 분석을 통하여 각 지진에 대한 모멘트규모를 결정하고, 이를 진원거리에 따른 모서리 주파수의 변화에 대비하였다. 모서리 주파수는 진원거리가 증가함에 따라서 감소하는 경향이 있고, 이러한 경향은 모멘트규모가 커질수록 줄어든다. 변위 스펙트럼에서 측정한 모서리 주파수를 겉보기 모서리 주파수로 정의하였다. 이러한 겉보기 모서리 주파수의 거리 종속성은 세계적으로 동부 캐나다 순상지와 발트 순상지에서 보고된 바 있으나, 아직까지 그 원인은 명확하지 않다.

• 산업기술연구
• /
• 제22권A호
• /
• pp.185-192
• /
• 2002

The performance of old and the new concrete construction depends upon bond strength between old and the new concrete. Current adhesive and strength measurement method ignores the effect of stress concentration from shape of specimens. Therefore, this research calculates stress concentration coefficient as the ratio of drilling depth to drilling diameter($h_s/D$), the ratio of overlay thickness to drilling diameter($h_0/D$), the ratio of steel disk thickness to drilling diameter(t/D), the ratio of overlay elastic modulus to substrate modulus($E_1/E_0$), the distance from core to corner border(L_$_{corner}$) and the distance between cores(L_$_{coic}$) vary. The finite element method is adapted to analysis The results from 'the F.E.M analysis are as follows. The stress concentration effects can be minimized when the ratio of drilling depth to drilling diameter($h_s/D$) is 0.20~0.25, the elastic modulus ratio($E_1/E_0$) is 06~1.0, and the ratio of steel disk thickness to drilling diameter(t/D) is 3.0. The overlay thickness, the distance from specimens to corner border(L_$_{corner}$), the distance between cores(L_$_{coic}$) almost do not affect to the stress concentration.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1165-1172
• /
• 2009

두 개의 평판이 직각으로 만나는 corner에서 형성되는 층류 경계층을 입자영상유속계 기법을 이용하여 측정하였다. 자유류 유속은 2.96 ~ 3.0 m/s, 층류 경계층이 형성 될 수 있도록 모델에 대한 유동의 입사각을 1.2도로 하여 작은 순 압력구배를 제공하였다. 모델의 앞전은 둥근 형상으로 처리하였으며 모델의 길이는 약 1000mm이다. 측정 결과는 이등분면에서 corner 경계층의 전형적인 특징인 변곡점을 가지는 박리형 속도 분포를 보여주었다. 이등분면에서 멀어져 감에 따라 속도 분포는 평판의 Blasius 분포로 변해가고, 이등분면 경계층 두께의 약 절반만큼 평판을 따라 멀어지면 변화가 완료된다. 앞전에서부터 하류로 감에 따라 이등분면에서의 경계층 성장 및 속도 분포의 유사 상사성을 측정 결과로부터 확인하였다.

• 대한전자공학회논문지
• /
• 제27권1호
• /
• pp.96-104
• /
• 1990

In this paper, a novel method of jig-saw puzzle matching is proposed using a modifided boundary matching algorithm without a priori knowledge for the matched puzzle. Specifically, a boundary tracking algorithm is utilised to segment each puzzle from low-resolution image data. Segmented puzzle is described via corner point, angle and distance between two adjacent coner point, and convexity and/or concavity of corner point. Proposed algorithm is implemented and tested in IBM PC and PC version vision system, and applied successfully to real jig-saw puzzles.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.127-131
• /
• 2002

This paper presents the a measured path-loss characteristics in urban line-of-sight(LOS) and non line-of-sight(NLOS) environments for 3.4, 5.3, and 6.4 ㎓ band signals. A two-ray model is applied to analyse the path-loss characteristics in LOS areas. In LOS areas, an empirical break point, whose distance is shorter than a theorical break point, is founded. Further, a sudden power level drop occurs at a transition point from LOS region to NLOS area and different path-loss exponents are occured various cases. The power level drop due to comer loss and path-loss exponents both increase as the distance between the transmitter and the corner increases.

• Clinics in Shoulder and Elbow
• /
• 제21권3호
• /
• pp.113-119
• /
• 2018

Background: This study was undertaken to evaluate the positional relationship between planes of the glenoid component (the scapular plane and the perpendicular plane to the glenoid) and its surrounding structures. Methods: Computed tomography (CT) images of both shoulders of 100 patients were evaluated using the 3-dimensional CT reconstruction program ($Aquarius^{(R)}$; TeraRecon). We determined the most lateral scapular bony structure of the scapular plane and measured the shortest distance between the anterolateral corner of the acromion and the scapular plane. The distance between the scapular plane and the midpoint of the line connecting the posterolateral corner of acromion and the anterior tip of the coracoid process (fulcrum axis) was also evaluated. The perpendicular plane was then adjusted to the glenoid and the same values were re-assessed. Results: The acromion was the most lateral scapular structure of scapular plane and perpendicular plane to the glenoid. The average distance from the anterolateral corner of the acromion to the scapular plane was $10.44{\pm}5.11mm$, and to the plane perpendicular to the glenoid was $9.55{\pm}5.13mm$. The midpoint of fulcrum axis was positioned towards the acromion and was measured at $3.90{\pm}3.21mm$ from the scapular plane and at $3.84{\pm}3.17mm$ from the perpendicular plane to the glenoid. Conclusions: Our data indicates that the relationship between the perpendicular plane to the glenoid plane and its surrounding structures is reliable and can be used as guidelines during glenoid component insertion (level of evidence: Level IV, case series, treatment study).

• 정보처리학회논문지B
• /
• 제9B권5호
• /
• pp.681-688
• /
• 2002

본 논문에서는 컬러 정보인 컬러비와 형태학적 정보인 코너점 및 거리비를 이용한 교통표지판 영역추출 시스템을 제안한다. R G, B 성분들의 컬러비를 기반으로 생성한 이진영상에 대해서 불림 연산처리와 마스크를 이용한 코너점 및 중심점 검출에 의해 후보영역을 추출한다. 다양한 형태의 교통표지판 영역은 후보영역의 중심점을 기준으로 형태학적 정보인 거리비를 이용하여 추출한다. 실험결과, 제안한 시스템은 크기 및 위치에 불변하며, 삼각형, 원, 역삼각형, 사각형 등의 다양한 교통표지판과 밝기값의 차이가 큰 낮과 밤 영상에 대해서도 정확한 영역추출이 가능하였다. 또한, 높은 정확성과 빠른 처리속도를 보였다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2011년도 춘계학술발표대회 논문집
• /
• pp.147-152
• /
• 2011

The purpose of this study is to find out the commercialization cause of 2nd class residential area in urban center as basic research to protect urban residential area against the pressure of commercialization. Through the research that are based on literature, field survey and urban planning map, it analysed the commercialization cause of selected two sites under similar urban condition ; to be a nearby subway station and to be a famous commercial street in site, etc. The consequences of this study are summarized as follows ; First the distance between subway station and residential block and residential commercialization are in inverse proportion each other. Second, the corner lot of a block and the access street directly connected collector street are very important factors to spread commercialization to residential area. Finally, nevertheless first and second results, there is square zone which is very high rate of commercialization within one regardless the distance between subway and residential block. the maximum range of square zone is assumed about 250 meter based on case study.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.314-319
• /
• 2005

When a robot navigates in the real environment, it frequently meets various environments that can be expressed by simple geometrical shapes such as fiat floor, uneven floor, floor with obstacles, slopes, concave or convex corners, etc. Among them, the convex corner composed of two plain surfaces is the most difficult one for the robot to negotiate. In this paper, we propose a gait planning algorithm to help the robot overcome the convex environment. The trajectory of the body is derived from the maximum distance between the edge boundary of the corner and the bottom of the robot when it travels in the convex environment. Additionally, we find the relation between kinematical structure of the robot and its ability of avoiding collision. The relation is realized by considering the workspace and the best posture of the robot in the convex structure. To provide necessary information for the algorithm, we use an IR sensor attached in the leg of the robot to perceive the convex environment. The validity of the gait planning algorithm is verified through simulations and the performance is demonstrated using a quadruped walking robot, called "MRWALLSPECT III"( Multifunctional Robot for WALL inSPECTion version 3).

• Smart Structures and Systems
• /
• 제21권5호
• /
• pp.561-569
• /
• 2018

Ground vibration is one of the most undesirable effects induced by blast operation in mountain tunnels, which could cause negative impacts on the residents living nearby and adjacent structures. The ground vibration effects can be well represented by peak particle velocity (PPV) and corner frequency ($f_c$) on the ground. In this research, the PPV and the corner frequency of the mountain surface above the large-span tunnel of the new Badaling tunnel are observed by using the microseismic monitoring technique. A total of 53 sets of monitoring results caused by the blast inside tunnel are recorded. It is found that the measured values of PPV are lower than the allowable value. The measured values of corner frequency are greater than the natural frequencies of the Great Wall, which will not produce resonant vibration of the Great Wall. The vibration effects of associated parameters on the PPV and corner frequency which include blast charge, rock mass condition, and distance from the blast point to mountain surface, are studied by regression analysis. Empirical formulas are proposed to predict the PPV and the corner frequency of the Great Wall and surface structures due to blast, which can be used to determine the suitable blast charge inside the tunnel.