• Proceedings of the Korean Society of Grassland Science Conference
• /
• 2002.09b
• /
• pp.103-127
• /
• 2002

The main problem of the forage-based livestock farming in Germany at the moment is the high yielding cow requiring high energy concentration in feed which can be obtained lot easier with corn and grain than with grass. Therefore milk production tends out of the grassland region and into the forage crop region. Nutrient surplus due to concentrates in milk production in future probably will be limited by the government. The problem can only be solved by using best swards and optimal silage techniques as well as optimisation of manure utilization. Most important steps of sustainable forage production are care of grassland as well as regular resowing, especially of silage meadows. About 40% of Hessian grassland is managed in agri-environmental problems to keep it in use and to protect the natural resources. Selective measures are realized, to solve special problmes of nature and landscape conservation.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.55-55
• /
• 2022

Purple com Saekso 1 was developed by Maize Research Institute (Hongcheon, Gangwon, Korea) and registered in 2011. Saekso 1 is a anthocyanin-rich hybrid variety that is yellow grain, purple husk and cob. Purple husk and cob of Saekso 1 is as a resource for the bioactive material by health food. In order to investigate optimum sowing date and planting density of Saekso 1. Agronomic characteristics were compared by sowing times April 25, May 15 and June 5. Husk dry weight were 68,72 and 70kg·10a-1, respectively. Cob dry weight were 90, 92 and 92kg·10a-1, respectively. Content of cyanidin-3-glucoside in husk were 0.56, 0.62 and 0.56% and in cob were 0.19, 0.14 and 0.17%. Therefore, the sowing time to increase husk and cob weight and content of cyanidin-3-glucoside is appropriate for planting in mid-May. The number of plants in planting density trial was 9,400, 7,000, 5,700 and 4,700 plants in 10a area. Plant height at each trial were 249, 250, 246 and 248cm, respectively. Husk dry weight were 76, 67 and 63 and 60kg·10a-1, respectively. Cob dry weight were 112, 92, 87 and 81kg·10a-1, respectively. Content of cyanidin-3-glucoside in husk were 0.70, 0.71, 0.71 and 0.75% and in cob were 0.21, 0.28, 0.26 and 0.20%. Therefore, appropriate sowing time was in mid-May and planting density was 5,700~7,000 plants·10a-1 in order to increase the yield and content of cyanidin-3-glucoside of purple com in South Korea.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.2
• /
• pp.94-99
• /
• 2013

Yanganok, a new single cross variety, was developed by the maize breeding team at the National Institute of Crop Science (NICS), RDA in 2012. This hybrid, which has a high yield of grain was produced by crossing two inbred lines, KS164 and KS163. KS164 is the seed parent and KS163 is the pollen parent of Yanganok. It is a yellow-orange intermediate maize hybrid (Zea mays L.). After a preliminary yield trial and advanced yield trial of Yanganok (Suwon180) in Suwon for 2 years, a regional yield trial was carried out for its growth characteristics, and yields were determined at 4 different locations from 2009 to 2012, with the exception of 2010. It was named 'Yanganok'. The silking date of Yanganok is 2 days earlier than that of the check hybrid, Kwangpyeongok. Plant height of Yanganok is similar to Kwangpyeongok, but its ear height ratio is higher than that of Kwangpyeongok. It has resistance to lodging. Stay-green features of Yanganok are similar to those of Kwangpyeongok. The ear ratio of Yanganok is similar to Kwangpyeongok. It has moderate resistance to southern leaf blight (Bipolaris maydis) and strong resistance to northern leaf blight (Exserohilum turcicum). It has moderate resistance to black streaked dwarf virus (BSDV), ear lot and corn borer. The dry matter yield of Yanganok, 17.45 ton/ha, was similar to that of Kwangpyeongok. The total digestible nutrients (TDN) yield of Yanganok, 11.96 ton/ha, was similar to that of Kwangpyeongok. The grain yield of Yanganok, 8.32 ton/ha was similar to that of Jangdaok. Seed production of Yanganok went well due to a good match during crossing between the seed parent, KS164, and the pollen parent, KS163, in Yeongwol, and F1 seed yield was 1.79 ton/ha. Yanganok would be a suitable cultivar to all plain areas in the Korean peninsula.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.1
• /
• pp.21-25
• /
• 2014

Singwangok, a new single cross variety, was developed by the maize breeding team at the National Institute of Crop Science (NICS), RDA in 2012. This hybrid, consisting of a high yield of grain, was produced by crossing two inbred lines, KS172 and KS173. KS172 is the seed parent and KS173 is the pollen parent of Singwangok. It is a yellow-orange intermediate maize hybrid (Zea mays L.). After the preliminary yield trial and advanced yield trial of Singwangok (Suwon185) in Suwon for 2 years, the regional yield trial of that was subsequently carried out for its growth characteristics and yield at 3 different locations from 2010 to 2012. It was named as Singwangok. The silking date of Singwangok is similar to the check hybrid, Jangdaok. The plant height of Singwangok is similar to Jangdaok, but its ear height ratio is lower than that of Jangdaok. Moreover, it has a resistance to lodging. The ear number per 100 plants of Singwangok is more 17 than that of Jangdaok, whereas the ear length of Singwangok is similar to Jangdaok. Further, the weight of 100 seeds of Singwangok is similar to Jangdaok. It has a moderate resistance to southern leaf blight (Bipolaris maydis) and a strong resistance to northern leaf blight (Exserohilum turcicum). Furthermore, it has a moderate resistance to the black streaked dwarf virus (BSDV), ear lot and corn borer. The grain yield of Singwangok, 7.81 ton/ha, was similar to that of Jangdaok. The seed production of Singwangok was well processed due to the good match during crossing between the seed parent, KS172 and the pollen parent, KS173, in Yeongwol; the F1 seed yield was 3.84ton/ha. Singwangok would be a suitable cultivar to all plain areas in Korea.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.3
• /
• pp.197-204
• /
• 1989

To evaluate the effect of soil improvement on the chemical properties and corn silage yield, this experiment was carried out in the newly-reclaimed sloped land. Corn (Suwon 19) was cultivated under the six different treatments including integrated improvement plot at Songjeong loam, 20 percent slope, from 1985 to 1987 and various soil chemical properties and silage yield were investigated. pH of topsoil was above 5.0 except for control and phosphate plot, but lime and integrated improvement plots were above 5.0 in subsoil. The contents of organic matter of topsoil were above 2.0% except control and subsoiling plot. Except control, the range of cation exchange capacity was 7.4-7.8 me/100g in topsoil, 7.0-7.7 me/100g in subsoil. Soil bacteria density of root zone was the highest in integrated improvement than the other treatments, and it was higher at the harvesting stage than the heading stage. Mean density of microorganism was $61.3{\times}10^5$ in bacteria, $21.5{\times}10^4$ in fungi and actinomycetes was B/F ratio was 28.5 and B/A ratio was 2.9. Vertical root distribution of total and 10cm depth below was more in the integrated improvement and subsoi ling plot than the other plots. Total nitrogen (T-N) content was higher in integrated improvement plot, and phosphate content of leaves was higher in compost and integrated improvement plot, but stem and grain were not different. Potassium content of the plant was higher in integra ted improvement plot. Correlation between dry matter yield and T-N was more significant than the other elements. And the contents of phosphate, calcium and magnesium were significant at 5%, but potassium was not.

• KSBB Journal
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2008

The world demand of ethanol as an alternative fuel for gasoline is increasing rapidly because of high oil price and global climate change. Most of ethanol is currently produced from corn grain or sugars in sugarcane and sugar beet. Because these sources compete with foods and animal feed and are not expected to be enough for future demand of ethanol. Thus, cellulosic ethanol from agricultural residues or wood has to be commercialized in near future. Typical cellulosic ethanol production consists of pretreatment, enzyme hydrolysis, fermentation and product separation. This paper reviews the principles and status of each step and discusses issues for cellulosic ethanol production.

• Korean Journal of Poultry Science
• /
• v.31 no.3
• /
• pp.165-170
• /
• 2004

The objective of this study was to evaluate the carcass and meat quality of broiler chicken when slaughtered after treating with different source of grain(T1, 100% corn; T2, 50% corn + 50% brown rice; T3, 100% brown rice) in broiler diet. The carcass weight was decreased when feeding level of rice increased. The yield of breast was higher in T2(18.6%) than T1(17.3%) and T3(l7.9%). The L values(L *) and b values(b*) in meat color were decreased as the feeding level of rice increased when compared to T1(P < 0.05). Warner-Bratzler shear force(WBS) values were higher in T2 and T3 compared to T1. Cooking loss(%) was increased for T2(23.49%) and T3(24.50%) compared to T1(22.90%). In fatty acid composition, linoleic acid(C18:2, n6) contents were significantly lower in T2(31.89%) and T3(27.89%) when compared to TI(33.21%)(P < 0.05), and the total contents of unsaturated fatty acids(UFA) were 76.85%(T1), 77.22%(T2), or 75.49%(T3). The ratio of n6/n3 was decreased as the level of rice increased in the feed(T1 19.89%, T2 17.73%, and T3 17.01%). In conclusion, the meat quality was not significantly different between T1 and T2 from the results of carcass weight, meat color, WBS, and fatty acid composition; therefore, brown rice can be substituted for 50% of corn in the broiler diets.

• Korean Journal of Food Science and Technology
• /
• v.40 no.5
• /
• pp.551-557
• /
• 2008

In order to investigate the effect of different ingredients on the quality of Korean rice wines, 30% of rice were substituted by malt, corn, potato, soybean, glutinous millet, unpolished rice, glutinous rice, or non-glutinous rice, when rice wines were prepared. Physicochemical and sensory characteristics of the rice wines from the varying ingredients were evaluated. Sample rice wines were analyzed for ethanol, pH, total acid, amino acid, soluble solid, coloring degree, UV absorbance, reducing sugar, organic acids, and free sugars. After fermentation for 16 days, the ethanol contents ranged from 13.28 to 16.23%, while the total acid levels were within the range of 0.27 to 0.32%. The amino acid contents in eight samples ranged from 0.18 to 0.36%, while the soluble solid contents were within the range of 8.35 to $11.1^{\circ}$Bx. Among the eight samples tested, rice wine prepared with malt showed the highest level of coloring degree, UV absorbance, and reducing sugar levels, while rice wine prepared with potato showed the lowest value. Organic acid contents of rice wines prepared with soybean, glutinous rice, and non-glutinous rice showed the highest levels of succinic acid followed by acetic acid, citric acid, malic acid, and pyroglutamic acid. Free sugar contents of all rice wines showed the higher levels of glucose followed by fructose and maltose. Rice wines prepared with unpolished rice and corn showed the same highest overall sensory preference. By descriptive analysis, the overall mean sensory intensities of samples prepared with glutinous rice and non-glutinous rice, showed similar levels of 'sweetness', 'fruitiness', and 'freshness of aroma', while those samples prepared with soybean, glutinous millet, and potato showed stronger intensities of 'nuruk', 'grain aroma', and 'yellowness'. Rice wine prepared with corn showed middle ranges in all sensory attributes tested.

• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.65-83
• /
• 1979

Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well. 2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air. 3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying. 4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis. 5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time. 6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture. 7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation. 8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise. 11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss. 12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method. 13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated. Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year. 14. Required fan horsepower and energy for the intermittent fan operation were 3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation. 15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use. 16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.64-64
• /
• 1979

Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well.2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air.3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying.4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis.5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time.6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture.7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation.8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise.11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss.12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method.13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated.Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year.14. Required fan horsepower and energy for the intermittent fan operation were3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation.15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use.16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.