• Journal of Conservation Science
• /
• v.17 s.17
• /
• pp.73-82
• /
• 2005

The Bunhwangsaseoktop is the oldest stone brick pagoda in Silla Period. The pagoda body is made by piling small brick-shaped stones trimmed from black andesite and the first-story core has a shrine, which is made by granite. In 1915 it was repaired on a large scale, but now is severely damaged. Many kind of the stone decay like flaking, granular disintegration have occurred especially on the granite surface of the pagoda. In this study have been investigated the stone decay type and its cause in relation to efflorescence on the body part. Various analysis show that the deterioration on the granite is due to the same materials that lead to efflorescence on the body stone surface. The soluble salt like sodium nitrate, calcium sulfate and sodium sulfate come from white joint mortar. This salt solution is recrystallized in the outside of the pagoda, but most of them flow down with rain. In This process the porous granite absorbes the dissolved salts with moisture into the inside by capillary action. In order to reduce this problem, therefore, white joint moral is changed with other less soluble materials. And it is necessary to take steps to prevent water from seep into the inside of the stone, because this water dissolves the white joint mortar.

• The Journal of Engineering Geology
• /
• v.19 no.3
• /
• pp.323-330
• /
• 2009

Electrical resistivity survey is applied for estimation of inferred fault and fractured zone in civil engineering and environment field. While 15 m diameter and 3 lines tunnels are excavated. It is recognized that core stone and fractured zone is existed in the weathered slope of the entrance to a tunnel. To make confirmation geological characteristics, dipole-dipole electric resistivity survey was carried out in weathered slope of the entrance to a tunnel. Core stone distribution and fracture zone characteristics are estimated by reverse analysis and 2D-resistivity structure using FDM.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.19 no.4
• /
• pp.47-60
• /
• 2013

Purpose: This study examines construction core plans for the users of vertical-typed general hospitals to effectivly use the flow line. Methods: The study sampled representative 9 hospitals, calculated the depth value through Convex Map of Space Syntax and Justified Graph according to the determination of form of construction cire, and analyzed its functional connectivity. Results: The analysis of the connectivity between operation core part and emergency part of core space with high importance in the hospitals showed that the types of hospital and hospital have the lowest depth value in the spatial phase diagram, where central treatment part and outpatient part are arranged well vertically. Elevators for patients at these hospitals are close to operation and emergency parts actually separated from the elevators for passengers. For shortening of flow line of patients and private movement environment, however, it is desirable to arrange the elevators for patients to be adjacent to the operation parts and to arrange the emergent patient entrances more effectively to separate them from the flow line of visitors and guardians. Implications: Consideration should be taken into account for the effective flow line design. This study hopefully may serve as a stepping stone for the standard design of horizontal/vertical flow line.

• Journal of architectural history
• /
• v.10 no.2 s.26
• /
• pp.7-19
• /
• 2001

Ip-am valley, located at the eastern remote part of Korean peninsular was the place where a remarkable Confucian scholar Chang Hyon-gwang spent his secluded days. A large upright stone, called Ip-am, and undulating streams nearby were surrounded by mountains, which formed a large enclosed valley. After selecting 28 natural and artificial places, Chang named each of them. Chang compared the relationship between Ip-am and the 28 places with that of the Polestar and 28 Lunar Lodgings, which were known as the ancient Chinese astronomical concept. Also, Chang regarded the valley as a place where the Taoistic Deity could stay. Chang, who had deep knowledge of astronomy, wrote some books on it. It could be said that the comparison of his hermitages with the Polestar and the 28 Lunar Lodgings resulted from his deep passion for astronomy. He considered the Ip-am valley to be the core of the universe like the Polestar is the core of the celestial world. Some stars like the Polestar or the Dipper were regarded as the Deities of Taoism. We can find that Confucian scholars of the middle Choseon, like Chang Hyon-gwang, also tended to have some concern about Taoism.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.2
• /
• pp.361-368
• /
• 2013

Objectives : The purpose of this in vitro study was to evaluate the effect of firing cycles on the marginal and internal fit of metal ceramic crown. Methods : Ten same cases of stone models (abutment teeth 11) were manufactured. Ten cobalt-chrome cores were made per each models and the marginal and internal fit was evaluated through a silicone replica technique. The marginal and internal fit of specimens was measured twice. The first measurement was done after manufacturing cobalt-chrome alloy core and the second measurement was done after porcelain firing. T-test of paired sample for statistical analysis was executed with SPSS 12.0K for Windows (${\alpha}$=0.05). Results : Mean(SD) marginal and internal fit were 77.1(23.3) ${\mu}m$ for the cobalt-chrome alloy core group and 84.4(21.9) ${\mu}m$ for the metal-ceramic crown group. They were statistically significant differences between groups for marginal and internal fit (p<.05). Conclusions : All metal ceramic crowns showed marginal and internal fit ranged within the current clinical recommendations.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.489-500
• /
• 2004

Statement of problem: The use of zirconia prostheses fabricated with CAD/CAM system is on an increasing trend in dentistry. However, evaluation of the fit related to internal relief and marginal reproducibility of zirconia has not been reported. Purpose : This study was to evaluate the fit related to internal relief and marginal reproducibility of zirconia core fabricated with CAD/CAM system. Materials and methods: The evaluation was based on 30 zirconia cores and 5 IPS-Empress2 cores. Zirconia cores were fabricated in different conditions of internal relief(0, 10, 20, 30, 40 and $50{\mu}m$), and IPS-Empress2 cores were fabricated in accordance with the manufacturer's instructions. Before cementation, the marginal discrepancies or cores were measured on metal die. And then, each core was cemented to stone die, embedded in an acrylic resin and sectioned in two planes(mesiodistally and labiopalatally). The internal gaps were measured at the margin and axial surface. Measurements for the marginal discrepancies, the internal marginal gaps and the internal axial gaps were performed under a measuring microscope(Compact measuring microscope STM5; Olympus, Japan) at a magnification of ${\times}100$. In addition, the marginal conagurations of metal die, zirconia core and IPS-Empress2 core were examined with SEM(S-2700, Hitachi, Japan). Results : Within the limits of this study the results were as follows. 1. Compared with IPS-Empress2 cores, the marginal discrepancies of zirconia cores had no significant differences. the internal marginal gaps were statistically smaller and the internal axial gaps were statistically larger in each condition of internal relief. 2. The marginal discrepancies and the internal marginal gaps of zirconia cores had no significant differences related to the conditions of internal relief(P>0.05). 3. The internal axial gaps of zirconia cores with $0{\sim}20{\mu}$m for internal relief were significantly larger than that with $50{\mu}m$ (P<(0.0001). 4. SEM micrographs showed favorable marginal reproducibility of zirconia core and smooth texture on the milling surface. Conclusion: The marginal discrepancy and the internal gaps of zirconia core were clinically acceptable and the milling surface was showed smooth texture. For fabrication of the durable esthetic restoration, further investigations on complex design of core, milling accuracy, compatability of enamel porcelain and porcelain firing seems to be needed.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.240-247
• /
• 2012

Marginal and internal fit is an important part of the longevity of dental restorations. The purpose of this study was to analysis the marginal and internal fit of zirconia core by dental CAD/CAM system using innovative and non-destructive methods such as optical coherence tomography(OCT) and compare with conventional method such as silicone replica technique(SRT). Ten dental stone models of abutment of maxillary right central incisal were manufactured and scanned. Ten zirconia cores were fabricated with commercial CAD/CAM system. To measure the marginal and internal fit of each sample, five point of fitness were measured using 2 different methods(OCT and SRT). Statistical analysis was performed using independent sample t-test(${\alpha}$=0.05). OCT and SRT groups were not significantly different(P>0.05). By this results, analysis the fitness of dental restorations using OCT were acceptable measuring method.

• Journal of Technologic Dentistry
• /
• v.35 no.1
• /
• pp.57-64
• /
• 2013

Purpose: Waste parts of zirconia blocks and powders were remained after CAD/CAM process. In order to make these residual zirconia fit for practical use, zirconia single cores were produced by drain casting process. Methods: Remained zirconia blocks were reduced to powders with zirconia mortar, and screened with 180 mesh sieve. Zirconia slip was prepared from waste parts of zirconia by ball milling. Plaster molds for forming cores by slip casting were also prepared. Formed cores were removed from mold after partial drying. Dried cores were biscuit fired at $1,100^{\circ}C$ for 1hour. Biscuit fired cores were treated with tools to control the fitness and thickness. Finished cores were $2^{nd}$ fired at $1,500^{\circ}C$ for 1hour. Microstructure of cross section of core was observed by SEM. Results: When mill pot was filled with 100g of zirconia and alumina mixed powder, 300g of zirconia ball, and 180g of distilled water, the optimum slip for drain casting was obtained. Gypsum plaster for ceramic forming was more suitable then yellow stone plaster for casting process. SEM photograph showed the microstructure of fully dense with uniform grain size of zirconia and well dispersed alumina grains into the zirconia matrix. Conclusion: Zirconia single cores were produced by drain casting process. Drain casting is useful process to make these residual zirconia fit for practical use. Further study will be focused on the preparation of the bridge type cores by casting.

• Asia pacific journal of information systems
• /
• v.11 no.3
• /
• pp.23-42
• /
• 2001

Recently, knowledge management becomes a core management tool for efficient and effective organizations. However, there are little known researches on measuring knowledge management level. The objective of this paper is to develop a process capability model for knowledge management of an organization. We developed 5 stage process capability model for knowledge management. The 1st stage is the initial stage where no significant knowledge management activity is performed. The 2nd stage is the performed stage where planning and tracking activities are performed on organization level. The 3rd stage is the established, and the 4th stage is the predictable stage where processes and results of knowledge management can be predictable. Final stage is the optimizing stage where knowledge management process is continuously improved at an organizational level. We surveyed 37 korean companies to test the validity of the proposed stage model. Statistical tests show that the developed stage model of knowledge management is valid and sound in general conditions. The result of this study on process capability model can be a solid stepping stone for future works in this area.

• Perspectives in Nursing Science
• /
• v.8 no.2
• /
• pp.156-166
• /
• 2011

Purpose: The purpose of this study was to understand the process of exercise adherence in middle aged women. Methods: The qualitative theme analysis method was used. The participants were 11 middle-aged women who had exercised over 6 months. Data were collected through in-depth interviews and recorded by and transcribed immediately. The data were coded with similar meaning and analysis themes with the constant comparative method. Results: The core theme was Stepping Stones Across the Stream (SSAS). The Stone means the adherence factors in exercise. The stream means the interrupting factors in exercise adherence. The subcategories were 1) feeling of developmental crisis, 2) searching for exit (from the developmental crisis), 3) finding a surprising new world (full of fun), 4) confronting the situation of dropout, and 5) adherence to exercise by SSAS. Conclusion: The predisposition of fun in middle aged women for the adherence of exercise should be explored along with more adherent factors.