• 보존과학회지
• /
• 제17권
• /
• pp.73-82
• /
• 2005

분황사석탑은 가장 오래된 신라시대의 모전석탑이다. 탑신부는 벽돌처럼 제작된 검은 안산암으로 이루어져 있으며, 화강암으로 조성된 감실이 1층탑신석에 있다. 1915년 대대적인 수리가 행해졌으나, 현재 석탑의 구성암석에서는 여러 손상의 형태들이 나타나고 있다. 특히 구성화강암 표면에서는 박리 사질상입자분해 등이 심하게 나타나고 있다. 본 연구에서는 다양한 분석을 통하여 구성화강암의 정확한 훼손현황을 살펴보았고, 탑신부에 나타나고 있는 백화현상과의 관계를 통해 그 손상원인을 찾아보았다. 연구결과, 구성 화강암은 석탑 표면에 발생된 백화현상의 원인 물질로 인해 훼손이 가중되고 있는 것으로 알려졌다. 백화현상의 원인 물질은 질산나트륨. 황산칼슘, 황산나트륨 등의 수용성 염류로, 백색 줄눈몰타르에서 기인한 것이다. 석탑의 외부는 이러한 백색 줄눈몰타르가 수분과 반응하여 재결정화되고 있지만, 많은 부분이 빗물에 의해 씻겨 내려가다가 밖으로 배수되는 것으로 생각된다. 이 과정에서 빗물에 용해된 염성분들이 감실을 구성하고 있는 화강암을 거쳐가게 되고, 다공성의 화강암은 모세관현상에 의해 이 염들을 수분과 함께 암석의 내부로 흡수한다. 그러므로 구성화강암이 갖고 있는 염문제를 줄일 수 있는 방법은 백색 줄눈몰타르를 용해성이 적은 다른 물질로 대체하는 것이다. 또한 석탑내부로 흘러들어온 수분이 백색 줄눈몰타르를 용해시킬 수 있기 때문에, 상부에서 석탑내부로 수분이 흘러내리지 않도록 조치를 취하는 것이 필요하다.

• 지질공학
• /
• 제19권3호
• /
• pp.323-330
• /
• 2009

전기비저항 탐사는 최근 토목설계 및 환경분야에 있어서 단층 및 파쇄대의 탐지 등에 활발히 적용되고 있다. 국내에서는 지금까지 시공실적이 없는 직경 15 m 3열의 터널 굴착공사를 시행하는 도중 터널 유입부 지반이 당초 설계와 달리 기반암선이 낮게 형성되었고, 풍화된 사면에 핵석과 파쇄대가 존재하는 것으로 나타났다. 터널 유입부 지반의 분포양상을 정확히 파악하고자 전기비저항 쌍극자탐사를 시행하였다. 전기비저항 탐사는 암석의 종류, 공극, 온도 및 지질적 순환과정 등을 통하여 외견비저항 값이 많은 변화를 보인다. 역산해석 후 전기비저항치에 의한 지반특성을 파악하였고 유한차분법을 활용한 2차원 전기비저항 구조도를 적용하여 파쇄대를 추정하였다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제19권4호
• /
• pp.47-60
• /
• 2013

Purpose: This study examines construction core plans for the users of vertical-typed general hospitals to effectivly use the flow line. Methods: The study sampled representative 9 hospitals, calculated the depth value through Convex Map of Space Syntax and Justified Graph according to the determination of form of construction cire, and analyzed its functional connectivity. Results: The analysis of the connectivity between operation core part and emergency part of core space with high importance in the hospitals showed that the types of hospital and hospital have the lowest depth value in the spatial phase diagram, where central treatment part and outpatient part are arranged well vertically. Elevators for patients at these hospitals are close to operation and emergency parts actually separated from the elevators for passengers. For shortening of flow line of patients and private movement environment, however, it is desirable to arrange the elevators for patients to be adjacent to the operation parts and to arrange the emergent patient entrances more effectively to separate them from the flow line of visitors and guardians. Implications: Consideration should be taken into account for the effective flow line design. This study hopefully may serve as a stepping stone for the standard design of horizontal/vertical flow line.

• 건축역사연구
• /
• 제10권2호
• /
• pp.7-19
• /
• 2001

Ip-am valley, located at the eastern remote part of Korean peninsular was the place where a remarkable Confucian scholar Chang Hyon-gwang spent his secluded days. A large upright stone, called Ip-am, and undulating streams nearby were surrounded by mountains, which formed a large enclosed valley. After selecting 28 natural and artificial places, Chang named each of them. Chang compared the relationship between Ip-am and the 28 places with that of the Polestar and 28 Lunar Lodgings, which were known as the ancient Chinese astronomical concept. Also, Chang regarded the valley as a place where the Taoistic Deity could stay. Chang, who had deep knowledge of astronomy, wrote some books on it. It could be said that the comparison of his hermitages with the Polestar and the 28 Lunar Lodgings resulted from his deep passion for astronomy. He considered the Ip-am valley to be the core of the universe like the Polestar is the core of the celestial world. Some stars like the Polestar or the Dipper were regarded as the Deities of Taoism. We can find that Confucian scholars of the middle Choseon, like Chang Hyon-gwang, also tended to have some concern about Taoism.

• 한국치위생학회지
• /
• 제13권2호
• /
• pp.361-368
• /
• 2013

Objectives : The purpose of this in vitro study was to evaluate the effect of firing cycles on the marginal and internal fit of metal ceramic crown. Methods : Ten same cases of stone models (abutment teeth 11) were manufactured. Ten cobalt-chrome cores were made per each models and the marginal and internal fit was evaluated through a silicone replica technique. The marginal and internal fit of specimens was measured twice. The first measurement was done after manufacturing cobalt-chrome alloy core and the second measurement was done after porcelain firing. T-test of paired sample for statistical analysis was executed with SPSS 12.0K for Windows (${\alpha}$=0.05). Results : Mean(SD) marginal and internal fit were 77.1(23.3) ${\mu}m$ for the cobalt-chrome alloy core group and 84.4(21.9) ${\mu}m$ for the metal-ceramic crown group. They were statistically significant differences between groups for marginal and internal fit (p<.05). Conclusions : All metal ceramic crowns showed marginal and internal fit ranged within the current clinical recommendations.

• 대한치과보철학회지
• /
• 제42권5호
• /
• pp.489-500
• /
• 2004

Statement of problem: The use of zirconia prostheses fabricated with CAD/CAM system is on an increasing trend in dentistry. However, evaluation of the fit related to internal relief and marginal reproducibility of zirconia has not been reported. Purpose : This study was to evaluate the fit related to internal relief and marginal reproducibility of zirconia core fabricated with CAD/CAM system. Materials and methods: The evaluation was based on 30 zirconia cores and 5 IPS-Empress2 cores. Zirconia cores were fabricated in different conditions of internal relief(0, 10, 20, 30, 40 and $50{\mu}m$), and IPS-Empress2 cores were fabricated in accordance with the manufacturer's instructions. Before cementation, the marginal discrepancies or cores were measured on metal die. And then, each core was cemented to stone die, embedded in an acrylic resin and sectioned in two planes(mesiodistally and labiopalatally). The internal gaps were measured at the margin and axial surface. Measurements for the marginal discrepancies, the internal marginal gaps and the internal axial gaps were performed under a measuring microscope(Compact measuring microscope STM5; Olympus, Japan) at a magnification of ${\times}100$. In addition, the marginal conagurations of metal die, zirconia core and IPS-Empress2 core were examined with SEM(S-2700, Hitachi, Japan). Results : Within the limits of this study the results were as follows. 1. Compared with IPS-Empress2 cores, the marginal discrepancies of zirconia cores had no significant differences. the internal marginal gaps were statistically smaller and the internal axial gaps were statistically larger in each condition of internal relief. 2. The marginal discrepancies and the internal marginal gaps of zirconia cores had no significant differences related to the conditions of internal relief(P>0.05). 3. The internal axial gaps of zirconia cores with $0{\sim}20{\mu}$m for internal relief were significantly larger than that with $50{\mu}m$ (P<(0.0001). 4. SEM micrographs showed favorable marginal reproducibility of zirconia core and smooth texture on the milling surface. Conclusion: The marginal discrepancy and the internal gaps of zirconia core were clinically acceptable and the milling surface was showed smooth texture. For fabrication of the durable esthetic restoration, further investigations on complex design of core, milling accuracy, compatability of enamel porcelain and porcelain firing seems to be needed.

• 한국콘텐츠학회논문지
• /
• 제12권8호
• /
• pp.240-247
• /
• 2012

보철물이 구강 내 제 기능을 하기 위해 가장 중요한 요소 중 하나는 적합도이다. 본 연구의 목적은 그 동안 시도되지 않았던 광간섭단층영상기를 이용하여 비파괴적인 방법으로 적합도를 측정해보고, 측정된 값을 기존의 방법으로 측정된 값과 비교하여 보고자 한다. 실험을 위해 상악 우측 중절치가 지대치인 석고모형 10개를 제작하고 치과용 캐드캠으로 각각의 모형에 해당하는 지르코니아 코어를 10개 제작하였다. 시편 당 5부위 씩 광간섭단층영상기로 적합도를 측정하고, 같은 부위를 기존의 방법인 실리 복제본 기술로 측정하였다. 두 집단 간의 평균 값에 유의한 차이가 있는지 알아보기 위해 독립표본 t-검정을 실시하였다(${\alpha}$=0.05). 그 결과 측정된 두 집단 간의 평균 값에는 유의한 차이를 보이지 않았고(P>0.05), 이러한 결과로 미루어 볼 때 앞으로 광간섭단층영상기를 이용한 보철물의 적합도 측정이 가능할 것으로 사료된다.

• 대한치과기공학회지
• /
• 제35권1호
• /
• pp.57-64
• /
• 2013

Purpose: Waste parts of zirconia blocks and powders were remained after CAD/CAM process. In order to make these residual zirconia fit for practical use, zirconia single cores were produced by drain casting process. Methods: Remained zirconia blocks were reduced to powders with zirconia mortar, and screened with 180 mesh sieve. Zirconia slip was prepared from waste parts of zirconia by ball milling. Plaster molds for forming cores by slip casting were also prepared. Formed cores were removed from mold after partial drying. Dried cores were biscuit fired at $1,100^{\circ}C$ for 1hour. Biscuit fired cores were treated with tools to control the fitness and thickness. Finished cores were $2^{nd}$ fired at $1,500^{\circ}C$ for 1hour. Microstructure of cross section of core was observed by SEM. Results: When mill pot was filled with 100g of zirconia and alumina mixed powder, 300g of zirconia ball, and 180g of distilled water, the optimum slip for drain casting was obtained. Gypsum plaster for ceramic forming was more suitable then yellow stone plaster for casting process. SEM photograph showed the microstructure of fully dense with uniform grain size of zirconia and well dispersed alumina grains into the zirconia matrix. Conclusion: Zirconia single cores were produced by drain casting process. Drain casting is useful process to make these residual zirconia fit for practical use. Further study will be focused on the preparation of the bridge type cores by casting.

• Asia pacific journal of information systems
• /
• 제11권3호
• /
• pp.23-42
• /
• 2001

Recently, knowledge management becomes a core management tool for efficient and effective organizations. However, there are little known researches on measuring knowledge management level. The objective of this paper is to develop a process capability model for knowledge management of an organization. We developed 5 stage process capability model for knowledge management. The 1st stage is the initial stage where no significant knowledge management activity is performed. The 2nd stage is the performed stage where planning and tracking activities are performed on organization level. The 3rd stage is the established, and the 4th stage is the predictable stage where processes and results of knowledge management can be predictable. Final stage is the optimizing stage where knowledge management process is continuously improved at an organizational level. We surveyed 37 korean companies to test the validity of the proposed stage model. Statistical tests show that the developed stage model of knowledge management is valid and sound in general conditions. The result of this study on process capability model can be a solid stepping stone for future works in this area.

• Perspectives in Nursing Science
• /
• 제8권2호
• /
• pp.156-166
• /
• 2011

Purpose: The purpose of this study was to understand the process of exercise adherence in middle aged women. Methods: The qualitative theme analysis method was used. The participants were 11 middle-aged women who had exercised over 6 months. Data were collected through in-depth interviews and recorded by and transcribed immediately. The data were coded with similar meaning and analysis themes with the constant comparative method. Results: The core theme was Stepping Stones Across the Stream (SSAS). The Stone means the adherence factors in exercise. The stream means the interrupting factors in exercise adherence. The subcategories were 1) feeling of developmental crisis, 2) searching for exit (from the developmental crisis), 3) finding a surprising new world (full of fun), 4) confronting the situation of dropout, and 5) adherence to exercise by SSAS. Conclusion: The predisposition of fun in middle aged women for the adherence of exercise should be explored along with more adherent factors.