• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.2
• /
• pp.177-197
• /
• 1995

The endodontically treated tooth is generally restored with post & core, owing to the brittleness and the loss of large amount of tooth structure. Although there have been lots of studies about the endodontically treated teeth, the three-dimensional quantitative studies about the strees distribution of them are in rare cases. In this study, it was assumed that the coronal portion of the upper incisou had severely damaged. After the root canal therapy it was post cored, and restored with PFM crown, for this experiment nine types of model were constructed : 1); long, 2); medium, 3); short gold post for the roots supported with a narmal alveolar bone, 4); long, 5); medium, 6); short gold post for the roots supported with an alveolar bone resorbed to its 1/3 of root length, 7); long, 8); medium, 9); short base metal post for the roots supported with an alveolar bone resorbed to its 1/3 of root length. Force was applied from two directions. One was functional maximum bite force(300N) applied to the spot just lingual to the incisal edge with the angle of 45 degrees to the long axis of the tooth, and the other one was horizontal force(300N) applied to the labial surface. The results analyzed with three-dimensional finite element method were as follows : 1. Stress was concentrated on the middle portion of the labial side dentin of the root and the lingual portion of the apical dentin of the root. Stress in the post showed maximum value at 2 mm above the post apex. 2. In case of the long post and base metal post, strees was concentrated on the apex of the root and the post. 3. In case of the longer post, the displacement on the post-cement interface was lessened. The gold post was more displaceable than the base metal post. 4. In case of the alveolar bone resorption, stress concentrated on the root and the post and displacement on the post-cement interface were increased.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.526-531
• /
• 2010

Early childhood caries which mainly affect maxillary anterior area, defined as 'the presence of 1 or more decayed, missing, or filled tooth surfaces in any primary tooth in a child 71 months of age or younger'. Extraction of teeth when early childhood caries affected in maxillary primary incisors often develops progressively, result in severe destruction of crowns, acute or chronic pulpitis, and periapical abscess formation. Maxillary primary incisors are need to preserve as possible, because the early loss of maxillary primary incisors may lead to various functional, esthetical, and psychological problems. It is necessary to the availability of an easy to perform technique capable of providing efficient, durable, functional, and esthetic restorative methods. Polyethylene fiber-reinforced post can be used in strengthen of composite resins that is esthetic and good physical and mechanical properties. $Ribbond^{(R)}$ is made from an polyethylene fiber, has numerous usages, its surface is treated to enhance adhesion to resins, ease of manipulation, relatively cost effective. We report this case, had restored of maxillary primary incisors with severe coronal destruction due to affecting severe early childhood caries, using polyethylene fiber-reinforced posts, composite resin cores, and celluloid crowns. We could obtain good result of treatment.

• KDI Journal of Economic Policy
• /
• v.14 no.3
• /
• pp.3-21
• /
• 1992

By localizing the production of core parts and intermediate goods previously imported from Japan, Korean firms have been striving to increase their market share and profit in the final goods market in which Japanese firms are dominating. Korean producers' efforts, however, have often been thwarted by Japanese suppliers' "strategic" behavior. This competitive strategy involves Japanese exporters supplying parts and intermediate goods at very high prices until Korean firms must locally develop them, and then setting the prices far below the previous level so that the profitability of localization is dramatically reduced, or even means a loss for the Korean manufacturer. This paper intends to explain the strategic behavior of Japanese firms through the concepts of strategic interactions and joint economies. Strategic interactions can be aggressive or accommodating depending on whether competitors are dealing with strategic substitutes or complements. Joint economies exist in multi-stage competition when competition in the previous state favorably influences "profits" of the ensuing stage. Competiton between Korean and Japanese firms (a two-stage game involving production and technology rivalries) can be characterized by joint economies and strategic substitutes: joint economies since technological improvement results in more profits in the production stage; and strategic substitutes since an increase in marginal profits of one firm brings about a decrease in marginal profits of the other in a duopolitic production stage. This implies that the flood of "low price" Japense substitutes is an almost "natural" phenomenon in the context of the duopolistic market described in this paper. In the technology competition stage, on the other hand, technology development and technology transfer can be either strategic complements or substitutes. This implies that, in typical comparative static analyses, the effect of changes in exogenous variables cannot be expected a priori. Thus it becomes very difficult to determine the desirability of applying various policy measures such as countervailing duties, R&D subsidies, and creating demand for localized products. For these reasons, it is indeed likely that the measures suggested as means of circumventing the strategic behavior of Japanese firms (and enhancing technological development of Korean firms) may not work.

• Korean Journal of Biological Psychiatry
• /
• v.20 no.2
• /
• pp.45-53
• /
• 2013

Objectives Non-major depression with fewer symptoms than required for a Diagnostic and Statistical Manual of Mental Disorders-4th edition diagnosis of major depressive disorder (MDD) has consistently been found to be associated with functional impairment. In this study, we aim to estimate the cognitive impairment and the quality of life in elderly patients with subsyndromal depression (SSD) compared with non-depressive elderly (NDE). Methods The Korean version of Mini International Neuropsychiatric Interview was administered to 194 outpatients with depression and 108 normal controls. SSD is defined as having five or more current depressive symptoms with core depressive symptoms (depressive mood or loss of interest or pleasure) during more than half a day and more than seven days over two weeks. Depression was evaluated by the Korean form of Geriatric Depression Scale of a 15-item short version. Global cognition was assessed by Mini-Mental State Examination in the Korean version of CERAD assessment packet (MMSE-KC). Subjective cognitive impairment was assessed by the Subjective Memory Complaint Questionnaire. Quality of life was evaluated by the Korean Version of Short-Form 36-Item Health Survey. Results The mean score of the MMSE-KC in the SSD group was lower than that in the NDE group with adjustment for age, gender, and education [F = 4.270, p = 0.04, analysis of covariance (ANCOVA)]. If we defined those having Z-score of MMSE-KC < -1.5 as a high risk group of cognitive impairment, the odds ratio for the high risk group of cognitive impairment was 1.86 [95% confidence intervals (CI) 1.04-3.34] in SSD and 7.57 (95% CI 3.50-16.40) in MDD compared to NDE. The scores of physical component summary (F = 9.274, p = 0.003, ANCOVA) and mental component summary (F = 53.166, p < 0.001, ANCOVA) in the SSD group were lower than those in the NDE group with adjustment for age, gender, and education. Conclusions The subjects with SSD, as well as those with MDD, showed impairment of global cognition and also experienced low quality of life in both physical and mental aspects, compared to the NDE group.

• Korean Journal of Food Science and Technology
• /
• v.22 no.2
• /
• pp.123-128
• /
• 1990

In order to establish the optimal thawing condition of frozen fork, hot-air thawing and microwave thawing were evaluated at various conditions. In hot-air thawing, the higher the air temperature and the lower the meat surface temperature, the grater the thawing rate was. In microwave thawing, the grater the power and the lower the meat core temperature, the faster the thawing rate was. Comparing the two methods, microwave thawing was found to be significantly faster than hot-air thawing. TBA value and cooking loss were higher in hot-air thawing than that of refrigeration thawing or microwave thawing. Total extractable protein tended to be lower in hot-air thawing than that of the other two thawing methods. WHC decreased with the increase of hot-air and meat surface temperature whereas no significant difference was observed in microwave thawing regardless of the thawing conditions. Total microbial counts of thawed meat by the hot-air or microwave thawing were lower than that of refrigeration thawing.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.2
• /
• pp.3-10
• /
• 2000

The main purpose of this study were to estimate the benthic fluxes of dissolved inorganic nitrogen (DIN) from the sediment and denitrification rates in tidal flats of the Keum river estuary. Sediment specimens were collected by a core sampler from three stations along the Keum river estuary in April, August and December, 1999. The sediments were composed of 1.18 %, 29.34 % and 69.49 % of gravel and sand, sand and silt, respectively. The mean ignition loss of the sediment was found 6.7 % and its Oxidation Reduction Potential (ORP) was measured -12 mV. The total hydrogen sulfides was determined about 0.26 mg/gㆍdry. The estimated outflux of ammonium was found 11.2 m mole N/m²ㆍday from the sediment, whereas -1.09 m mole N/m²ㆍday of influx was obtained for nitrate and nitrite through the incubation experiment of sediment cores. Total DIN flux was 10.2 m mole N/m²ㆍday outflux from the sediment. From the incubation experiments executed with the flux studies, mean denitrification rate was found 30.6 m mole N₂/m²ㆍday measured by the direct assay of N₂ production technique. On the basis that DIN flux and denitrification rate in sediment of tidal flat of the Keum river estuary are may be effects to control the algal biomass in the coastal environment, it seems inevitable to pay more attention to investigate the flux of DIN and denitrification rate in tidal flat of the Keum river estuary.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.146-157
• /
• 2018

Over the last 10 years, the number of disasters has been increasing in Korea. As a result, the need for temporary residences or shelters for disaster conditions is increasing. In this study, post-disaster refugees housing was developed using lightweight composite panels that are lighter than the materials that make up the existing shelter. To accomplish this, the structural performance of the lightweight composite panel was validated. Among the performance tests on the panels, the transverse load test was conducted according to the ASTM E 72 criteria. As a result of the experiment, when each specimen was subjected to a uniformly distributed load, the allowable load was determined according to the span. All the experiments were ended due to a loss of adhesive at the junction of the skin and core. Further analysis was conducted to calculate the shear stress when the junction was dropped. The mean shear stress at the adhesive surface of a specimen, 150 mm and 200 mm in thickness, was 0.0170MPa and 0.0156MPa, respectively. This suggests that similar values were obtained from panels of equal thickness. In addition, this stress provides a criterion of judgment that could be used to inspect the structural performance of the panels. The performance of the panel was evaluated based on the allowable load, but it may be possible to increase the strength of the lightweight composite panel by improving the joining method to avoid separation from the junction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.138-144
• /
• 2017

With the increase in power consumption due to the surge in the demand for power, it is necessary to improve the quality or design of the power (supply) for the purpose of reducing the energy consumption and so reduce the power loss. The switchboard is a mechanical device that receives electricity from the electricity generation facilities of KEPCO and divides it into the facilities required for each building. Switchboards generally consist of enclosures, switches, power conductors, and control components. This study deals with energized power conductors, which constitute the main element in the switchboard. Through the measurement of the effective ac resistance, it was confirmed that the vertical array structure of the conventional type plate conductor is inefficient. If the effective AC resistance increases significantly, the sectional area of the conductor becomes relatively large due to the skin effect. In this study, we studied the energy and material savings that could be obtained using the asterisk (*) array structure, which minimizes the effective ac resistance by reducing the skin effect. The core technology principle of this study is the energy saving switchgear based on conductor resistance reduction technology utilizing the asterisk array structure. The present invention involves a plate-shaped conductor arrangement structure capable of canceling out the magnetic field generated on each of the plate conductors (rst or abc) of the AC power supply in the power distribution panel by mutual action. The effect of this structure is to reduce the amount of inductive reactance due to the increase in the cross-sectional area and reduction of the effective AC resistance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7B
• /
• pp.613-627
• /
• 2004

In this paper, we propose an Aggregate Fairness Maker (ARM) required for an Edge router to improve fairness of throughput among the flows of Assured Service in DiffServ with different round trip time (RTT) and we propose a user flow Three Color Marker (uf-TCM) as a flow marker that marks packets from the flow as green, yellow, or red. A yellow packet is the packet that consumes loss token in uf-TCM as well as that is demoted green packet in AM due to disobey the aggregate traffic profile. The proposed AFH promotes yellow packet to green packet or demotes green packet to yellow packet through the fair method without per-flow management, and it improves the feirness of throughput among the flows as well as link utilization. A yellow packet and a red packet have the same drop precedence at Core Router in our scheme. So we can use the RIO buffer management scheme. We evaluated the performance of our proposed AFM and the REDP Marker that was proposed to improve fairness without per-flow management. Simulation results show that, compared with the REDP marker, proposed AFM can improve performance of throughput fairness among the flows with different RTT and link utilization under the over-provisioning, exact-provisioning, and under-provisioning network environments at Multiple DiffServ domains as well as at Single DiffServ domain.

• Journal of Periodontal and Implant Science
• /
• v.48 no.3
• /
• pp.152-163
• /
• 2018

Purpose: To determine whether the swelling and mechanical properties of osmotic self-inflating expanders allow or not the induction of intraoral soft tissue expansion in dogs. Methods: Three different volumes (0.15, 0.25, and 0.42 mL; referred to respectively as the S, M, and L groups) of soft tissue expanders (STEs) consisting of a hydrogel core coated with a silicone-perforated membrane were investigated in vitro to assess their swelling behavior (volume swelling ratio) and mechanical properties (tensile strength, tensile strain). For in vivo investigations, the STEs were subperiosteally inserted for 4 weeks in dogs (n=5). Soft tissue expansion was clinically monitored. Histological analyses included the examination of alveolar bone underneath the expanders and thickness measurements of the surrounding fibrous capsule. Results: The volume swelling ratio of all STEs did not exceed 5.2. In tensile mode, the highest mean strain was registered for the L group ($98.03{\pm}0.3g/cm$), whereas the lowest mean value was obtained in the S group ($81.3{\pm}0.1g/cm$), which was a statistically significant difference (P<0.05). In addition, the S and L groups were significantly different in terms of tensile strength ($1.5{\pm}0.1g/cm$ for the S group and $2.2{\pm}0.1g/cm$ for the L group, P<0.05). Clinical monitoring showed successful dilatation of the soft tissues without signs of inflammation up to 28 days. The STEs remained volumetrically stable, with a mean diameter in vivo of 6.98 mm, close to the in vitro post-expansion findings (6.69 mm). Significant histological effects included highly vascularized collagen-rich fibrous encapsulation of the STEs, with a mean thickness of $0.67{\pm}0.12mm$. The bone reaction consisted of resorption underneath the STEs, while apposition was observed at their edges. Conclusions: The swelling and mechanical properties of the STEs enabled clinically successful soft tissue expansion. A tissue reaction consisting of fibrous capsule formation and bone loss were the main histological events.