• 제목/요약/키워드: Core composition

검색결과 499건 처리시간 0.047초

The Electromagnetic and Thermal Properties of the Mn-Zn Ferrite for the Power Line Communication

  • Lee, Hae-Yon;Kim, Hyun-Sik;Huh, Jeoung-Sub;Oh, Young-Woo
    • KIEE International Transactions on Electrophysics and Applications
    • /
    • 제12C권4호
    • /
    • pp.220-224
    • /
    • 2002
  • The electromagnetic properties and thermal behavior of Mn-Zn ferrite cores for the blocking filter of PLC application were investigated as the function of additives. The highest density and permeability were 4.98 g/㎤ and 8,221, respectively and were obtained to the specimen with composition of MnO 24 mol%, ZnO 25 mol% and Fe$_2$O$_3$51 mol%, added MoO$_3$ of 400 ppm, SiO$_2$ of 100 ppm, and CaO of 200 ppm. The uniform grains were organized, and the microstructures were compacted due to reduction of pores in the specimen. The permeability was increased up to 13,904 as the temperature of specimen increased to 110。C. However, it was decreased precipitously under 100 over 110。C. The exothermic behavior was observed in the frequency range from 1 kHz to 1 MHz, and the maximum temperature of specimen was 102。C at 1 MHz. In the consequence, the Mn-Zn ferrite core developed in this research will maintain the stable electromagnetic properties since the temperature of ferrite core rose to 93 。C in the range of 100 kHz to 450 kHz bandwidth qualified for PLC. The blocking filters were designed for single phase and three phases using the in-line and non-contact core. The best attenuation ratios of -46.46 dB and -73.9 dB were measured in the range of 100 kHz to 450 kHz bandwidth, respectively.

CuO를 첨가한 Mg-Zn 페라이트의 저온소결 특성에 관한 연구 (A Study on the Low-Temperature Sintering Characteristic of the Mg-Zn ferrite which added CuO)

  • 권오흥;김도환;최영지
    • 자원리싸이클링
    • /
    • 제14권3호
    • /
    • pp.63-67
    • /
    • 2005
  • 최근 고품위 TV 및 고정세도 디스플레이용으로 화상의 정세도를 향상시키기 위해 수평주파수를 높이려는 경향이 있어, 편향 요크용 페라이트 코아에는 고주파수 영역에 있어서도 코아로스가 낮은 재료가 요구되고 있는 실정이다. Mg-Zn 페라이트에 있어서 화학조성 및 프로세스가 미세구조에 미치는 영향에 착안하여 저온 소결화를 하였다. 저손실인 Mg-Zn계 te에 Cu에 첨가하였다. MgO, ZnO, Fe$_2O_3$, CuO를 선택한 후 조성비의 변화를 두며 CuO를 MgO로 치환하였다. 이 시료를 980$^{\circ}C$~1350$^{\circ}C$까지 3시간 소결하고, 투자율, 전력손실, 수축률, 코아로스를 측정하였다.

Mg-Zn Ferrites의 저온소결화 (Low Temperature Sintering Mg-Zn Ferrites)

  • 권오흥
    • 자원리싸이클링
    • /
    • 제12권6호
    • /
    • pp.8-12
    • /
    • 2003
  • 본 논문에서는 최근 고품위 TV 및 고정세도 디스플레이용으로 화상의 정세도를 향상시키기 위해 수평주파수를 높이려는 움직임이 있어, 편향 요크용 페라이트 코아에는 고주파수 영역에 있어서도 코아로스가 낮은 재료가 요구되고 있는 실정이다. Mg-Zn 페라이트에 있어서 화학조성 및 프로세스가 미세구조에 미치는 영향에 착안하여 저온 소결화를 하였다. 저손실인 Mg-Zn계 Ferrite에 Cu를 첨가하였다. MgO, ZnO, $Fe_2$$O_3$, CuO를 선택한 후 조성비의 변화를 두며 CuO를 MgO로 치환하였다. 이 시료를 $980∼1350^{\circ}C$까지 3시간 소결하였다. 측정은 투자율, 전력손실, 수축율, 코아로스를 측정하였다. 시료의 수축율을 개시하는 온도는 $900^{\circ}C$부근이며 Cu치환에 따라 수축율이 증가하였으며, Cu 치환에 따라 소성온도가 약 $-50∼-75^{\circ}C$ 낮아졌다.

Simulations of BEAVRS benchmark cycle 2 depletion with MCS/CTF coupling system

  • Yu, Jiankai;Lee, Hyunsuk;Kim, Hanjoo;Zhang, Peng;Lee, Deokjung
    • Nuclear Engineering and Technology
    • /
    • 제52권4호
    • /
    • pp.661-673
    • /
    • 2020
  • The quarter-core simulation of BEAVRS Cycle 2 depletion benchmark has been conducted using the MCS/CTF coupling system. MCS/CTF is a cycle-wise Picard iteration based inner-coupling code system, which couples sub-channel T/H (thermal/hydraulic) code CTF as a T/H solver in Monte Carlo neutron transport code MCS. This coupling code system has been previously applied in the BEAVRS benchmark Cycle 1 full-core simulation. The Cycle 2 depletion has been performed with T/H feedback based on the spent fuel materials composition pre-generated by the Cycle 1 depletion simulation using refueling capability of MCS code. Meanwhile, the MCS internal one-dimension T/H solver (MCS/TH1D) has been also applied in the simulation as the reference. In this paper, an analysis of the detailed criticality boron concentration and the axially integrated assembly-wise detector signals will be presented and compared with measured data based on the real operating physical conditions. Moreover, the MCS/CTF simulated results for neutronics and T/H parameters will be also compared to MCS/TH1D to figure out their difference, which proves the practical application of MCS into the BEAVRS benchmark two-cycle depletion simulations.

Occurrence of butyltin compounds in marine environment of Gwangyang Bay, Korea

  • Park, Hee-Gu;Kim, Sang-Soo;Moon, Hyo-Bang;Gu, Bon-Kyu
    • 한국환경과학회지
    • /
    • 제11권8호
    • /
    • pp.793-800
    • /
    • 2002
  • Butyltin (BT) compounds were measured in seawater, sediment, sediment core, settling solids, and plankton from Gwangyang Bay in 2001, Tributyltin (TBT) was detected in seawater from 1 out of the 7 seawater sampling sites and in sediment from 18 out of the 35 sediment sampling sites. The highest concentration of TBT was found in the sediment from the site near Yeosu Harbor (53 ng Sn/g dry wt), acting as the point source for TBT The mean concentrations of TBT were in the order of plankton> settling solids> sediment. The degradation indexes ([DBT]+[MBT]/[TBT]) for the plankton were less than 1, indicating the possibility of recent inputs of TBT. The indexes for the sediment and settling solids ranged from 1.14 to 8.73. The composition of the BT compounds found in the settling solids was similar to that found in the sediment. The vertical profile of the total BT compounds in the sediment was characterized by an abrupt decline from the surface. However, no butyltin compounds appeared below a depth of 10 cm, corresponding to the 1980s. Accordingly, the current results demonstrated that the levels of all butyltin species in the environment of Gwangyang Bay were relatively lower than those in other polluted coastal areas. The vertical profile also suggested a fairly recent history for the down-core.

Effects of Pruning Season on Compartmentalization of Pruning Wounds in Acer palmatum and Pinus strobus

  • Lee, Kyu-Hwa;Lee, Kyung-Joon
    • 한국산림과학회지
    • /
    • 제99권2호
    • /
    • pp.226-234
    • /
    • 2010
  • This study was conducted to examine the effects of pruning season on the compartmentalization of pruning wounds in Acer palmatum and Pinus strobus. A total of eighty five field-grown trees for each species were allocated to five different seasons, early- and late-winter, mid-spring, mid- and late-summer, for pruning treatments. Wound closure rate (WCR) of the two species for one year after treatment, area of discolored stem tissue on the medial longitudinal surface and cambial dieback length under the pruning wound of A. palmatum were measured. Changes of total phenols and variations of extractives, holocellulose and lignin at the treated branch unions were examined. In WCR of A. palmatum, late-winter (March, 39.8%) and mid-spring (May, 39.7%) were higher than any other seasons, while early-winter (November, 28.4%) was significantly lower than late-winter and mid-spring. P. strobus showed similar results with A. palmatum. The WCR of early-winter (57.2%) was the lowest significantly among the five seasons, and mid-spring (73.5%) and late-winter (71.4%) showed higher a WCR than other seasons. In the discolored/wound area ratio of A. palmatum, early-winter (73.2%) was the highest by far, and mid- (July) and latesummer (September, 36.7%, respectively) were the lowest among the five seasons. In the length of cambial dieback, two dormant seasons, early- and late-winter were longer than any other seasons. Phenol contents at the treated branch union were changed in line with the seasonal fluctuation of the tree. Total phenols in the below core of the treated union were higher than those of the branch union with living branch, while little differences were seen in the above core. At the branch core of the treated union, phenols of A. palmatum decreased one month after the treatments, but P. strobus maintained similar to or a little higher than those at the controls. The major changes in chemical composition at pruning wounds were extractives and lignin increased by less than 20% in A. palmatum, while extractives in P. strobus remarkably increased by 70%.

극박형 Fe-Al-Nb-B-Cu계 초미세결정합금의 자기적 특성 (The Magnetic Properties of Ultrathin Fe-Al-Nb-B-Cu Nanocrystalline Alloys)

  • 박진영;서수정;김광윤;노태환
    • 한국자기학회지
    • /
    • 제6권4호
    • /
    • pp.211-217
    • /
    • 1996
  • Fe-B-Nb-Cu계 초미세결정합금의 고주파수 대역에서의 연자기 특성을 개선하기 위하여, 이 합금에 대한 Al 첨가효과 및 적정 Al 함유합금을 $10\;\mu\textrm{m}$ 이하의 두께를 가진 극박형으로 만들었을 때의 자기적 특성이 조사되었다. 그 결과 $Fe_{78}Al_{4}Nb_{5}B_{12}Cu_{1}$ 조성합금의 경우에 100 kHz 이상의 고주파 영역에서 높은 실효투자율과 낮은 자심손실 값을 나타내었다. 또 이 합금을 두께 $10\;\mu\textrm{m}$ 이하로 극박화한 경우 1 MHz영역까지의 실효투자율 및 자심손실 특성이 크게 개선되었다. 즉, 두께 $8\;\mu\textrm{m}$$Fe_{78}Al_{4}Nb_{5}B_{12}Cu_{1}$ 합금의 1 MHz에서의 실효 투자율은 5,000이었으며, 자심손실은 1 MHz, 0.2 T에서 1.4 kW/kg의 값을 보였다. 이러한 우수한 연자기 특성은 Al 첨가에 의해 자구구조의 변화 및 10 nm 이하의 보다 미세한 $\alpha-Fe$상 생성등에 기인하는 것으로 해석되었다.

  • PDF

제주도 청수공 시추코아에서 산출된 플라이스토세 포자·화분화석의 화분층서 및 고기후적 의미 (Palynostratigraphic and paleoclimatic implications of the Pleistocene Cheongsu Core sediments, Jeju Island, Korea)

  • 문병찬;정철환
    • 한국지구과학회지
    • /
    • 제26권3호
    • /
    • pp.276-282
    • /
    • 2005
  • 제주도 청수공에서 산출된 포자$\cdot$화분화석군은 낙엽활엽수와 초본류가 주종을 이루고 있으며 풍부하게 산출되는 종류로는 소나무과, 오리나무속, 밤나무속/구실잣밤나무속, 느릅나무속/느티나무속, 명아주과 및 국화과 등이다. 전체적인 식생 조성에 근거하여 2개의 화분 분대를 설정하였다. 하부의 Zone I에서는 오리나무속, 명아주과 등이 우세하며 전반적으로 초본류가 풍부하게 나타난다. 상부의 Zone II에서는 전나무속, 낙우송과-측백과-주목과, 느릅나무속/느티나무속, 벼과 등이 풍부하게 나타나며, 낙엽활엽수가 상대적으로 우세하게 산출된다. 청수공의 포자$\cdot$화분화석군은 그 조성에 있어 중국의 동지나해 대륙붕에서 설정된 Alnipollenites(Alnus)-Chenopodipollis(Chenopodiaceae)-Compositae 군집대와 잘 대비되며 그 지질시대는 Pleistocene으로 해석된다. 오늘날 식생분포와의 비교 및 우세종의 생태학적 분석을 통하여 청수공 코아는 한랭한 온대 기후 하에서 형성되었으며 당시의 제주도에는 오늘날의 한라산과 같은 지형적 기복은 아직 발달하지 않았던 것으로 보인다.

몽골 북부 흡수굴호의 홀로세 동안의 고환경 변화 (Holocene paleoenvironmental changes in the Lake Khuvsgul, Northern Mongolia)

  • 어르헌셀렌게;카시와야;오치아이;크리워너거브;나카무라
    • 한국제4기학회지
    • /
    • 제22권1호
    • /
    • pp.28-36
    • /
    • 2008
  • The present study has focused on the environmental changes and evidences for sedimentation in the Lake Khuvsgul catchment during the Holocene period, inferred from short core sediment (BO03) from the eastern shore of Borsog Bay, which were analyzed in order to review records of the Holocene climatic evolution and Holocene history in Northern Mongolia. For the purpose of reconstruction of natural phenomenon that occurred in the lake catchment system during the Holocene, physical and chemical properties including HCl-soluble material, biogenic silica, organic matter and grain size distribution of minerals in the core sediments have been analyzed in this study. The vertical variations in composition for these properties show distinctly that five lines of paleoenvironmental evidence occurred in the lake catchment during the Holocene. A modified age model resulting from AMS carbon dating for the BO03 core sediment shows timings of these environmental events at 9.5 Kyr BP, 8.0 Kyr BP, 5.6 Kyr BP and 3.2 Kyr BP, respectively. Paleoenvironmental changes in the Lake Khuvsgul catchment system during the Holocene highlight distinctive features of the hydrological regime and geomorphologic evolution in the lake catchment due to regional landscape and global climatic changes corresponding with the Holocene optimum and thermal optimum. In particular, the change of hydrologic regime based on the sedimentological evidence has been caused by not only overland flow due to melting water, but also base flow due to thick permafrost around Khuvsgul region.

  • PDF

In Vitro Formation of Protein Nanoparticle Using Recombinant Human Ferritin H and L Chains Produced from E. coli

  • RO HYEON SU;PARK HYUN KYU;KIM MIN GON;CHUNG BONG HYUN
    • Journal of Microbiology and Biotechnology
    • /
    • 제15권2호
    • /
    • pp.254-258
    • /
    • 2005
  • We have conducted in vitro reconstitution study of ferritin from its subunits FerH and FerL. For the reconstitution, FerH was produced from an expression vector construct in Escherichia coli and was purified from a heat treated cell extract by using one-step column chromatography. FerL was expressed as inclusion bodies. The denatured form of FerL was obtained by a simple washing step of the inclusion bodies with 3 M urea. The reconstitution experiment was conducted with various molar ratios of urea-denatured FerH and FerL to make the ferritin nanoparticle with a controlled composition of FerH and FerL. SDS-PAGE analysis of the reconstituted ferritins revealed that the reconstitution required the presence of more than 40 molar$\%$ of FerH in the reconstitution mixture. The assembly of the subunits into the ferritin nanoparticle was confmned by the presence of spherical particles with diameter of 10 nm by the atomic force microscopic image. Further analysis of the particles by using a transmission electron microscope revealed that the reconstituted particles exhibited different percentages of population with dense iron core. The reconstituted ferritin nanoparticles made with molar ratios of [FerH]/[FerL]=l00/0 and 60/40 showed that 80 to $90\%$ of the particles were apoferritin, devoid of iron core. On the contrary, all the particles formed with [FerH]/[FerL]=85/ 15 were found to contain the iron core. This suggests that although FerH can uptake iron, a minor portion of FerL, not exceeding $40\%$ at most, is required to deposit iron inside the particle.