• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.859-862
• /
• 2002

The Core Support Barrel (CSB) is a major component of Reactor Internals, and is designed to support and protect the Reactor Core. In this study, Reactor Core, Core Shroud and CSB were simplified to coaxial cylinders and then the offset of Reactor Core & Core Shroud to the dynamic characteristic of CSB was analyzed. For the beam modes, natural frequencies of the cantilevered cylinder are compared with those of the cantilevered beam. And it was found out that shear modulus must be used correctly to convert the shell model to the equivalent beam model. From the dynamic characteristics of the beam model, it was found out that natural frequencies are proportional to the length of Reactor Core & Core Shroud and inversely proportional to the mass. From the comparison with the dynamic characteristics of a beam model and a lumped-mass model it was found out that the size of lumped-mass must be determined considering both the length and the mass of Reactor Core & Core Shroud.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3528-3542
• /
• 2021

A detailed geometrical model of a Krško reactor core was developed using a Monte Carlo neutron transport code MCNP. The main goal of developing an MCNP core model is for it to be used in future research focused on ex-core calculations. A script called McCord was developed to generate MCNP input for an arbitrary fuel cycle configuration from the diffusion based core design package CORD-2, taking advantage of already available material and temperature data obtained in the nuclear core design process. The core model was used to calculate 3D power density profile inside the core. The applicability of the calculated power density distributions was tested by comparison to the CORD-2 calculations, which is regularly used for the nuclear core design calculation verification of the Krško core. For the hot zero power and hot full power states differences between MCNP and CORD-2 in the radial power density profile were <3%. When studying axial power density profiles the differences in axial offset were less than 2.3% for hot full power condition. To further confirm the applicability of the developed model, the measurements with in-core neutron detectors were compared to the calculations, where differences of 5% were observed.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.134-140
• /
• 2017

A well-performed core power control to track load changes is crucial in pressurized water reactor (PWR) nuclear power stations. It is challenging to keep the core power stable at the desired value within acceptable error bands for the safety demands of the PWR due to the sensitivity of nuclear reactors. In this paper, a state-space model predictive control (MPC) method was applied to the control of the core power. The model for core power control was based on mathematical models of the reactor core, the MPC model, and quadratic programming (QP). The mathematical models of the reactor core were based on neutron dynamic models, thermal hydraulic models, and reactivity models. The MPC model was presented in state-space model form, and QP was introduced for optimization solution under system constraints. Simulations of the proposed state-space MPC control system in PWR were designed for control performance analysis, and the simulation results manifest the effectiveness and the good performance of the proposed control method for core power control.

• 한국응급구조학회지
• /
• 제14권2호
• /
• pp.25-40
• /
• 2010

Purpose : The purpose of this study was to develop and apply a Core Skill-TLP(Core Skill-Tutorial, Laboratory, Practicum) package in Patient Management and to effect of core skill-TLP education. Methods : This study was used to developed Patient Management' Core Skill-TLP package throughout 14 steps of Core Skill-TLP package development model. Then, Core Skill-TLP Learning methodology was implemented in first year student in the undergraduate emergency medical technology, and survey was done. Results : 1. Core Skill-TLP package model was presented based on conceptual model of PBL(S-PBL). 2, The student in OSCE did significantly better in clinical patient management core skills performance. 3. As to the satisfaction of Core Skill-TLP package management, student, tutor and self-satisfaction score was 3.21, 3.42, 3.38 respectively. Conclusion : This study was suggested that Core Skill-TLP education would be necessary with well-structured package and achieved advantage of simulation and PBL.

• 한국컴퓨터정보학회논문지
• /
• 제24권1호
• /
• pp.197-206
• /
• 2019

The purpose of this study is to develop and validate a model for diagnosing core competencies at the higher education level. Based on literature reviews, a potential model for core competencies at university was suggested. A tool for validating the model was composed of 24 items, which were delivered to 226 professors and administrative staffs, 730 students, and 134 graduates & external industrial experts. Five constructs (core competencies) were extracted from the data collected among professors and administrative staff responding to the importance of the items. The results of importance and performance surveys on core competencies with students were respectively 3.28 to 3.66 and 2.68 to 3.28 (4-point Likert scale). Statistical differences between importance level and performance level were found in all the sub-categories of core competencies. Borich priority determination formula and Locus for Focus Model were used for the determination of the priority of needs. Importance survey among graduates and external experts showed that the mean of each items ranged from 2.80 to 3.76 (4-point Likert scale). The overall results of the analyses suggest that the final model is appropriate for measuring the core competencies.

• 대한간호학회지
• /
• 제43권6호
• /
• pp.714-725
• /
• 2013

Purpose: This study was done to provide fundamental data for the development of competency reinforcement programs to prevent addictive behavior in adolescents through the construction and examination of an addiction prevention core competency model. Methods: In this study core competencies for preventing addictive behavior in adolescents through competency modeling were identified, and the addiction prevention core competency model was developed. It was validated methodologically. Results: Competencies for preventing addictive behavior in adolescents as defined by the addiction prevention core competency model are as follows: positive self-worth, self-control skill, time management skill, reality perception skill, risk coping skill, and positive communication with parents and with peers or social group. After construction, concurrent cross validation of the addiction prevention core competency model showed that this model was appropriate. Conclusion: The study results indicate that the addiction prevention core competency model for the prevention of addictive behavior in adolescents through competency modeling can be used as a foundation for an integral approach to enhance adolescent is used as an adjective and prevent addictive behavior. This approach can be a school-centered, cost-efficient strategy which not only reduces addictive behavior in adolescents, but also improves the quality of their resources.

• 대한치과보철학회지
• /
• 제41권5호
• /
• pp.582-595
• /
• 2003

Statement of problem : Most posts are metallic, but in response to the need for a post that possesses optical properties compatible with an all-ceramic crown. an esthetic post has been developed. Although there have been many studies about the esthetic post materials, 3-dimensional finite element studies about the stress distribution of them are in rare. Purpose : The purpose of this study is to investigate comparatively the distribution of stresses of the restored, endodontically treated maxillary incisors with the esthetic post materials and the displacement on the cement layer on simulated occlusal loading by using a 3-dimensional finite element analysis model. Material and method : Four 3-dimensional finite element models were constructed in a view of a maxillary central incisor, a post, a core, and the supporting tissues to investigate the stresses in various esthetic posts and cores and the displacement on the cement layer (Model 1 ; Cast gold post and core, Model 2 ; Glass fiber post with composite core, Model 3 ; Zirconia post with composite core. Model 4 ; Zirconia post with ceramic core). Force of 300N was applied to the incisal edge and the cingulum (centric stop point) with the angle of 135-degree to the long axis of the tooth. Results : 1. The stresses and displacement on the incisal edge were higher than on the cingulum 2. The stresses in dentin were the highest in Model 2 (Glass fiber post with composite core), and the second was Model 3, the third Model 1, and the lowest Model 4. 3. The stresses in post and core were the highest in Model 4 (Zirconia post with ceramic core), and the second was Model 1, the third Model 3, and the lowest Model 2. 4. The displacement on the cement layer was the highest in Model 2 (Glass fiber post with composite core), and the second was Model 3, the third Model 1, and the lowest Model 4. Conclusion : When a functional maximum bite force was applied, the distribution of stresses or the esthetic post and core materials and the displacement on the cement layer were a little different. It seems that restoring extensively damaged incisors with esthetic post and core materials would be decided according to the remaining tooth structure.

• Steel and Composite Structures
• /
• 제45권3호
• /
• pp.467-482
• /
• 2022

One of the major failure modes in composite sandwich structures is the separation between skins and core. In this study, the effect of employing foam filled composite corrugated core on the skin/core debonding (resistance to separation between skin and core) is investigated both experimentally and numerically. To this aim, triangular corrugated core specimens are manufactured and compared with reference specimens only made of PVC foam core in terms of skin/core debonding under bending loading. The corrugated composite laminates are fabricated using the hand layup method. Also, the Vacuumed Infusion Process (VIP) is employed to join the skins to the core with greater quality. Utilizing an End Notched Shear (ENS) fixture, three point bending tests are performed on the manufactured sandwich composite panels. The results reveal that the resistance to separation capacity and flexural stiffness of sandwich composite has been increased about 170% and 76%, respectively by using a triangular corrugated core. The Cohesive Zone Model (CZM) with appropriate cohesive law in ABAQUS finite element software is used to model the progressive face/core interfaces debonding the difference between experimental and numerical results in predicting the maximum born load before the skin/core separation is about 6 % in simple core specimens and 3% in triangular corrugated core specimens.

• 한국주거학회논문집
• /
• 제24권1호
• /
• pp.1-10
• /
• 2013

Number of children cared by child care centers has getting up almost half of the from zero to five year age group in korea. Home care children' activities are reported more active and natural than those of center care children. So this study seek the design guidelines for the residential core model of child care centers as second home in korea. The residential core model by Anita Lui Olds was selected and ten domestic center cases were surveyed for guidelines. Firstly, daily-residential core model is learning by daily life at home, and is equiped with cooking kitchenet and group activity area in group room. Secondly, play-residental core model is learning by playing by self, and is equiped with acting, eating and reading common area clustering two or three group room. Thirdly, eco-residental core model is learning by eco-friendly activities, and is equiped with companying, cooperating and sharing area. Fourthly, project-residental core model is learning by project by self, and is equiped with drawing, experimenting and presenting common area. Fifthly, the space of residential core model is organized with three or four group room and clustering living or common area. The larger the center is, the more the cluster is vertically. Facility area and outdoor playground per child is about 7 and $3m^2$.

• Steel and Composite Structures
• /
• 제17권2호
• /
• pp.159-172
• /
• 2014

A finite element model with the consideration of damage initiation and evolution has been developed for the analysis of the dynamic response of a composite sandwich panel subject to low velocity impact. Typical damage modes including fiber breakage, matrix crushing and cracking, delamination and core crushing are considered in this model. Strain-based Hashin failure criteria with stiffness degradation mechanism are used in predicting the initiation and evolution of intra-laminar damage modes by self-developed VUMAT subroutine. Zero-thickness cohesive elements are adopted along the interface regions between the facesheets and the foam core to simulate the initiation and propagation of delamination. A crushable foam core model with volumetric hardening rule is used to simulate the mechanical behavior of foam core material at the plastic state. The time history curves of contact force and the core collapse area are obtained. They all show a good correlation with the experimental data.