• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.187-194
• /
• 2004

The surface flames in porous ceramic burner are experimentally characterized to investigate the effects of equivalence ratio and firing rates. The results show that the surface flames are classified into green, red radiant and blue surface flame as the decrease of equivalence ratio. And each flame is maintained very stable and represents the same flame characteristics at any orientation of ceramic burner. Particularly the blue surface flame is found to be very stable at very lean equivalence ratio at 7000kcal/hr to 20000kcal/hr firing rates. And the exhausted NOx was analysed to find out which flame has lower NOx emission. The blue surface flame shows the lowest NOx emission regardless of the location of burner since it sustains very stable at lean mixture ratio.

• 한국세라믹학회지
• /
• 제26권5호
• /
• pp.593-600
• /
• 1989

Fine spinel powder was prepared from the Mg-Al double alkoxide synthesized using magnesium powder, aluminum foil and sec-butyl alcohol. This powder was compared with powder prepared by mixing two commercial alkoxides. The spinelization was started at 50$0^{\circ}C$ and was almost completed at 100$0^{\circ}C$ with a good crystallinity in the double alkoxide system. In mixed alkoxide system, homogeneous spinel powder was not obtained and MgO existed as a second phase because of solubility and hydrolysis rate differences of two alkoxides. The relative density of specimen prepared by double alkoxide was 99% and specimen prepared by mixed alkoxide was 95%. The modulus of rupture of specimens prepared by double alkoxide and mixed alkoxide was 49.9kg/$\textrm{mm}^2$ and 41.6kg/$\textrm{mm}^2$, respectively.

• 한국연소학회지
• /
• 제10권1호
• /
• pp.7-12
• /
• 2005

The surface flames in perforated ceramic burner are experimentally characterized to investigate the effects of equivalence ratio and heating rate. The results show that the surface flames are classified into green, red radiant and blue surface flame as the decrease of equivalence ratio. Each flame is maintained very stable at the specified equivalence ratio and represents the same flame characteristics at any orientation of ceramic burner. Particularly the blue surface flame is found to be very stable at very lean equivalence ratio at 7000kcal/hr to 20000kcal/hr heating rates. And the exhausted NOx measurement shows that blue surface flame represents the lowest NOx emission regardless of the location of burner since it sustains very stable at lean mixture ratio.

• 한국세라믹학회지
• /
• 제23권6호
• /
• pp.59-65
• /
• 1986

Flexural strength fracture toughness and strengthening mechanisms of cordierite ceramics reinforced by SiC whiskers up to 40vol% were investigated. The specimens were hot pressed at Ar atmosphere. The porosity increased with the SiC whisker content. Flexural strength and single edge notch beam fracture toughness were measured up to 1,000$^{\circ}C$. Extrapolating to zero porosity the reinforced composites exhibited in-creasings in flexural strength and fracture toughness with the SiC whisker content. The composites were strengthened mainly by load transfer crack impediment and partially by crack deflection mechanisms. Impurities played an important role in determining the mechanical properties of the composites.

• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1137-1143
• /
• 2001

본 연구에서는 적외선 반사체 제조를 위하여 MAS(MgO-Al$_2$O$_3$-SiO$_2$)계 유리로부터 핵행성 및 결정성장의 2단계 열처리에 의해 cordierite(2MgO.2Al$_2$O$_3$5SiO$_2$)와 rutile(TiO$_2$)을 주결정상으로 하는 결정화유리를 제조하였다. MgO-Al$_2$O$_3$-SiO$_2$3성분계 조성에 조핵제로 TiO$_2$를 첨가하여 용융법으로 유리를 제조한 후 결정화 열처리를 하여 핵생성 및 결정화 거동과 결정화유리의 결정상, 입자 크기와 확산 반사율과의 관계를 관찰하였다. 그 결과 75$0^{\circ}C$에서 3시간동안 핵생성 시킨 후 110$0^{\circ}C$/5hr 이상의 열처리 조건에서 cordierite와 rutile이 주결정상으로 석출되었으며 570~2500nm 범위에서 90% 이상의 반사율을 갖는 결정화유리를 제조하였다.

• 한국결정성장학회지
• /
• 제30권1호
• /
• pp.27-32
• /
• 2020

점토, 규석, 장석을 사용하여 만든 전통생활도자기는 주 결정상이 mullite와 cristobalite이다. Mullite 결정은 제품의 강도를 좋게 하지만 열팽창계수가 5.3 × 10^-6/℃로 비교적 커서 내열 도자기로는 사용할 수 없다. 본 연구에서는 산청토와 장수곱돌 sludge를 사용하여 도자기 내에 mullite 결정 대신 열팽창 계수가 2.6 × 10^-6/℃인 cordierite 결정이 생성되게 함으로써 가벼운 내열 도자기를 개발하고자 하였다. 그 결과 산청토 80 wt%, 장수곱돌 sludge 20 wt%를 사용하여 만든 도자기가 내열성이 좋고 강도와 하중연화도 우수하였으며, 부피비중도 1.7 8로 기존의 분청사기보다 가벼웠다.

• 한국세라믹학회지
• /
• 제45권2호
• /
• pp.132-137
• /
• 2008

The main purpose of this study is enhancing the filtering efficiency, performance and durability of filter by growing SiC whiskers on cordierite honeycomb substrate. The experiment was performed by Chemical Vapor Infiltration (CVI) in order to control pore morphology of substrate. Increasing the mechanical strength of porous substrate is one of important issues. The formation of "networking structure" in the pore of porous substrate increased mechanical strength. The high pressure gas injection to the specimen showed that a little of whiskers were separated from substrate but additional film coating enhanced the stability of whisker at high pressure gas injection. Particle trap test was performed. More nano-particle was trapped by whisker growth at the pore of substrate. Therefore it is expected that the porous cordierite which deposited the SiC whisker will be the promising material for the application as filter trapping the nano-particles.

• 한국세라믹학회지
• /
• 제27권7호
• /
• pp.899-906
• /
• 1990

The cordierite powders were prepared from Mg(NO3)2.6H2O, Al(NO3)3.9H2O and colloidal silica by the coprecippitation method, and the sintering behavior of the powders were investigated. Two different methods were applied for producing the precursor powders. The one was to added the aqueous solution of Mg(NO3)2.6H2O and Al(NO3)3.9H2O to NH4OH to adjust pH at 10 where the colloidal silica of pH 10 was added. The other wa to add the aqueous solution of Mg(NO3)2.6H2O and Al(NO3)3.9H2O to the colloidal silica with NH4OH to control the final mixture to be at pH 10. It was confirmed that more homogeneous powders were obtained from the latter method. The firing linear shrinkage of the powder compacts fabricated from the calcined powder between 90$0^{\circ}C$ and 110$0^{\circ}C$ was found to be larger as the calcination temperature was low. But all of them stopped shrinking around 120$0^{\circ}C$. The powder compacts, fabricated using the calcined powders at 90$0^{\circ}C$ and 95$0^{\circ}C$ for 2hours and sintered at 142$0^{\circ}C$ for 2hours, showed relative density of 93-96%, 3-point bending strength of 81-83MPa, KIC of 1.9-2.4 MPam1/2 and thermal expansion coefficient of 0.213-0.732$\times$10-6$^{\circ}C$.

• 한국세라믹학회지
• /
• 제29권10호
• /
• pp.827-835
• /
• 1992

The effects of CeO2 on the properties of cordierite-based glass-ceramics and its applicability to low firing temperature substrate were examined. Glass-ceramics were prepared by sintering the glass powder compacts at 900~100$0^{\circ}C$ for 3 h. Density, bending strength, dielectric constant and thermal expansion coefficient of the glass-ceramics were measured as functions of CeO2 contents and sintering temperatures. By adding CeO2, dense glass-ceramics were obtained below 100$0^{\circ}C$. dielectric constant and bending strength were more dependent on the porosity of glass-ceramics containing 5 wt% CeO2, sintered at 100$0^{\circ}C$ for 3 h, were as follows; relative density is 95.3%, bending strength is 178$\pm$11 MPa, dielectric constant is 4.98$\pm$0.20 (at 1 MHz) and thermal expansion coefficient is 33.7$\times$10-7/$^{\circ}C$. Therefore, the glass-ceramics containing 5 wt% CeO2 appeared to be suitable for low firing temperature substrate of electronic devices.

• 한국결정성장학회지
• /
• 제28권1호
• /
• pp.38-43
• /
• 2018

수처리에 사용되는 세라믹 분리막은 친환경적이고 낮은 에너지 소비 등의 장점으로 인해 많이 사용되고 있으나, 40 % 이상의 높은 기공률로 인해 수처리 모듈에 적용되는 과정에서 강도에 대한 문제가 발생할 수 있다. 이러한 문제를 해결하기 위해 도자기에 사용되는 유약을 이용하여 분리막 끝단의 강도를 향상시키고자 하였다. 분리막의 미세구조 변형을 최소화하기 위하여 낮은 소성온도에서 사용되는 저온용 유약 조성 4가지를 선정하였다. 저온용 유약을 이용하여 코팅 후 열팽창 계수 차이로 크랙 발생이 관찰되었다. 따라서 유약의 열팽창 계수를 cordierite와 petalite를 첨가하여 제어하였다. 코팅 후 세라믹 분리막의 압축강도는 $27N/m^2$에서 $117N/m^2$ 증가하였으며, 이는 깨지기 쉬운 세라믹 분리막의 단점을 충분히 보완할 수 있을 것으로 판단된다.