• Journal of Environmental Health Sciences
• /
• v.1 no.1
• /
• pp.21-27
• /
• 1974

This work was carried out to investigate the chemical properties of the chelate compounds which were produced with 2-methoxy-5-nitrophenol(MNG) and metal salt such as copper nitrate and manganese nitrate. And obtained results were as in the followings. 1) The binding ratio of the chelate compounds formation were determined by using the molar ratio concentration method and their chemical structures were identified by IR-spectrum. 2) In the absorbance measuring, 2-methoxy-5-nitrophenol coordinated with manganese and copper showed the maximum absorbance at $430 m\mu$ and $410 m\mu$ respectively. 3) The binding ratio of chelated compounds were measured by molar ratio method and continuous variation method with spectrophotometer, which was identified as 1:2. 4) The conditional formation constant(log Kn value) of manganese and copper chelate compounds were 6.70, 6.75, respectively according to the equation of $log\frac{A-AM\circ n MNG}{AMm MNG-A}=n log (M\circ)+log Kn$ 5) The dissociations degree of manganese and copper chelate compound were $2, 300{\times} 10^{-7}$, $2, 346{\times} 10^{-7}$ respectively according to the molar calculation method.

• Journal of Welding and Joining
• /
• v.13 no.3
• /
• pp.55-64
• /
• 1995

Metallizing method on ceramic surface is one of the compositing technology of ceramics and metal. The purpose of this study is to make HIC (Hybrid Intergrated Circuit) with copper metallizing method of which copper layer is formed on ceramic substrate by firing in atmosphere in lieu of conventional hybrid microcircuit systems based on noble metal. Metallizing pastes were made from various copper compounds such as Cu$_{2}$O, CuO, Cu, CuS and kaolin. And the screen printing method was used. The characteristics of metallized copper layers were analyzed through the measurement of sheet resistance, SEM, and EDZX. The results obtainted are summarized as follows; 1. The copper metallizing layers on ceramic surface can be formed by firing in air. 2. The metallized layer using Cu$_{2}$O paste showed the smallest sheet resistance among a group of copper chemical compounds. And optimum metallizing conditions are 15 minutes of firing time, 1000.deg.C of firig temperature, and 3 minutes of deoxidation time. 3. The results of EDAX analysis showed mutual diffusion of Cu and Al. 4. The kaolin plays a important role of deepening the penetration of Cu to $Al_{2}$O$_{3}$ ceramics. But if the kaolin content is too much, sheet resistance increases and copper metallizing layer becomes brittle.

• Environmental Analysis Health and Toxicology
• /
• v.5 no.1_2
• /
• pp.51-55
• /
• 1990

The ultimate Wastes generated after being treated safely and properly were land-filled in Wha Sung Treatment Plant, that of specific hazardous Wastes. There are three kinds of wastes being landfilled, which are sludges, ashes, and solidificated wastes with cement. This research scrutinizes the variations of leachate which originated from landfilled wastes amount to 30,000 ton with analizing the constituent, pH and concentration of wastes once per month since september, 1987. Now, we have some conclusions as followings; 1. The longer retention time of wastes in landfill site and the more quantity of filling-up, the closer pH of leachate to alkalinity. 2. As the quantity of copper and its compounds is over 90 percent of constituents loundfilled wastes, so the copper of leachate goes above treatment criteria. 3. There lis relationship between pH of leachate and eruption of copper and its compounds. The higher pH of leachate, the more secured copper and its compounds. So, we learn that solidificated wastes with cement is more secured than sludges and ashes. 4. The pH and concentration of copper in leachate is low in July and August, this is passing phenomenon which diluted by rainfall in rainy days. 5. The quantities of cadmium and lead of leachate was not over the treatment criteria.

• BMB Reports
• /
• v.32 no.4
• /
• pp.350-357
• /
• 1999

At concentrations of 1 mM, the protective effects of carnosine and related compounds including anserine, homocarnosine, histidine, ${\beta}$-alanine were investigated against copper-catalyzed oxidative damage to deoxyribose, ascorbic acid, human serum albumin, liposome, and erythrocytes. Carnosine and anserine reduced Cu (II) to bathocuproine-reactive Cu (I) in a time- a and a dose-dependent manner while the others did not. Carnosine reduced 86% of $100\;{\mu}M$ Cu (II) in 60 min. Carnosine, homocarnosine, anserine, and histidine inhibited copper-catalyzed deoxyribose degradation by 75, 66, 65, and 45%, respectively. In the presence of $1\;{\mu}M$ Cu (II), carnosine and related compounds inhibited ascorbic acid oxidation by 55-85% after incubation for 20 min. In the presence of 0.15 mM ascorbic acid and 0.8 mM $H_2O_2$, carnosine, anserine, homocarnosine, and histidine inhibited copper-catalyzed oxidation of human serum albumin by 41, 21, 29, and 24%, respectively, as determined by carbonyl formation. These compounds also significantly inhibited copper-catalyzed liposomal lipid peroxidation as measured by malondialehyde and lipid hydroperoxides. Carnosine, anserine, homocarnosine, and histidine inhibited hemolysis of bovine erythrocytes induced by 0.1 mM Cu (II). These results suggest that histidine-containing dipeptides may play an important role in protecting against free radical-mediated tissue damage.

• Journal of Environmental Science International
• /
• v.17 no.9
• /
• pp.981-992
• /
• 2008

This study examined how to produce new methods of copper (II) sulfate crystallization by using a small-scale chemistry tool such as small-scale reaction surface and petri dish. The making of copper(II) sulfate is included in the 5th grade elementary science textbooks. Various copper(II) compounds were reacted with a 2 M sulfuric acid solution. The result of this study is as follows: Seven small amounts of copper(II) compounds were reacted with a few drops of 2 M sulfuric acid solution at room temperature to make a copper(II) sulfate crystal of triclinic shape. Using the petri dish method, a copper(II) sulfate crystal could be identified within one hour of reacting copper(II) hydroxide, copper(II) carbonate, copper(II) nitrate, copper(II) perchlorate, cupric(II) formate from a few drops of 2 M sulfuric acid solution at room temperature. When using the lap top method for copper(II) perchlorate, cupric formate, a proper crystal could be identified within one hour as well. SSC methods were used for the first time to make a copper sulfate crystal via chemical reaction. We can make a copper(II) sulfate crystal using a simple method which is easier, safer and saves time in class. And since a small quantity of chemicals are being used in SSC chemical methods, waste is greatly reduced. This lessens the amount of environmental problems caused by the experiment. This can be helpful in preserving nature. In addition the cost of chemical and laboratory equipment is greatly reduced because it uses material that we find in our daily lives. There will be continued study of small-scale methods such as improvement of new programs, study and training of teachers, and securing SSC tools. I would like to suggest such as SSC methods are applicable in elementary School Science. I would like it to become a wide spread program.

• Journal of the Korean Vacuum Society
• /
• v.15 no.5
• /
• pp.485-492
• /
• 2006

Two new copper(I) complexes with organic ligands, $[Cu^I(hfac)]_2(DVTMSO)$ and $[Cu^I(hfac)]_2(HD)$ (hfac=hexafluoroacetylacetonate, DVTMSO=1,2-divinylte-tramethyl-disiloxane, HD=1,5-hexadiene) were synthesized and used for copper metal-organic chemical vapor deposition. In these compounds, two Cu(hfac) fragments are bonded by one neutral ligand forming unusual structure with respect to other Cu(I) complexes. The compounds exhibited relatively high volatility and stability when compared to other copper(I) precursors. By using the reported compounds as precursors, a continuous Cu layer was not formed but the Cu islands were only observed. And the shape and size of Cu islands are significantly changed as a function of the substrate temperature.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.431-434
• /
• 1998

Layered basic copper acetate, $Cu(OH)(CH_3COO){cdot}H_2O$ was synthesized. Intercalation compounds of alkyl sulfonates into layered basic copper acetate have been synthesized via anionic exchange. From the X-ray diffraction data and the alkyl sulfonate size, the orientation of the intercalated alkyl sulfonate into layered basic copper acetate was determined.

• Journal of Environmental Health Sciences
• /
• v.23 no.2
• /
• pp.1-11
• /
• 1997

The synthesis of phospholipid and the composition of fatty acid in B. subtills treated with copper chloride (10 ppm), manganese chloride (100 ppm), and nickel chloride (50 ppm) during the culture were analyzed to compare with the control. The levels of growth, total lipid, phosphatidylethanolamine(PE), phosphatidylcholine(PC), phosphatidylglycerol(PG), and cardiolipin(CL) in B. subtilis treated with copper chloride were decreased predominantly. But, the biosynthesis of phosphatidylinositol(PI) was not affected by the metal compounds. The major fatty acids utilized for the formation of phospholipid were palmitic acid(average 19.00%) and stearic acid(average 9.88%) in the control. In the copper chloride treatment, however, palmitic acid (average 17.35%) and oleic acid(average 15.99%) made use of the major fatty acid during the biosynthesis of phospholipids. It was showed that oleic acid(average 17.87%) and stearic acid (average 13.78%) in thee manganese chloride treatment, and palmitic acid(average 15.00%) and myristic acid(average 14.24%) in the nickel chloride treatment were utilized.

• Archives of Pharmacal Research
• /
• v.15 no.2
• /
• pp.130-133
• /
• 1992

A series of copper complexes of some amino acid derivatives of 6-methoxy 3-methyl-coumarilic acid were prepared. The infrared, visible spectra and magnetic susceptibility of these compounds were reported. All copper complexes were foundt to have antimicrobial activity against gram-positive bacteria only.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.3
• /
• pp.187-200
• /
• 2013

Current research trends of non-copper wood preservatives for enhancing durability was reviewed; as a follow-up of the review in 2012 on copper-based wood preservatives. Main environmental friendly non-copper wood preservatives studied by many scientists were boron-based compounds, synthetic compounds from natural products, and pyrethroids family of chemicals, etc. The critical issue regarding treated woods with boron-based compounds used outdoors was the leaching of boron. Many studies mainly focused on boron fixation improvement using variety of polymers. Moreover, the studies showed notable increases in attempts to use natural products used commonly in the medical fields as wood preservatives as well as outdoor use of chemical modified such as acetylated wood developed in purpose of stabilizing dimension.