• 한국식품위생안전성학회지
• /
• 제9권4호
• /
• pp.229-235
• /
• 1994

It is very important to investigate the sanitary chemical conditions of farmwaters used for cattle breeding in the dairy farms. For this purpose we examined pH, KMnO4 consumption, total hardness, chloride, sulfate, NH3-N, NO3-N, fluoride, lead, iron, manganese, cadmium, copper, zinc and chrome in the farmwaters sampled 2 times(spring and summer)in Choongcheongnam and Kangwon Province. The pH of farmwaters in Choongcheongnam and Kangwon Province was 6.49$\pm$0.09, 6.70$\pm$0.06, total hardness 90.21$\pm$7.07, 64.53$\pm$6.38 mg/ι, consumption of KMnO4 4.13$\pm$0.62, 4.34$\pm$0.26mg/ι, NO3-N 6.51$\pm$0.55, 3.61$\pm$0.58 mg/ι, chloride ion 20.51$\pm$1.99, 5.41$\pm$1.36 mg/ι and sulfate ion 6.61$\pm$1.02, 7.28$\pm$1.30 mg/ι, respectively. But NH3-N was scarcely detected. Fluoride, iron, lead, cadmium, zinc, manganese and chrome were not detected from the tested farmwaters. There was high significance between each other in total hardness, NO3-N, chloride ion and sulfate ion. There was regional and seasonal significance in only NO3-N but only regional significance in total hardness and chloride ion.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.88-97
• /
• 2011

We carried out cationization of Dak pulp (paper mulberry bast fiber pulp) which is raw material of Hanji (Traditional Korean Paper) using a (3-chloro-2-hydroxypropyl) trimethyl ammonium chloride to improve dyeability during a dyeing of Hanji with Gardenia (Gardenia jasminoides) and smoke tree (Cotinus coggygria). Fiber specific charge densities were determined using polyelectrolyte titration method and K/S values of dyed Hanji was calculated by Kubelka-Munk equation. As the result, fiber specific charge density increased with degree of cationization. Colors of Hanji dyed with Gardenia did not vary significantly with degree of cationization, but cationized Hanji dyed with smoke tree showed a large increase of a* value and reddish yellow color. After-mordanting did not decrease K/S value of dyes with cationized Hanji. K/S values of dyed Hanji decreased with increasing dyeing temperature. For smoke tree, the cationization impair lightfastness of dyed Hanji without mordant. After-mordanting with copper acetate or iron chloride improved lightfastness of dyed Hanji.

• 한국화재소방학회논문지
• /
• 제15권1호
• /
• pp.108-115
• /
• 2001

본 연구에서는 600V 비닐절연전선에 열적 스트레스를 인가하였을 때 전선의 특성 변화를 분석하였다. 전선의 구조 분석에서 정상 전선은 표면에 방향성을 갖고 있으나, $400^{\circ}c$ 이상에서 열화된 전선의 경우 탄화물, 크랙, 결정 등이 형성되었다. 정상 전선의 표면 조성은 Cu ; 100%였으나, $800^{\circ}c$에서 열화된 전선의 단면 조성은 Cu : 78.89%, O : 21.11%를 나타냈다. 연동선의 시차주사열량 분석 결과 $700^{\circ}c$ 이상에서 열화된 전선에서 새로운 반응 피크가 관측되었다. 절연물의 시차열 분석에서 $150^{\circ}c$로 열화된 전선의 경우 정상 전선의 반응점보다 낮은 $264^{\circ}c$에서 흡열 반응이 나타났다. 등선의 열화에 따른 산소 점유율은 $500^{\circ}c$에서 약 20%이다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.502-514
• /
• 1998

The purpose of this study is to observe the corrosion characteristcs of four dental amalgams(CAULK FINE CUT, CAULK SPHERICAL, DISPERSALLOY, TYTIN) and to determine a function of chloride concentration through the anodic polarization curve obtained by using a potentiostat. After each amalgam alloy and Hg being triturated, the triturated mass was inserted into the cylinderical metal mold, and condensed by hydrolic pressure. Each specimen was removed from the metal mold. 24 hours after condensation, specimens were polished with the emery paper and stored at room temperature for 6 months. The anodic polarization curves were employed to compare the corrosion behaviours of the amalgam m KCl and KCl-NaCl solution, which had chlonde concentration of 0.4 g/l, 0.8 g/l, 1.2 gil, and 1.6 gil at $37^{\circ}C$ with 3-electrode potentiostat. After the immersion of specimen in electrolyte for 1 hour, the potential scan was begun. The potential scan range was - 1500mV ~+800mV(vs. S.C.E.) in the working electrode and the scan rate was 50mV/sec. The results were as follows, 1. The corrosion potential. the potential of anodic current peak, and transpassive potential in the solution of high chloride concentration shifted to more cathodic direction than those in the solution of low concentration, and the current density in the solution of high chloride concentration was higher than that in the solution of low concentration. 2. The corrosion potential, the potential of anodic current peak, and transpassive potential for CAULK FINE CUT amalgam were the most cathodic among the others, and the current density were the highest among the others. 3. In the solution of low chloride concentration, the corrosion potential, the potential of anodic current peak, and transpassive potential for DISPERSALLOY were the most anodic among the others, however in the solution of high chloride concentration, those for TYTIN were the most anodic among the others. 4. The anodic polarization curve for CAULK SPHERICAL was similar to that for high copper amalgams.

• 자원환경지질
• /
• 제25권3호
• /
• pp.233-243
• /
• 1992

옥산지역에 위치하는 황학동광상은 초기백악기 퇴적암류내에 발달한 열극을 충진한 열수맥상 광상으로, 구조운동에 수반되어 3회에 걸쳐 생성된 석영 및 방해석맥으로 구성된다. 주된 금속광물로는 황철석, 자류철석, 황동석, 섬아연석, 방연석, 적철석 및 Ag-, Pb-, Bi-sulfosalts로, 이들의 침전은 주로 광화 제 1 기의 0.5~7.6 wt.% NaCl 상당염농도를 갖는 광화유체로부터 $370^{\circ}C$ 에서 약 $200^{\circ}C$ 에 걸쳐 진행되었으며, 광화 작용시의 압력은 <180 bar, 섬도는 700~2,400 m 였다. 광상내에서 보여주는 광물공생관계에 의한 열역학적 고찰과 유체포유물 및 안정동위원소 연구결과 등으로 미루어 본 광상광화유체내 Cu는 주로 chloride complex 상으로 이동되었으며, 주로 광화유체의 냉각작용과 이에 의한 지화학적 환경요인들($fs_2$, $fo_2$, pH)의 변화에 기인하여 침전되었음을 알수 있다. 유황안정동위원소 연구결과, 주광화시기인 광화1기중 광화유체의 ${\delta}^{34}S_{H_2S}$ 값이 초기 8.2‰ 에서 후기 4.7‰ 로 점차 감소함은 광화유체의 비등에 수반되어 수소이온농도와 함께 산소분압이 점진적으로 증가한 결과로 해석되며, 광화유체의 수소 및 산소동위원소 값으로부터 열수계에서 천수가 지배적인 역할을 하였음을 알수 있다.

• 한국염색가공학회지
• /
• 제11권4호
• /
• pp.39-49
• /
• 1999

In order to study the properties of cochineal colors, uv-visible spectra of cochineal colors solution, dyeing properties on the wool in several dyeing conditions and thermodynamic parameters were investigated. UV-visible spectra of cochineal colors solution showed hypochromic effect with the lapse of irradiation time but bathochromic shift with decreasing acidity of solution and addition of metallic ions. The concentration of cochineal colors in wool fiber increased with the increase of dyeing temperature, time, and acidity of initial dyebath. The value of apparent diffusion coefficients and standard affinities of dyeing decreased with the increase of dyeing temperature. The standard heats of dyeing$(\Delta{H}^\circ)$ and variation of entropy$(\Delta{S}^\circ)$ increased with the increase of concentration of initial dyebath. The activation energy$(E_a)$ were calculated to be 1.399~2.595kcal/mol in condition of 6~1%(o.w.f) dyebath. Wool fabrics were dyed reddish blue by iron sulfate, copper sulfate, aluminum acetate and tannic acid, and red by tin chloride, respectively. Lightfastness of wool fabrics dyed by cochineal colors were increased by mordant treatment, especially copper sulfate and iron sulfate treatment.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권6호
• /
• pp.721-726
• /
• 1995

In this paper, reduction characteristics of NOx gas produced from diesel engine combustion is studied by using pulse corona discharge. Nox concentration of 1900ppm (NO 1870, NO$\sub$2/ 30 ppm, N$\sub$2/ balance gas) was controlled in a fixed quantity of 280ppm, using a flow meter. Reactors are composed of cylinder type. NOx reduction rate is investigated with discharge electrode diameter[0.5,1,3,4.phi.], reactor length [130,300mm], reactor materials[Copper, Poly Vinyl Chloride] and Input voltage[DC, AC, DC Pulse square voltage]. In the result, NOx reduction rate is the best of all in copper reactor, small electrode diameter[0.5.phi.], DC pulse voltage and long reactor[300mm]. Then Teduction rate of NOx is about 93%.

• Bulletin of the Korean Chemical Society
• /
• 제12권3호
• /
• pp.276-281
• /
• 1991

Electrochemical behaviors of optically active sparteine-Cu(II) dihalide complexes were investigated by polarography and cyclic voltammetry (CV). These Cu(II) complexes are rather easier to be reduced to Cu(I) states when comparison is made with other nonplaner copper complexes, We have assigned the CV peaks and polarographic waves related to the redox processes for these complexes. We could also observe the exchange reaction of Cu(II) ion in the complex with mercury metal in the cell having mercury pool. The redox mechanism of these complelxes is as follows; The 1st wave appeared at +0.47 V/+0.65 V corresponds to the reaction of $SpCuX_2+ e{\rightleftarrow}SpCuX_{2^-}$ and the 2nd one at +0.26 V/+0.21 V does the reaction of $SpCuX_{2 ^-} +e{\rightleftarrow}SpCuX_2^{2-}$. The 3rd one at -0.35 V/-0.27 V is dueto the reduction of mercury complex formed via exchange reaction. Where, X is chloride ion.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제9권4호
• /
• pp.15-23
• /
• 2004

제설제를 살포하는 것은 도시지역에서 자동차가 겨울철에 운행하는 동안 안전한 운전을 가능하게 한다. 하지만 많은 양의 제설제 (염화칼슘과 소금)를 사용하는 것은 심각한 환경문제를 발생시키고 도로변 퇴적물에 함유된 중금속의 거동을 변화시키게 되며, 결과적으로 염소이온과의 착이온형성에 기인된 중금속의 이동성을 증가시키게 될 것이다. 제설제의 농도가 중금속 (카드뮴, 아연, 구리, 납, 비소, 니켈, 크롬, 코발트, 망간 및 철)의 용출특성과 이동성에 미치는 영향을 연구하기 위하여, 서울시 주요 도로변에서 채취한 퇴적물을 대상으로 제설제의 농도 (0.01-5.0M)를 변화시켜 용출실험을 수행하였다. 연구결과, 도로변 퇴적물에 함유된 아연, 구리 및 망간은 쉽게 용해되어 이동되는 반면, 크롬과 코발트는 도로변 퇴적물에 강하게 고정되어 있음을 관찰하였다. 이번 용출실험에서 검출된 아연 (최대 $118.6{\mu}g/g$). 구리 (최대 $44.9{\mu}g/g$) 및 망간 (최대 $42.2{\mu}g/g$)의 함량은 상대적으로 높은 함량이었다. 제설제는 흡착 (또는 침전)된 금속과 용해된 금속 사이의 분배를 감소시키며, 이는 제설제가 용해된 눈 녹은 물에 용존 중금속 함량을 증가시키게 되어 결과적으로 지표수의 수질을 악화시키게 된다. 또한, 도로에 제설제를 살포하는 것에 의해 중금속이 지하수까지 침투되어 지하수를 오염시키게 될 것이다.

• Carbon letters
• /
• 제4권2호
• /
• pp.86-92
• /
• 2003

A series of micro- and mesoporous activated carbons were prepared from two kinds of phenolic resin using a metal treated chemical activation methodology. $N_2$-adsorption data were used to characterize the surface properties of the produced activated carbons. Results of the surface properties and pore distribution analysis showed that phenolic resin can be successfully converted to micro- and mesoporous activated carbons with specific surface areas higher than 973 $m^2/g$. Activated carbons with porous structure were produced by controlling the amount of metal chlorides ($CuCl_2$). Pore evolvement depends on the amount of additional metal chloride and precursors used. From the SEM and EDX data, copper contents were shown to be most effected by the incremental addition of metal chloride.