본 연구는 동제련슬래그 내에 존재하는 Fe와 Cu의 동시 환원을 통해 주물용 선철을 제조하고, 선철 제조 시 황 함량 저감에 대한 실험을 진행하였다. Roasting 실험은 실험온도 $500^{\circ}C$, $700^{\circ}C$, $900^{\circ}C$ 온도 조건에서 1시간에서 9시간까지 2시간 간격으로 시간을 변화시키면서 실험을 진행 하였다. 산소분압에 따른 실험은 산소분압 0.5, 0.8, 1.0, 실험 온도는 $900^{\circ}C$, 유지시간 30분으로 설정하여 실험을 진행하였다. 실험 결과 Roasting 및 산소분압에 따른 황 저감의 영향은 없는 것으로 확인되었다. 첨가제로 CaO를 사용하여 첨가량 15 % 이상부터 S 성분 함량은 0.001 wt% 이하로 확인되었다. 반응온도에 따른 선철 및 슬래그 분리 실험의 조건은 $1300^{\circ}C{\sim}1600^{\circ}C$까지의 온도조건에서 유지시간 30분, Ar 가스 분위기에서 진행하였으며, 반응시간에 따른 선철 및 슬래그 분리 실험의 조건은 유지시간 5 ~ 25분까지 5분 간격, 반응온도 $1600^{\circ}C$, Ar가스분위기에서 실험을 진행하였다. 실험 결과 $1600^{\circ}C$, 30분 유지 환원 조건에서 선철의 회수율이 가장 높았다.
We characterized the smelting process and smelting furnace through scanning electron microscopy-energy dispersive spectroscopy, wavelength dispersive X-ray fluorescence, X-ray diffraction, and raman micro-spectroscopy with 13 relics including slags and furnace walls excavated from square-shaped building sites and pits of the Three Kingdoms site at the Ungyo site section I. Our results revealed that the principal components were FeO and SiO2; and CuO, PbO, and ZnO were contained in small quantities. Furthermore, fayalite, magnetite, augite, copper, and cuprite were found. High contents of FeO or SiO2 components seem to have been added to form fayalite to remove gangue in the smelting process. The relatively low content of S detected in the copper prills suggests that roasting was performed well. Cristobalite and mullite, which are minerals that indicate high-temperature found in the furnace wall, show that the smelting temperature was higher than 1,250℃. The findings of this study show a high possibility that the Wanju Ungyo site is smelting remains of copper ores, which are nonferrous metals, rather than iron. Various smelting byproducts excavated in this area in the future will help us better understand the copper smelting process that may have been performed since ancient times.
Recently, the river sands are in short supply. Gathering sea-sand will be faced with difficulty. Alternative aggregates for concrete are estimated by many researchers. The aggregates are blast furnace slag, steel slag, copper slag, ferro-nickel slag and recycled aggregate and etc. Nevertheless steel slag has been limited in practical use due to its expansibility which is occurred reaction with water and free CaO in slag. Most recently stable management method is to minimize the expansibility researched and developed. First of all, slump, air content, compressive strength and flexural strength are measured in concrete. An estimate is made of the segregation of concrete containing atomized steel slag by Image Analyser program.
The present investigation is mainly focused on studying the flexural behavior of reinforced geopolymer concrete (RGPC) beams under pure bending. In this study, copper slag (CS) was used as a partial replacement of fine aggregate. Sand and CS were blended in different proportions (100:0, 80:20, 60:40 and 40:60) (sand:CS) by weight. Fly ash and ground granulated blast furnace slag (GGBS) were used as binders and combination of sodium hydroxide (8M) and sodium silicate solution were used for activating the binders. The reinforcement of RGPC beam was designed as per guidelines given in the IS 456-2000 and tested under pure bending (two-point loading) after 28 days of ambient curing. After conducting two point load test the flexural parameters viz., moment carrying capacity, ultimate load, service load, cracking moment, cracking load, crack pattern and ultimate deflection were studied. From the results, it is concluded that RGPC beams have shown better performance up to 60% of CS replacement.
In the 1970's, the environmental preservation is out of public issue, caused by rapid economic growth and industrialization. When the people's living standard Is grows, they aware of the environmental importance. In modern times, the environment preservation is global tendency and self social awareness is arise. Measures to the environment preservation and pollution is going on study. One measure is recycling and reuse of by product and it is already developed in some advanced country. But, the study about by product reuse is just beginning in domestic. The purpose of this study is reusing copper slag by product which produced in the copper refining process-as fine aggregate for developing high strength concrete. Concrete nix and properties, the result of mock up test for site application are analyzed.
폐금속 광산 지역 등지에서 중금속으로 오염된 지하수의 정화 및 오염 확산 방지를 위하여 투수성 반응벽체를 사용할 수 있다. 본 연구에서는 제강슬래그가 중금속 오염지하수의 이동, 확산 방지를 위한 투수성 반응벽체 충전물질로서 사용가능한지를 평가하기 위하여 카드뮴, 구리, 납에 대한 이동성을 평가하였다. 중금속으로 오염된 현장의 조건을 고려하여, 1) 단일 및 혼합상태에 따른, 2) 카드뮴의 경우 초기 농도에 따른 영향을 주상실험을 이용하여 평가하였다. 또한 평형흡착을 가정한 이류-확산 방정식의 해석해를 이용하여 정량적인 평가도 수행하였다. 중금속 종류별로는 단일오염과 복합오염에 상관없이 카드뮴이 구리보다 지연정도가 적게 나타났다. 카드뮴의 지연계수는 혼합인 경우 3.94였고, 구리의 경우 단일에서는 40.3, 혼합에서는 25였다. 카드뮴과 구리의 지연정도의 차이는 전기음성도에 의한 친화력이 다르기 때문으로 판단된다. 전기음성도가 비슷한 구리와 납의 경우 비슷하게 파과가 진행되었지만, 납의 경우 파과가 진행되다가 유출수에서의 농도가 현저하게 줄어 나타난데 반해 구리는 파과진행 후 유출수에서 초기 농도보다 높은 농도가 나타났다. 이는 납이 흡착되어 있던 구리를 탈착시키고 그 공간에 흡착되었기 때문이라고 사료된다. 결국 흡착되어 있던 중금속이 다른 중금속에 의하여 탈착되는 현상이 나타났다. 제강슬래그에서는 중금속이 반응하면서 흐름특성이 변화하는 것으로 나타났다. 카드뮴의 초기농도가 증가함에 따라 지연정도는 감소하여 나타났다.
최근 국내에서는 다양한 형태로 연안이 개발되고 있다. 이에 따라 안전사고를 예방하고 경관을 저해시키지 않는 새로운 소파블록의 개발이 요구되고 있다. 회파블록은 상부가 평탄하여 친수공간으로 활용이 가능하지만, 구조 내부에 존재하는 회파관으로 인해 중량손실이 발생한다. 따라서 이에 대응하기 위해 중량콘크리트를 사용하여 파랑 저항성을 상승시킬 필요성이 있다. 이러한 목적을 위하여 본 연구에서는 동슬래그 및 자철석을 골재로 사용한 중량 콘크리트를 개발하고 이의 염해저항성을 평가하였다. 연구 결과에 따르면, 일반 골재와 중량골재를 각각 혼입한 콘크리트의 28일 압축강도는 큰 차이가 발생하지 않았으나, ASTM C1202에 의한 염소이온침투저항성 시험 시 자철석을 혼입한 콘크리트는 과도한 전류의 흐름으로 평가가 불가능한 것으로 나타났다. 그러나 염소이온의 침투깊이를 이용하는 NT Build 492 시험에서는 ASTM C 1202 시험법에서 관찰된 문제점 없이 실험 진행이 가능하였고, 동슬래그, 자철석을 골재로 사용한 중량 콘크리트의 염소이온침투저항성이 가장 우수한 것으로 나타났다. 따라서 동슬래그 및 자철석을 골재로 사용한 중량콘크리트는 회파블록에 적용이 가능할 것으로 판단된다.
Development of the construction industry generally exhausts natural aggregate. Hence it is problem to the lack of supply and quality deterioration, so the resource saving and protection of environment is made an effort through recycling by-product. This study presents that fundamental properties of concrete which used cooper slag as alternate sand of low fineness modulus and plan of cooper slag as concrete aggregate. Testing factors are concrete's slump, air contents, unit weight and compressive strength. The results of this study are as follows; (1) Concrete slump is generally satisfied with the condition but is inferior to the others in substitution rates 30%. Also air contents are 3.1-4.1% and go up according to increase substitution rate. (2) Unit weight increase in 1.1% as the mixing ratio of cooper slag argument 10%. (3) compressive strength of cooper slag concrete is similar to plain and especially higher 11-15% in W/C 45%, 50%. So it seems that aggregate mixed cooper slag is suitable to low water-cement ratio mixture.
Steel slag has been considered as an industrial waste. A huge amount of slag is produced as a byproduct and the steel slag usually has been dumped in a landfill site. However the steel slag contains valuable resources such as iron, copper, manganese, and magnesium. Superconducting magnetic separation has been applied on recovery of the valuable resources from the steel slag and this process also has intended to reduce the waste to be dumped. Cryo-cooled Nb-Ti superconducting magnet with 100 mm bore and 600 mm of height was used as the magnetic separator. The separating efficiency was evaluated in the function of magnetic field. A steel slag was ground and analyzed for the composition. Iron containing minerals were successfully concentrated from less iron containing portion. The separation efficiency was highly dependent on the particle size giving higher separating efficiency with finer particle. The magnetic field also effects on the separation ratio. Current study showed that an appropriate grinding of slag and magnetic separation lead to the recovery of metal resources from steel slag waste rather than dumping all of the volume.
폐금속 광산 지역 등지에서 중금속으로 오염된 지하수의 정화 및 오염확산 방지를 위하여 투수성 반응벽체를 사용 할 수 있다. 본 연구에서는 슬래그가 투수성 반응벽체 충진물질로서 적당한지 평가하기 위하여 폐광산 지역에서 문제가 되고 있는 몇 가지 중금속(i.e., Pb, Cu, Cd)에 대한 슬래그의 반응성을 평가하였다. 폐광산 지역 지하수에는 중금속류들이 복합오염의 형태로 존재하며, 음이온 물질인 황산염, 탄산염 등도 공존한다. 중금속으로 오염된 현장의 조건을 고려하여, 1) 중금속 종류에 따른, 2) 초기 농도에 따른, 3) 음이온(황산염)의 존재에 따른 영향을 회분식 실험을 통하여 슬래그의 흡착능을 평가하였다. 슬래그의 흡착특성은 등온흡착평형(equilibrium sorption)과 동적인 흡착(kinetic sorption)인 경우 각 조건에 따른 영향을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.