• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.4
• /
• pp.387-390
• /
• 1985

The effect of extracting conditions on the content of inorganic compounds of red ginseng extract was studied with respect to the change in ethanolic concentration ranges of $0{\sim}90%$ and temperature of $70{\sim}100^{\circ}C$ during $1{\sim}5$ times of extraction. Each extraction time was taken 8 hours at given temperature. Little effect of temperature on inorganic compounds was observed, while higher ethanol concentrations, particularly higher than 70%, were resulted a significant decreased in their contents. The yield of inorganic compounds in water was shown 80% over after 3rd extraction, while content of crude ash was observed similar tendency and their contents were significant increased in water than in 70% ethanolic concentration. In the process of extraction with water, 1.55% of the potassium content was the highest value, and the smallest was 11ppm of the copper. But in the extraction ratio to raw mateirls, the highest ratio was 91.4% of the calcium, and smallest was 30.4.% of the magnesium.

• Conservation Science in Museum
• /
• v.28
• /
• pp.109-136
• /
• 2022

This study analyzes the , one of the three panels of 《Welcoming Banquets for the Governor of Pyeong-an》, a documentary painting of the late Joseon Dynasty, with the aim to identify the coloring materials used in the painting. The painting was first imaged at each wavelength in order to minimize the potential problems in the process of analyzing specific parts. This study applied X-rays to identify ink, gold, and organic and inorganic pigments and used infrared rays to find ink and copper-based pigments. It also applied hyperspectral imaging to distinguish organic pigments from black, blue, and green materials. It also analyzed spots selected for each color to identify the following materials: white lead (white), ink/indigo (black), a combination of red lead and cinnabar (red), pink dye, purple dye, iron oxides (brown), orpiment/dye (yellow), malachite/malachite and yellow dye/indigo (green), azurite/white lead and indigo/indigo (blue), indigo and cochineal (violet), and gold leaf (gold). It is expected that more efficient analysis will be made possible by securing a sufficient library for each wavelength.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.547-553
• /
• 2006

To know the effect of pigments on the material properties of color concrete, mortar and concrete tests were carried out by the using 5 kinds of pigment. The major component of red, yellow and black pigments was iron oxide and coloring component of blue and green pigments was copper phthalocyanine. Properties of mortar and concrete were some of difference according to adding ratio and kind of pigments. In case of using red, yellow and black pigments, setting time of concrete speeded a little and compressive strength was tendency to increase and slump or air content of concrete was same or decreased. On the other hand, in case of using green and blue pigments, compressive strength of concrete decreased largely because of the excessive air entrainment of surfactant and sump or air content of concrete increased highly. When the antifoaming agent was added to the color concrete mixed with green and blue pigments, compressive strength of concrete was improved and similar to that of concrete without pigment.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.716-725
• /
• 2016

In this study, MCQ (Micronized copper Quat) which was copper-based wood preservative, was investigated on decay properties by difference of the its infiltration volume. After pressure-treatment with different MCQ concentration, test specimens (Japanese Red Pine) were exposed by a brown-rot fungus (Fomitopsis palustris). At the end of the 12 weeks exposure to the fungus, untreated specimen was showed the mass loss of more than 35%, and the value of preservative effectiveness of MCQ by indoor decay was $3.99{\pm}0.42kg/m^3$. Therefore, MCQ should be pressure-injected at least $3.99kg/m^3$. The three dimensional of the specimens were observed by using the light microscope and scanning electron microscope, Untreated and treatment specimens with low concentration generally had underwent serious decays and had a lot of fungal hyphae. Howere, the formation of bore hole by hyphae were not observed. Mass loss and decay properties of specimens were affected by amount of MCQ injection. Therefore, it is necessary to the review of the adequacy of the MCQ injection amount in domestic environments.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.11
• /
• pp.780-785
• /
• 2012

Existing states of attached algae in the sedimentation basin was observed during late april to early october, and the attached algae were visible 7 days after of cleaning the trough and the communities of algae became larger with increasing the operation periods. Attached algae community included bluegreen algae (Oscillatoria sp.), diatom (Synedra sp.,) and green algae (Mougeotia sp., Oedogonium sp.) and suspended diatom (Stephanodiscus sp.) as well. Diatom (Cymbella sp., Navicula sp., Synedra sp. and Stephanodiscus sp.), green algae(Mougeotia sp. and Cosmarium sp.) and blue-green algae (Anabaena sp.) were detected in the effluent of sedimentation basin. The chlorophyll-a (chl-a)concentrations of algae community on a square centimeter after 14 and 28 days were distinctively different depended on the copper sulphate treatment. The concentration of chl-a were $4{\mu}g/L/cm^2$ and $19{\mu}g/L/cm^2$ for the copper sulphate treated water and $59{\mu}g/L/cm^2$ and $147{\mu}g/L/cm^2$ for the untreated water. Diatom algae fragments were observed in red-brownish sediments on the bottom of industrial water distribution basin and degraded blue-green and green algae formated organic sediments combined with oxidized iron.

• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.270-281
• /
• 2021

The Yongjam of Oejae, Yi Dan-ha's wife, is an ornamental hairpin with a dragon-shaped engraving; designated as National Folklore Cultural Heritage No. 4. It is also a component of the ceremonial costume, and an artifact of great value as it clearly identifies the position of the wearer and the period of this artifact. The Yongjam has been well preserved in general; however, various pollutants and corrosive products have affected the engraved patterns, requiring conservation treatment. Furthermore, a non-destructive analysis was conducted to identify the components of the materials and the manufacturing techniques used in the ornament. The Yongjam is hollow inside to reduce its weight when placed in the hair and has a color contrast of gold, red, and black. The decorative part and the body were made separately. That is, the body was made from an alloy of copper, silver, and zinc, and its joint was elaborately connected without any overlaps. In the decorative part, different alloy ratios were identified in the dragon's face, beard, horn, body, and fin. Further, for the dragon's face with its delicate patterns, an alloy of silver and copper was used, likely to make the face appear as realistic as possible.

• KSBB Journal
• /
• v.13 no.5
• /
• pp.483-490
• /
• 1998

Two unidentified methanotrophic strains (MM-white and MM-red) secreting soluble methane monooxygenase (sMMO) involved in thrichloroethylene biodegradation have been isolated from mixed methanotrophic consortium (MM) around Taejon area. Subsequently four methanotrophic strains were isolated from MM and named according to their color; white (MS-white), yellow (MS-yellow), pink (MS-pink) and reddish brown (MS-rbrown). All strains except MS-yellow which can take glucose as well as methane, metabolized methane as a sole carbon source. They all showed symbiotic behavior when methane was used as the sole carbon source. Optimum conditions of cell growth for MM were pH of 6.8 - 7.2, temperature of 29 - 32$^{\circ}C$, and gas flow rate of 6 (for methane), 40 (for air), and 4 ml/min (for carbon dioxide). The sMMO activity was expressed as naphthalene oxidation rate (${\mu}$mol/ mg protein/ hr). The sMMO activity for MM grown in flask culture with 1 ${\mu}$M of CuSO4 was 36, while it was 61 without copper. The activity for MM grown in the fermentor without CuSO4 was 1077, but is was 197 after reaction with 5 ppm of TCE. The methanotrophs showed significantly high sMMO activity despite the presence of 1 ${\mu}$M of CuSO4, although most of other strains already known could not express sMMO activity under this condition.

• Journal of Powder Materials
• /
• v.3 no.4
• /
• pp.227-232
• /
• 1996

(i) The development of a metallurgical bond during the spray forming of clad products has offered the possibility of manufacturing large rolls, including those used in hot and cold strip mills. Small rolls are already being produced in Japan. (ii) Technical developments, including the use-of-multi-atomizers have resulted in the elimination of porosity from the internal bore of a sprayed tube. Bimetallic tubing can also be manufactured and the installation of a 4.5 ton tube plant in the USA should provide low operation costs. (iii) Spray forming offers a potentially low cost manufacturing route for superalloy ring/casing components in high strength superalloys. (iv) A large pilot plant has been built for the spray forming of ultra-clean superalloys for turbine disc applications. (v) Using twin-atomizing technology, special steel billets have been spray formed up to 400mm diameter with deposition yields in excess of 90%. (vi) Al/Si alloy extrusion billets with excellent dimensional tolerances are being manufactured for large scale automotive applications. Several new aluminum alloys have also been developed, including high strength, low density and low cocfficient of expansion materials. (vii) New copper alloys have been developed and pilot plants are in operation to produce these alloys once markets have become established.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2306-2310
• /
• 2010

Corrosion is a complex series of oxidation/reduction reactions between at the water-metal surfaces and materials in which the water is stored or transported. With respect to the corrosion potential of drinking water, the primary concerns include the potential presence of toxic metals, such as lead and copper; deterioration and damage to the household plumbing, and aesthetic problems such as stained laundry, and bitter taste. This study was performed to evaluate the effects of corrosion inhibitors on corrosion rates, Fe and Cu release concentration in water distribution pipes. Decrease of corrosion rates were strongly related to phosphate corrosion inhibitors. Considering that typical corrosion processes consists of a series of electrochemical reaction at the metal surface in contact with water, corrosion rates were positively correlated with Fe release.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.8
• /
• pp.1137-1142
• /
• 2004

A spectrophotometric and first derivative spectrophotometric method was developed in aquatic Tween 80 micellar solutions for selective determination of nickel without using any pre-separation step. 1-(2-Pyridylazo)-2-naphthol (PAN), as a sensitive chromogenic complexing agent formed a red-colored Ni(II)-PAN complex in Tween 80 media with satisfactory solubility and stability. Conditions such as pH, PAN concentration, type and concentration of micellizing agent were optimized. Molar absorptivity of Ni-PAN complex was found $4.62\;{\times}\;10^4L\;cm^{?1}\;mol^{?1}$ at 569 nm, under the optimum condition. Calibration graphs were derived by zero, first and second derivative spectrophotometry at maximum wavelengths of 569, 578 and 571 nm with linear ranges of 30-1800, 20-2500 and 30-2000 ng $mL^{?1}$ , respectively. Precision as standard deviation as well as accuracy as recovery percent were in the range of 1-20 ng $mL^{?1}$, and 93.3-103.3%, respectively, for the entire of the linear ranges. Spectrophotometric detection limit was 3 ng $mL^{?1}$ and effects of diverse ions on the first derivative determination of nickel were studied to investigate selectivity of the method. Interferences of cobalt and copper on the nickel determination were prevented using o-phenanthroline as masking agent. The recommended procedures were applied to the various synthetic and stainless steel alloys, tea leaves and human hair, with satisfactory results.