• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.29-32
• /
• 2002

Thermodynamics of copolymerization is one of the fundamental elements for studying the effects of copolymerization parameters on the copolymer characteristics. Up until now, it has not been easy work not because there are not effective models but because the known thermodynamic values are limited to some copolymer pairs. Recently, owing to the development of molecular modeling methods, some thermodynamic parameters can be calculated and estimated on computer. (omitted)

• The International Journal of Costume Culture
• /
• v.6 no.2
• /
• pp.134-146
• /
• 2003

Polyester of linear homopolymer poly(ethylene terephthalate)(PET) was chemically modified through the formation of branched copolymer to improve the undesirable properties of fiber. Photo-induced graft copolymerization of the acrylic monomers acrylic acid (AA) and methyl acrylate (MA) in the liquid and vapor phase, respectively, onto N,N-dimetylformamide (DMF)-pretreated PET fibers was carried out. The effect of various synthesis conditions and DMF pretreatment of the PET on the graft yield was investigated. Grafting mechanism was analysed. The grafting was promoted by increasing DMF pretreatment temperature and amount of DMF retention in the fiber. The increasing biacetyl and monomer flow time, and irradiation time enhanced the grafting up to a certain amount and thereafter it decreased.

• Journal of the Korean Chemical Society
• /
• v.17 no.5
• /
• pp.371-377
• /
• 1973

The low temperature anionic copolymerization of p-tolylisocyanate ($M_1$) with n-hexylisocyanate ($M_2$) in DMF was carried out with NaCN. Copolymers were characterized by osmometry and I. R. spectrophotometry. Also copolymer composition was analyzed by spectral measurements. The behavior of this copolymerization system was the type of less ideal, that is the $M_2$ prefers to react exclusively with the same kind of species. The stress-strain behavior of the copolymer obtained from equimolar comonomer feed exhibited somewhat brittle or rigid character.

• Macromolecular Research
• /
• v.15 no.2
• /
• pp.134-141
• /
• 2007

The direct chromatographic separation of enantiomers by chiral stationary phases (CSPs) has been extensively developed over the past two decades, and has now become the most popular method for the analytical and preparative separations of enantiomers. Polysaccharide derivatives coated onto silica gel, as CSPs, playa significantly important role in the enantioseparations of a wide range of chiral compounds using high-performance liquid chromatography (HPLC). Unfortunately, the strict solvent limitation of the mobile phases is the main defect in the method developments of these types of coated CSPs. Therefore, the immobilization of polysaccharide derivatives onto silica gel, via chemical bonding, to obtain a new generation of CSPs compatible with the universal solvents used in HPLC is increasingly important. In this article, our recent studies on the immobilization of polysaccharide derivatives onto the silica gel, as CSPs, through radical copolymerization with various vinyl monomers are reported. Polysaccharide derivatives, with low vinyl content, can be efficiently fixed onto silica gel with high chiral recognition.

• Elastomers and Composites
• /
• v.28 no.3
• /
• pp.191-197
• /
• 1993

The graft copolymerization of methyl methacrylate(MMA) onto natural rubber latex(NRL) initiated by t-butyl hydroperoxide(t-BHPO) was investigated in aquous medium. The grafting percentage, grafting efficiency and total conversion were observed in various reaction conditions such as monomer, initiator and emulsifier concentration, reaction temperature, reaction time and agitation speed. The optimum conditions for the graft copolymerization onto natural rubber latex were as follows ; At given monomer concentration of $3{\times}10^{-2}mole/l$, the maximum grafting percentage was appeared in the case of grading in initiator concentration of $4{\times}10^{-2}mo1e/l$ and emulsifier concentration of 0.2wt.% at $40^{\circ}C$ for 5hrs.

• Elastomers and Composites
• /
• v.28 no.3
• /
• pp.183-190
• /
• 1993

The radical copolymerization with propagation and depropagation is presented in order to estimate reactivity rate of monomers and $K_{11}$(the equilibrium constant for propagation and depropagation) in the copolymerization of ${\alpha}-methylstyrene-co-methylmethacrylate$ and ${\alpha}-methylstyrene-acrylonitrile$. The value of ${\alpha}-methylstyrene$ and methylmethacrylate and $K_{11}$ are found to be 0.48, 0.47 and 5.0 respectively. The value of ${\alpha}-methylstyrene$ and acrylonitrile and the $K_{11}$ are found to be 0.1251, 0.0577 and 23.8 respectively. The treatment rate constant of ${\alpha}-methylstyrene-co-methylmethacrylate$ and ${\alpha}-methylstyrene-co-acrylonitrile$ in the copolymerization is estimated to be 2.5, 80.72 regardless of monomer feed composition.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.10
• /
• pp.1044-1046
• /
• 2000

Catalytic copolymerization of diethyl dipropargylmalonate (DEDPM) and phenylacetylene (PA) by Mo(CO)6 and (toluene) Mo(CO)3/chloranil has resulted in the expected copolymer consiting of a polyene backbone with five-and/or six-membered rings and th e PPA structure. Both complexes exhibited not only varying degree of catalytic activity depending upon the relative mole ratio of two monomers but also characterize the types of coploymers. The former yields the polyene backbone containing only five-membered rings as well as PA while the latter produces the polymers consisting of both five-and six-membered ring structure. Comparative studies show that Mo(CO)6 exhibits reactivity toward DEDPM alone, thus catalyzing initially metathesis cyclopoly-merization of DEDPM followed by copolymerization with PA while the (toluene)Mo(CO)3/chloranil system shows affinity for both PA and DEDPM.

• Macromolecular Research
• /
• v.17 no.3
• /
• pp.144-148
• /
• 2009

Poly(1-oxo-2-phenyltrimethylene) was synthesized by palladium-catalyzed copolymerization of styrene and carbon monoxide in quaternary ammonium ionic liquids. The $[Pd(bipy)_2][PF_6]_2$ compound had relatively more catalytic activity than $[Pd(bipy)_2][BF_4]_2$ in ionic liquids. The catalytic activity of palladium (II) composite catalyst was superior to the catalyst formed in situ from palladium acetate, 2,2-bipyridyl, and $X^-$ ($X^-=PF_6^-$, $BF_4^-$) in ionic liquids. The effects of the volume of ionic liquids, reaction time and benzoquinone content on the copolymerization were also described.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1028-1029
• /
• 2003

The copolymerization of ethylene and norbornene was carried out with ansa-metallocene and modified methylaluminoxane (MMAO) cocatalyst. The copolymerization behavior was changed with the structure of metallocene catalysts. In addition the catalyst activity was dependent on the structure of MMAO, i.e.. MMAO-4 which contains less i-butyl group compared to MMAO-3A exhibited higher catalyst activity than MMAO-3A. The glass transition temperature and the composition of the produced copolymer were not affected by MMAO type.

• Journal of the Korean Chemical Society
• /
• v.15 no.5
• /
• pp.281-284
• /
• 1971

Copolymerization of glycidyl methacrylate(GMA) with methyl acrylate(MA) and the reaction of the copoly mer with primary amines were investigated. The monomer reactivity ratios were determined by Mayo-Lewis intersecting method. $r_1=0.22{\pm}0.03(GMA),\;r_2=0.50{\pm}0.07(MA)$. GMA and MA copolymerized to afford the polymer having good alternate arrangements of the units of the monomers.