• Journal of Microbiology and Biotechnology
• /
• 제12권3호
• /
• pp.518-521
• /
• 2002

Poly(3-hydroxyalkanoate) copolyesters containing both carbon-carbon double and carbon-carbon triple bonds were produced by Pseudomonas oleovorans grown in mixtures of 10-undecynoic acid (10-UND($\equiv$)) and 10-undecenoic acid (10-UND(=)). The PHA content in the dry cells was usually 40 wt%. The bioconversion yield of ($10-UND({\equiv})$) to PHA by P. oleovorans was remarkably enhanced from 1% to over 24% as the fraction of 10-UND(=) in the carbon substrate mixtures increased from 0 to 50%. These values were higher than those obtained when P. oleovorans was grown in the same molar mixtures of ($10-UND({\equiv})$) and nonanoic acid (NA), indicating that 10-UND(=) was more efficient than NA as a cosubstrate in inducing cometabolic PHA production.

• Food Science and Biotechnology
• /
• 제16권1호
• /
• pp.62-66
• /
• 2007

Four different biopolyester films, two aliphatic polyesters including polylactides (PLA) and poly(3-hydroxy-butyrate-co-3-hydroxyvalerate (PHBV), and two aliphatic-aromatic copolyesters including Ecoplex and Biomax, were prepared using by thermo-compression, and their tensile and water barrier properties were determined. Among the films tested, PLA film was the most transparent (T: 95.8%), strongest, and stiffest (TS, 40.98 MPa; E, 1916 MPa), however it was rather brittle. In contrast, Ecoplex film was translucent while being the most flexible and resilient (EB, 766.8%). Biomax film was semitransparent and was the most brittle film tested (EB, 0.03%). All biopolyester films were water resistant exhibiting very low water solubility (WS) values ranging from 0.0.3 to 0.36%. PHBV film showed the lowest water vapor permeability (WVP) value ($1.26{\times}10^{-11}\;g{\cdot}m/m^2{\cdot}sec{\cdot}Pa$) followed by Biomax, PLA, and Ecoflex films, respectively. The water vapor barrier properties of each film were approximately 100 times higher than those of carbohydrate or protein-based films, but about 100 times lower than those of commodity polyolefin films such as low-density polyethylene (LDPE) or polypropylene (PP).

• 한국환경보건학회지
• /
• 제39권1호
• /
• pp.1-18
• /
• 2013

Objectives: Although a great body of knowledge is available on the toxicity of bisphenol A (BPA), little is known about that of BPA alternatives, such as bisphenol analogues (BPs) or $Tritan^{TM}$ copolyesters. This review provides a summary of the available information on the toxicity of BPs and three components of $Tritan^{TM}$, with a special focus on endocrine disruption. Methods: We collected from the literature a battery of in vitro and in vivo assay data developed to assess endocrine disruption of four BPs (bisphenol AF, B, F, and S) and three major components of $Tritan^{TM}$ ((di-methylterephthalate (DMT), 1,4-cyclohexanedimethanol (CHDM), and 2,2,4,4-tetramethyl-1,3-cyclobutanediol (TMCD)). Results: Several alternative compounds were identified as possessing comparable or even greater endocrinedisrupting effects than BPA in in vitro and in vivo studies. Conclusions: Potential endocrine disruption of BPA alternatives requires further studies on health consequences in experimental animals and in humans following longer term exposure.

• Bulletin of the Korean Chemical Society
• /
• 제15권12호
• /
• pp.1089-1093
• /
• 1994

Polyesters containing enaryloxynitriles moiety have been newly prepared from p-bis[1-[4-(3-hydroxypropyl)phenoxy]-2,2-dicyano vinyl]benzene (3) and common diols with terephthaloyl chloride. The copolyesters have a good solubility in common organic solvents as well as polar aprotic solvents. They undergo a curing reaction at around 350 $^{circ}C$ and show a 50-60${\%}$ of residual weight at 500 $^{circ}C$. The enhanced thermal stabilities were due to the intramolecular cyclization or intermolecular cross-linking reaction of the dicyanovinyl group incorporated into polyester by copolymerization.

• 미생물학회지
• /
• 제48권3호
• /
• pp.200-206
• /
• 2012

활성슬러지로부터 특이한 조성의 polyhydroxyalkanoates (PHAs)를 생합성하는 Pseudomonas aeruginosa P-5를 분리하였다. 이 균주는 nonanoic acid나 heptanoic acid와 같은 홀수개의 탄소수를 가지는 지방산을 단일 탄소원으로 공급해주었을 경우, 3-hydroxyvalerate (3HV)와 medium-chain-length (MCL) 3-hydroxyalkanoates 단위체로 이루어진 공중합체를 생산하였다. 공중합체 내 3HV의 함량은 valeric acid와 같은 보조기질을 공급함으로써 증가시킬 수 있었으며, 2 g/L nonanoic acid와 1 g/L valeric acid로 이루어진 혼합기질로부터 3HV의 함량이 26 mol%에 달하는 공중합체를 얻을 수 있었다. 이러한 공중합체는 결정성이 매우 낮아 점착성 고분자로서의 성질을 보였다. P. aeruginosa P-5 균주는 MCL-PHA synthase 유전자(phaC1, phaC2)를 가지고 있는 반면에 SCL-PHA synthase 유전자는 결여되어 있는 것으로 나타났다. 따라서 P. aeruginosa P-5 균주의 MCL-PHA synthase는 MCL(R)-3-hydroxyacyl-CoAs 뿐만 아니라 (R)-3-hydroxyvaleryl-CoA를 기질로 인지하는 특이한 기질특이성을 갖는 것으로 사료된다.

• Journal of Microbiology
• /
• 제39권1호
• /
• pp.79-82
• /
• 2001

The influence of levulinic acid (LA) on the production of copolyester consisting of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) by Ralstonia eutropha was investigated. Addition of LA into the culture medium greatly increased the molar fraction of 3HV in the copolyester, indicating that LA can be utilized as a precursor of 3HV. In shake flask culture, the 3HV content in the copolyester increased from 7 to 75 mol% by adding 0.5 to 4.0 g/L LA to the medium containing fructose syrup as a main carbon source. A maximal copolyester concentration of 3.6 g/L (69% of dry cell weight) was achieved with a 3HV content of 40 mo1% in a jar fermentor culture containing 4.0 g/L of LA. When LA (total concentration, 4 g/L) was added repeatedly into a fermentor culture to maintain its concentration at a low level, the copolyester content and the 3HV yield from LA reached up to 85% of dry cell weight and 5.0 g/g, respectively, which were significantly higher than those when the same concentration of the LA was supplied al1 at once. The present results indicated that LA is more effective than propionate or valerate as a cosubstrate fur the production of copolyesters with varying molar fractions of 3HV by R. eutropha.

• 공업화학
• /
• 제2권3호
• /
• pp.246-252
• /
• 1991

Poly (ethylene terephthalate) (PET)와 Poly (1, 4-phenylene terephthalate) (PHT)의 copolyester (PEHT)를 PHT 반복단위의 함량이 30mo1% 미만인 범위에서 용액중합으로 합성하고 이들의 물성을 조사하였다. PEHT 중 PHT의 함량이 증가함에 따라 유리전이 온도, 결정화 속도, 내열성은 증가하고, 녹는점은 감소하였다. PHT 반복단위 함량이 16.5, 24.9 mol %인 경우 액정성을 관찰할 수 있었으며, PET 반복단위와 PHT 반복단위에 의한 결정이 혼재함을 광각 X-선 회절로부터 관찰하였다.

• 한국응용과학기술학회지
• /
• 제16권3호
• /
• pp.255-262
• /
• 1999

The new copolymers which contain flexible spacers in main chain were prepared and their properties were studied. the copolymers were synthesized in the melt polymerization melted from diacetoxynaphthalene isomers, ${\alpha},{\omega}bis(4-carboxyphenoxy)$ alkanes and p-acetoxy benzoic acid in the molar ratio of 1:1:2 and characterized for the effects of structure of naphthalenediol isomer moieties and the spacers on thermal crystalline and liquid crystalline properties of the resulting polymers. Diacetoxy naphthalene isomers were used 1. 5-,1. 6-,2. 6-and 2. 7-disubstituted ones and the spacers was either tetramethylene or decamethylene. The polymer was characterized by elemental and spectropic analysis, differential scanning calorimetry (DSC) on a polaring microscope, wide-angle X-ray diffractometry and thermogravimetry (TGA). There glass transition temperatures (Tg) and melting temperature (Tm) on the structure of the naphthalenediol isomer moieties and the length of the spacers. The presence of spacers was found to the helpful in crystallization of 1. 6-naphthalenediol copolyesters. The presence of amide group in the backbone chain of polymer was found to increase transition temperature, crystallization, thermal stability of polymers but to decreas solubility.

• 한국산학기술학회논문지
• /
• 제15권1호
• /
• pp.575-580
• /
• 2014

단위체로서 4-[4-(4-hydroxyphenoxy)butoxy]benzoic acid (HBBA)와 p-hydroxy benzoic acid (HBA)를 사용하여 직접 중축합방법에 의해 액정 공중합체를 합성하였다. 합성된 중합체의 구조와 성질은 $^1H$-NMR, FT-IR, DSC, TGA, POM에 의하여 조사되었다. 연구결과에 의하면, 페놀/p-클로로페놀/1,1,2,2-테트라클로로에탄 (25/40/35=w/w/w) 내에서 측정된 중합체의 고유점성도 (${\eta}_{inh}$)는 0.77~1.60 dL/g로 측정되었으며, 중합체 P-80을 제외하고, 공중합체들의 전이온도와 액정상의 범위는 HBA의 양이 증가함에 따라 증가하였다. 중합체의 이러한 특성은 중합체 사슬의 불규칙성과 강직성이 증가하였기 때문으로 생각된다.

• Journal of Microbiology and Biotechnology
• /
• 제9권6호
• /
• pp.847-853
• /
• 1999

A Pseudomonas sp. strain that is capable of utilizing dicarboxylic acids as a sole carbon source was isolated from activated sludge by using the enrichment culture technique. This organism accumulated polyhydroxyalkanoates (PHAs) with an unusual pattern of monomer units that depends on the carbon sources used. Polyhydroxybutyrate (PHB) homopolyester was synthesized from glucose or small $C_{-even}$ alkanoic acids, such as butyric acid and hexanoic acid. Accumulation of PHB homopolyester was also observed in the cells grown on $C_{-odd}$ dicarboxylic acids, such as heptanedioic acid and nonanedioic acid as the sole carbon sources. In contrast, a copolyester consisting of 6 mol% 3-hydroxybutyrate (3HB) and 94 mol% 3-hydroxyvalerate (3HV) was produced with a PHA content of as much as 36% of the cellular dry matter. This strain produced PHAs consisting both of the short-chain-length (SCL) and the medium-chain-length (MCL) 3-hydroxyacid units when heptanoic acid to undecanoic acid were fed as the sole carbon sources. Most interestingly, polyester consisting of significant amount of relevant fractions, 3HB, 3HV, and 3-hydroxyheptanoate (3HHp), was accumulated from heptanoic acid. According to solvent fractionation experiments, the polymer produced from heptanoic acid was a blend of poly(3HHp) and of a copolyester of 3HB, 3HV, and 3HHp units. The hexane soluble fractions contained only 3HHp units while the hexane-insoluble fractions contained 3HB and 3HV units with a small amount of 3HHp unit. The copolyester was an elastomer with unusual mechanical properties. The maximum elongation ratio of the copolyester was 460% with an ultimate strength of 10 MPa, which was very different from those of poly(3HB-co-3HV) copolyesters having similar compositions produced from other microorganisms.