• 한국산업정보학회논문지
• /
• 제25권5호
• /
• pp.41-48
• /
• 2020

최근 가상/증강/혼합현실 분야의 이동 플랫폼 시장 수요 커지면서 가상환경을 이용한 다중 체험이 가능한 콘텐츠를 통해 사용자에게 실제 현장과 같은 느낌을 부여하는 체험형 콘텐츠가 주목받고 있다. 본 논문에서는 교육훈련생의 모션 캡쳐를 위한 가상공간 이동플랫폼에서 사용자 위치 추정을 위한 트래커의 추적하는 방법으로, 2차원 영상 평면에 투영된 마커의 좌표를 통한 3차원 교차 공분산의 3D 좌표 추정 방법을 제시한다. 또한, 강체 추적실험을 통해 제안한 알고리즘의 유효성을 검증하여 낮은 해상도의 카메라를 통해서도 3D 좌표 추정이 가능함을 보인다.

• 방송공학회논문지
• /
• 제24권5호
• /
• pp.765-774
• /
• 2019

본 논문에서는 다중 RGB-D 카메라의 포인트 클라우드 정합 알고리즘을 제안한다. 일반적으로 컴퓨터 비전 분야에서는 카메라의 위치를 정밀하게 추정하는 문제에 많은 관심을 두고 있다. 기존의 3D 모델 생성 방식들은 많은 카메라 대수나 고가의 3D Camera를 필요로 한다. 또한 2차원 이미지를 통해 카메라 외부 파라미터를 얻는 기존의 방식은 큰 오차를 가지고 있다. 본 논문에서는 저가의 RGB-D 카메라 8대를 사용하여 전방위 3차원 모델을 생성하기 위해 깊이 이미지와 함수 최적화 방식을 이용하여 유효한 범위 내의 오차를 갖는 좌표 변환 파라미터를 구하는 방식을 제안한다.

• 대한임베디드공학회논문지
• /
• 제18권6호
• /
• pp.303-310
• /
• 2023

A single vision system limits the ability to accurately understand the spatial constraints and interactions between robots and dynamic workers caused by gantry robots and collaborative robots during production manufacturing. In this paper, we propose a 3D pose registration method for dynamic workers based on a multi-domain vision system for safety monitoring in manufacturing environments. This method uses OpenPose, a deep learning-based posture estimation model, to estimate the worker's dynamic two-dimensional posture in real-time and reconstruct it into three-dimensional coordinates. The 3D coordinates of the reconstructed multi-domain vision system were aligned using the ICP algorithm and then registered to a single 3D coordinate system. The proposed method showed effective performance in a manufacturing process environment with an average registration error of 0.0664 m and an average frame rate of 14.597 per second.

• 스마트미디어저널
• /
• 제12권11호
• /
• pp.48-56
• /
• 2023

3차원 인체자세추정은 스포츠, 동작인식, 영상매체의 특수효과 등의 분야에서 널리 활용되고 있는 기술이다. 이를 위한 여러 방법들 중 다중 시점 3차원 인체자세추정은 현실의 복잡한 환경에서도 정밀한 추정을 하기 위해 필수적인 방법이다. 하지만 기존 다중 시점 3차원 인체자세추정 모델들은 3차원 특징 맵을 사용함에 따라 시간 복잡도가 높은 단점이 있다. 본 논문은 계산 복잡도가 적은 트랜스포머 기반 기존 단안 시점 다중 프레임 모델을 다중 시점에 대한 3차원 인체자세추정으로 확장하는 방법을 제안한다. 다중 시점으로 확장하기 위하여 먼저 2차원 인체자세 검출자 CPN(Cascaded Pyramid Network)을 활용하여 획득한 4개 시점의 17가지 관절에 대한 2차원 관절좌표를 연결한 8차원 관절좌표를 생성한다. 그 다음 이들을 패치 임베딩 한 뒤 17×32 데이터로 변환하여 트랜스포머 모델에 입력한다. 마지막으로, 인체자세를 출력하는 MLP(Multi-Layer Perceptron) 블록을 매 반복 마다 사용한다. 이를 통해 4개 시점에 대한 3차원 인체자세추정을 동시에 수정한다. 입력 프레임 길이 27을 사용한 Zheng[5]의 방법과 비교했을 때 제안한 방법의 모델 매개변수의 수는 48.9%, MPJPE(Mean Per Joint Position Error)는 20.6mm(43.8%) 감소했으며, 학습 횟수 당 평균 학습 소요 시간은 20배 이상 빠르다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권2호
• /
• pp.154-161
• /
• 2005

In the machine tool industry, direct drive linear motor technology is an interesting means to achieve high acceleration, and to increase reliability. This paper analyzes and compares the characteristics of a tubular linear motor with Halbach and radial magnet array, respectively. First, the governing equations are established analytically in terms of the magnetic vector potential and two dimensional cylindrical coordinate systems. Then, we derive magnetic field solutions due to the PMs and the currents. Motor thrust, flux linkage and back emf are also derived. The results are shown to be in good conformity with those obtained from the commonly used finite element method. Finally, control parameters are obtained from analytical solutions.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1707-1713
• /
• 2016

This paper proposes a dc error compensation algorithm using dq-synchronous coordinate transform digital phase-locked-loop in single-phase grid-connected converters. The dc errors are caused by analog to digital conversion and grid voltage during measurement. If the dc offset error is included in the phase-locked-loop system, it can cause distortion in the grid angle estimation with phase-locked-loop. Accordingly, recent study has dealt with the integral technique using the synchronous reference frame phase-locked-loop method. However, dynamic response is slow because it requires to monitor one period of grid voltage. In this paper, the dc offset error compensation algorithm of the improved response characteristic is proposed by using the synchronous reference frame phase-locked-loop. The simulation and the experimental results are presented to demonstrate the effectiveness of the proposed dc offset error compensation algorithm.

• Journal of the korean society of oceanography
• /
• 제32권1호
• /
• pp.17-27
• /
• 1997

Miami Isopycnic Coordinate Ocean Model is applied to the East Sea to estimate the renewal time of the upper Intermediate Water The model gives about 10 years of renewal time. Extrapolating this result to the whole water mass below, including the upper Intermediate Water, leads to about 81.4 years of renewal time, which is quite comparable to that obtained by Kim and Kim (1997) based on the recent observations. Deep winter mixing occurs in the north of the basin. The areas of the largest water mass conversion, from the upper mixed to the intermediate below, are along the periphery of the deep mixing zone. Large portion of the renewed Intermediate Water then advects along the Korean and Japanese coasts. It is concluded that the high-oxygen content Intermediate Water found off the Korean coast (Kim and Chung, 1984) is in part locally formed but mostly advected from the deep mixing zone.

• 한국전산유체공학회지
• /
• 제10권1호
• /
• pp.31-38
• /
• 2005

Three-dimensional flow over the sand dunes have been studied numerically by using Large-Eddy Simulation (LES) method. In the direction of initial flow and span direction cyclic boundary conditions are imposed for velocity and pressure. The movement of the sand dune which is formed by converging wind direction has been investigated. The numerical method employed in this study can be divided into three parts: (i) calculation of the air flow over the sand dune using standard MAC method with a generalized coordinate system; (ii) estimation of the sand transfer caused by the flow through the friction; (iii) determination of the shape of the sand surface. Since the computational area has been changed due to step (iii), (i)-(iii) are repeated. The simulated dune, which has initially elliptic cross section, extends at the converging direction, which is known as linear dunes.

• 전기학회논문지
• /
• 제60권5호
• /
• pp.942-948
• /
• 2011

This paper deals with characteristic analysis of axial flux permanent magnet (AFPM) machines with axially magnetized PM rotor using quasi-3-D analysis modeling. On the basis of magnetic vector potential and a two-dimensional (2-D) polar-coordinate system, the magnetic field solutions due to various PM rotors are obtained. In particular, 3-D problem, that is, the reduction of magnetic fields near outer and inner radius of the PM is solved by introducing a special function for radial position. And then, the analytical solutions for back-emf and torque are also derived from magnetic field solutions. The predictions are shown in good agreement with those obtained from 3-D finite element analyses (FEA). Finally, it can be judged that analytical solutions for electromagnetic quantities presented in this paper are very useful for the AFPM machines in terms of following items : initial design, sensitivity analysis with design parameters, and estimation of control parameters.

• Journal of information and communication convergence engineering
• /
• 제10권4호
• /
• pp.390-395
• /
• 2012

This paper describes an implementation of automatic mutual localization of swarm robots using a particle filter. Each robot determines the location of the other robots using wireless sensors. The measured data will be used for determination of the movement method of the robot itself. It also affects the other robots' self-arrangement into formations such as circles and lines. We discuss the problem of a circle formation enclosing a target that moves. This method is the solution for enclosing an invader in a circle formation based on mutual localization of the multi-robot without infrastructure. We use trilateration, which does require knowing the value of the coordinates of the reference points. Therefore, specifying the enclosure point based on the number of robots and their relative positions in the coordinate system. A particle filter is used to improve the accuracy of the robot's location. The particle filter is operates better for mutual location of robots than any other estimation algorithms. Through the experiments, we show that the proposed scheme is stable and works well in real environments.