• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.7-12
• /
• 2010

In this paper, we analyze and simulate the performance of a cooperative communication system adopting a maximum likelihood (ML) equalizer. In wireless communication systems, cooperative communication schemes employing several relays can be applied for extending the communication coverage. It is assumed that both relays and user terminals can move. Therefore, coverages of two or more relays can overlap each other. If wanted and interfering signals are transmitted through the same channel and there are one terminal in the overlapped region, its performance is degraded due to interference. Hence, we use a ML equalizer for rejecting the effect of interfering signal and enhancing the communication system performance. The cooperative system performance is evaluated in terms of bit error probability. From the simulation results, it is demonstrated that the ML receiver shows good interference cancellation performance although its complexity is high.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1590-1610
• /
• 2016

The challenge of penetrating obstacles along with impact from weak multipath effects makes 60GHz signal very difficult to be transmitted in non-line of sight (NLOS) channel. So 60GHz system is vulnerable to obstructions and thus likely results in link interruption. While the application of cooperative technology to solve link blockage problemin 60GHz system should consider the characteristic of directional transmission for 60GHz signal. Therefore in this paper a system is proposed to solve the link blockage problem in 60GHz NLOS communication environment based on the concept of cooperation and also the beamforming technology, which is the basis of directional transmission for 60GHz communication system. The process of anti-blockage solution with cooperative communication is presented in detail, and the fast switching and recovery schemes are well designed. The theoretical values of symbol error rate (SER) using decode and forward (DF) cooperation and amplify and forward (AF) cooperation are presented respectively when the common channel interference exists. Simulation results demonstrate that the performance based on DF cooperation is better than the performance based on AF cooperation when directional transmission is used.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.6
• /
• pp.1668-1688
• /
• 2012

Cooperative communications and network coding schemes have been proposed to increase system throughput for ad hoc networks. In this paper, we present throughput and delay analysis of the new network coding-enabled cooperative MAC protocol called NC-MAC, which has been proposed by us in order to significantly enhance system performance. This protocol introduces an approach that can accommodate both cooperative communication and network coding for wireless ad hoc networks by slightly increasing overhead and modifying standards. The protocol's performance is evaluated using mathematical analysis and computer simulation and two performance measures, system throughput and average channel access delay, are used for a performance comparison with previous schemes. It is assumed that all the frames exchanged over a wireless channel are susceptible to transmission errors, which is a new but more reasonable assumption differentiating this research from previous research. Numerical results show this protocol provides significantly enhanced system performance compared with conventional cooperative MAC protocols used in previous research. For instance, system performance is 47% higher using the NC-MAC protocol than when using the rDCF protocol.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.8
• /
• pp.3542-3566
• /
• 2018

In this paper, we investigate a buffer-aided wireless powered cooperative communication network (WPCCN), in which the source and relay harvest the energy from a dedicated power beacon via wireless energy transfer, then the source transmits the data to the destination through the relay. Both the source and relay are equipped with an energy buffer to store the harvested energy in the energy transfer stage. In addition, the relay is equipped with a data buffer and can temporarily store the received information. Considering the buffer-aided WPCCN, we propose two buffer-aided relaying protocols, which named as the buffer-aided harvest-then-transmit (HtT) protocol and the buffer-aided joint mode selection and power allocation (JMSPA) protocol, respectively. For the buffer-aided HtT protocol, the time-averaged achievable rate is obtained in closed form. For the buffer-aided JMSPA protocol, the optimal adaptive mode selection scheme and power allocation scheme, which jointly maximize the time-averaged throughput of system, are obtained by employing the Lyapunov optimization theory. Furthermore, we drive the theoretical bounds on the time-averaged achievable rate and time-averaged delay, then present the throughput-delay tradeoff achieved by the joint JMSPA protocol. Simulation results validate the throughput performance gain of the proposed buffer-aided relaying protocols and verify the theoretical analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.11
• /
• pp.3026-3045
• /
• 2012

In this paper, diversity-multiplexing tradeoff (DMT) of three-user wireless multiple-antenna cooperative systems is investigated in general fading channels when half-duplex and decode-and-forward relay is employed. Three protocols, i.e., adaptive protocol, receive diversity protocol, and dual-hop relaying protocol, are considered. The general fading channels may include transmit and/or receive correlation and nonzero channel means, and are extensions of independent and identically distributed Rayleigh or Rician fading channels. Firstly, simple DMT expressions are derived for general fading channels with zero channel means and no correlation when users employ arbitrary number of antennas. Explicit DMT expressions are also obtained when all users employ the same number of antennas and the channels between any two users are of the same fading statistics. Finally, the impact of nonzero channel means and/or correlation on DMT is evaluated. It is revealed theoretically that the DMTs depend on the number of antennas at each user, channel means (except for Rayleigh and Rician fading statistics), transmit and/or receive correlation, and the polynomial behavior near zero of the channel gain probability density function. Examples are also provided to illustrate the analysis and results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.1976-1996
• /
• 2011

Cognitive radio (CR) MAC protocol provides access control of unused spectrum resources without causing interference to primary users. To achieve this goal, in this paper a TDMA based cooperative multi-channel cognitive radio MAC (MCR-MAC) protocol is proposed for wireless ad hoc networks to provide reliable protection for primary users by achieving cooperative detection of incumbent system signals around the communication pair. Each CR node maintains transmission opportunity schedules and a list of available channels that is employed in the neighbor discovery period. To avoid possible signal collision between incumbent systems and cognitive radio ad hoc users, we propose a simple but efficient emergency notification message exchanging mechanism between neighbor CR nodes with little overhead. Our simulation results show that the proposed MCR-MAC can greatly reduce interference with primary users and remarkably improve the network throughput.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.711-716
• /
• 2003

This study considers the implementation issues of the inter-vehicle communication system for the vehicle platoon experiments via a testbed. The testbed, which consists of three scale vehicles and one RCS(remote control station), is developed as a tool for functions evaluation between simulation studies and full-sized vehicle researches in the previous study. The cooperative communication of the vehicle-to-vehicle or the vehicle-to-roadside plays a key role for keeping the relative spacing of vehicles small in a vehicle platoon. The static platoon control, where the number of vehicles remains constant, is sufficient for the information to be transmitted in the suitably fixed interval, while the dynamic platoon control such as merge or split requires more flexible network architecture for the dynamical coordination of the communication sequence. In this study, the wireless communication device and the reliable protocol of the flexible network architecture are implemented for our testbed, using the low-cost, ISM band transceiver and the 8-bit microcontroller.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.45-49
• /
• 2011

Cooperative multihop communications support effective transmissions over underwater acoustic channels as inferior wireless channels. But the performance of cooperative multihop systems may degrade due to the lack of cooperative nodes at the initial operation time duration. At the initial time duration, the lack of cooperative nodes causes more errors, and the multihop network propagates these errors. In this paper, we apply fountain code to the cooperative multihop system at the initial time duration, and show performance improvements by simulations.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.65-71
• /
• 2016

Cooperative relaying systems have been studied actively to improve the system performance effectively in wireless fading channels. Most of the cooperative relay studies are assumed fixed relay, recently the performance analysis of the cooperative relaying systems with spatially random relays considering the practical mobile environment are introduced. However the comparative studies for relay selection methods of incremental cooperative relay systems, the performance of which is influenced by the selection methods, have not been studied. Therefore we derive the performance of the system which has MRC(Maximal-ratio combining) with Max SNR(signal-to-noise ratio) selection or Max-min SNR selection, respectively. And the outage performances of the system with Max or Max-min selection method are compared for different transmit power allocation to the source and to the relays. The analytical results serve as useful tools for relay selection and power allocation to transmit nodes for opportunistic incremental relaying systems.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.12
• /
• pp.455-462
• /
• 2014

In recent years, various services in mobile environments due to the growth of mobile devices and related techniques like wireless networks. Furthermore, as the increasing communication traffic in cellular networks has become a new significant issue, many studies for device-to-device(D2D) communication and D2D-based cooperative services have been performed recently. In this paper, we design a smart agent system for D2D-based cooperative services and propose a dynamic service binding method based on service ontology. We classify roles of mobile devices for cooperative services by defining three types of smart agents, and construct a knowledge base in order to describe properties of 'service' unit. The proposed knowledge model, D2D cooperative service ontology, can enable a autonomous cooperative services between mobile devices by binding a requested service to the appropriate member device according to the real-time context in mobile environments.