• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.71-76
• /
• 2009

The clean non-contact type conveyor system for vertical transfer of large size FPD(Flat Panel Display) glasses has been installed at FPD production line just since a few years ago. The most important part of the conveyor is the 3 axis permanent magnet rollers faced orthogonally in pairs. However, the systematic design method about it has not been proposed yet. In this paper, we studied a design analysis for determining geometrical parameters of the magnetic roller by using a commercial FEM tool of the 3D Maxwell. Through a series of simulation, we obtained the relationship of several geometrical parameters affecting the torque of the conveyor.

• 제어로봇시스템학회논문지
• /
• 제4권2호
• /
• pp.226-234
• /
• 1998

The concept of dynamic tracking line is proposed as the feasible tracking region for a robot in a robot-conveyor system, which takes the conveyor speed into consideration. This paper presents an effective method to identify the dynamic tracking line in a robotic workcell. The maximum line speed of a robot is derived in an analytic form using the parameterized dynamics and kinematics of the manipulator, and some of its properties are established mathematically. The identification problem of the dynamic tracking line is then formulated as a root-solving problem for a single-variable equation, and solved by using a simple numerical technique. Finally, numerical examples are presented to demonstrate the methodology and its applications in workspace specification.

• 한국정보통신학회논문지
• /
• 제15권5호
• /
• pp.1119-1124
• /
• 2011

전류 컨베이어 회로의 동작은 연산증폭기와 유사하며, 우수한 선형성과 안정성을 가지고 있다. 이 논문에서는 전류 컨베이어 회로를 이용하여 주파수 신호를 아날로그 전압 신호로 변환하는 회로를 설계하였다. 회로는 공급전압 5volts에서 동작하도록 설계하였으며, HSPICE 시뮬레이션을 통하여 결과를 분석하였다. 회로의 동작 범위는 4kHz 이상 200kHz 이하의 주파수에서 출력 전압의 에러는 +2.5% ~ -1.3% 이내 이었다.

• 한국정보처리학회논문지
• /
• 제3권1호
• /
• pp.1-8
• /
• 1996

골판지 제조업체의 특성은 다품종 소량 가공산업이며, 단납기, JIT(Just In Time) 성의 산업으로서 고객의 서비스 요구를 충족시키며 기업의 이윤을 극대화하기 위해서 는 무엇보다도 철저한 물류 유통관리를 통한 물류비 절감이 중요하다. 특히 공장 내부에서 물류는 각 공정들의 가동율 및 생산성 향상에 막대한 영향을 미치고 있다. 최근 골판 지 제조업체들은 공정간의 물류를 효율적으로 운영하여 가동율을 높이고, 공정사의 재고 를 최소화시키는 역할을하는 컨베이어 시스템에 관심을 갖게 되었다. 그런데 본 사례 의 컨베이어 시스템은 컨베이서의 적체와 종종 수작업 운영으로 인하여 시스템의 목적을 달성할 수 없는 문제점이 발견되었다. 제조시스템의 성능평가에는 경제적, 정성적, 그리고 기술적 평가방법이 있다. 본 연구는 기술적 평가방법중 시뮬레이션을 통하여 골판지 제조업체의 컨베이어 시스템의 성능을 평가 하는 것이다. 컨베이어 시스템에서 고루게이터 및 제상기 공정의 가동율, 컨베이어의 적재율의 문제점을 해결하는 각 대안에 대한 시뮬레이션을 통하여 예상 적재량, 공정들의 가동율 등의 결과를 분석하 였다. 최적방안으로 컨베이어를 추가 설치하고, 공정들의 가동시간을 조정하는 대안을 제시하였다.

• Journal of Biosystems Engineering
• /
• 제30권4호
• /
• pp.220-228
• /
• 2005

This study was conducted to investigate the main factors that contain a rotating velocity ratio between wheel and conveyor belt, a tilt angle of conveyor belt and a rotating velocity of a dick cutter for mechanization of Chinese leek harvest. In the survey on the cultivation of Chinese leek, row spacing of 350 m and cutting height of 10 mm from the ground were set up for field tests. Test equipment was designed to cut, pick up and convey Chinese leek one row by one row. From the results of material tests, pick-up height of conveyor belt was set up at $60\~90m$ from the bottom, and the strain and stress at rupture of Chinese leek was 0.487 m/m and 0.01078 MPa. An elastic coefficient of the rubber (Neoprene) of conveyor belts was 1.1077 under the strain of 0.3 nym. from the results of field tests, the tilt angle of conveyor belt was the range of $25^{\circ}\~30^{\circ}$ under consideration far space of container, the velocity ratio between vehicle and conveying belt was 1 to 2.4~1.7 at 0.1~0.3 m/s of vehicle, and optimum rotating velocity of the disk cutter was 34.8 m/s or more under consideration for soil friction.

• Journal of Biosystems Engineering
• /
• 제38권3호
• /
• pp.215-221
• /
• 2013

Purpose: Opuntia Humifusa has been used in the food and beauty industry after removing spines and glochids clearly. This study compared the methods used in removing spines and analyzed the design factors for developing a spine removal device. Method: This study compared the spine removal ratios in accordance with the length of brush, water spray pressure, the number of water spray, and the size of Opuntia Humifusa in a rotating brush device and a water spray device. In addition, this study compared the reversal ratios according to the inclination angle of a conveyor, the drop height of Opuntia Humifusa, and the speed of the conveyor to analyze the reversal factors. Results: The spines were not removed clearly in the rotating brush method, and the glochids were nailed deeply. The spine removal ratio was 96.9% with the water spray pressure of 20 $kgf/cm^2$ and the conveyor speed of 10 cm/s in the water spray method. The number of water spray was correlated with the spine removal ratio, and the average spine removal ratio was 95.6% with three cycles of water spray. The reversal ratio was 97% with the inclination angle of the conveyor $20^{\circ}$, the drop height of 380 mm, and the conveyor speed of 10 cm/s. Conclusions: In order to develop a Opuntia humifusa spine removing device, this study compared the rotating brush and water spray methods. As a result, each spine removal performance of the rotating brush and water spray methods was 96.9% and 95.6%, respectively. Although the performance of the rotating brush method was slightly higher than that of the water spray method, the water spray method was suitable for removing spines from stem because the epidermis of stem was damaged and the glochids were nail deeply in the rotating brush method. Further studies on appropriate arrangement of spray nozzles, maintaining the optimal water spray pressure, the speed and angle control of the feeding conveyor, and devices for inducing the stem to the center will be needed in combining the water spray device and the reversal device.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1119-1120
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.179-180
• /
• 2009

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1998년도 추계학술대회 및 정기총회
• /
• pp.174-177
• /
• 1998

컴퓨터를 이용한 시뮬레이션 소프트웨어는 현재 많은 분야에서 이용되고 있으며, 본 논문에서는 제조 및 물류 전용 3차원 소프트웨어인 AutoMod를 사용하여 우편집중국의 트레이 컨베이어(Tray Conveyor) 시스템을 모델링하고, 예상되는 각 물동량에 따른 시뮬레이션 결과 분석을 통하여 컨베이어 시스템의 성능 분석 과정에 대하여 기술한다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제20권E1호
• /
• pp.1-14
• /
• 2004

Meteorological mechanisms in association with long-range transport of Asian dust in April 2001 have been investigated using weather maps, satellite images, TOMS and surface $PM_{10}$ data, backward trajectories, plus modeling output results (geopotential heights, horizontal wind vectors, potential temperatures, and streamlines). The results indicated that long -range transport of Asian dust to the west coast of North America was associated with strong westerlies between the Aleutian low and the Pacific high acting as a conveyor belt. Accelerating westerly flows due to cyclogenesis at the source regions over East Asia transported pollution from the continent to the central Pacific. When the system reached the Aleutian Islands, the intensity of troughs and the westerlies were amplified in the North Pacific. Thereafter the winds between the Aleutian Islands and the Pacific Ocean were more intensified from the air flow transport of the conveyor belt. Consequently, the strong wind in the conveyor belt enhanced the dust transport from the Pacific Ocean to the west coast of North America. This was evidenced by $PM_{10}$ concentration (maximum of about $100{\mu}g\;m^{-3}$) observed In California. Further evidence of the dust transport was found through the observation of satellite images, the distribution of TOMS aerosol index, and the analyses of streamlines and backward trajectories.