• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.488-496
• /
• 2018

This study examined the Gangwon Province's current implementation of its elimination of invasive plants and explored a plan to effectively manage invasive plants. The percentage of the distribution of the plants was 39.6% for riverside areas, 23.3% for roadside areas, 12.4% for roadside & riverside areas, and 4.6% for areas around farm land and river banks. To ensure the systematic management of invasive plants, the current study suggests a) developing an invasive plants monitoring and management system; b) reinvigorating the participation of residents, private organizations, and military posts; c) planting of native replacement plants and the conversion of the locations as attractions, and d) nurturing the project for using invasive plants. For policy directions to be pursued based on the results of the study, the following are suggested: a) improving laws and systems regarding invasive plants, b) developing a cooperative system for managing invasive plants, c) implementing the training of civilian professionals, d) implementing the elimination of invasive plants, e) developing replacement plants for cities and counties, f) fostering industries that tap into invasive plants, and g) using the Han River Water System Management Fund for funding and greater efficiency.

• Journal of Climate Change Research
• /
• v.4 no.4
• /
• pp.349-358
• /
• 2013

In this study, the newest technology available to reduce GHG emissions, which can be applicable in energy industries of the future that has large reduction obligations by energy target management and large intensity of GHG emissions, has been investigated by searching the technical characteristics of each technology. The newest technology to reduce GHG emissions in the field of power generation and energy can be mainly classified into the improvement of efficiency, CCS, and gas combined-cycle technology. In order to improve the reliability of the GHG emission factor obtained from the investigation process, it has been compared to the technology-specific GHG emission factor derived from the estimated amount of emissions. Then the GHG abatement measures, using the derived estimation of factor, by using the newest technology to reduce GHG emissions have been predicted. As a result, the GHG reduction rate by technology of CCS development has been expected to be the largest more than 30%, and the abatement rate by technology of coal gasified fuel cell and pressurized fluidized-bed thermal power generation has been showed more than 20%. If the effective introduction of the newest technology and the study of its characteristics is continued, and properly applied for future GHG emissions, it can be prospected that the national GHG reduction targets can be achieved in cost-efficient way.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1006-1011
• /
• 2018

This paper proposes a three level buck converter utilizing multi-bit flying capacitor voltage control. The conventional three-level buck converter can not control the flying capacitor voltage, so that the operation is unstable or the circuit for controlling the flying capacitor voltage can not be applied to the PWM mode. Also when the load current is increased, an error occurs in the inductor voltage. The proposed structure can control the flying capacitor voltage in PWM mode by using differential difference amplifier and common mode feedback circuit. In addition, this paper proposes a 3bit flying capacitor voltage control circuit to optimize the operation of the three level buck converter depending on the load current, and a triangular wave generation circuit using the schmitt trigger circuit. The proposed 3-level buck converter is designed in $0.18{\mu}m$ CMOS process and has an input voltage range of 2.7V~3.6V and an output voltage range of 0.7V~2.4V. The operating frequency is 2MHz, the load current range is 30mA to 500mA, and the output voltage ripple is measured up to 32.5mV. The measurement results show a maximum power conversion efficiency of 85% at a load current of 130 mA.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.3
• /
• pp.373-381
• /
• 2019

Site-directed mutagenesis was employed to generate five different triple point mutations in the double mutant (C295A/I86A) of Thermoanaerobacter ethanolicus alcohol dehydrogenase (TeSADH) by computer-aided modeling with the aim of widening the small alkyl-binding pocket. TeSADH engineering enables the enzyme to accept sterically hindered substrates that could not be accepted by the wild-type enzyme. The underline in the mutations highlights the additional point mutation on the double mutant TeSADH introduced in this work. The catalytic efficiency ($k_{cat}/K_M$) of the ${\underline{M151A}}$/C295A/I86A triple TeSADH mutant for acetophenone increased about 4.8-fold higher than that of the double mutant. A 2.4-fold increase in conversion of 3'-methylacetophenone to (R)-1-(3-methylphenyl)-ethanol with a yield of 87% was obtained by using ${\underline{V115A}}$/C295A/I86A mutant in asymmetric reduction. The ${\underline{A85G}}$/C295A/I86A mutant also produced (R)-1-(3-methylphenyl)-ethanol (1.7-fold) from 3'-methylacetophenone and (R)-1-(3-methoxyphenyl)-ethanol (1.2-fold) from 3'-methoxyacetophenone, with improved yield. In terms of thermal stability, the ${\underline{M151A}}$/C295A/I86A and ${\underline{V115A}}$/C295A/I86A mutants significantly increased ${\Delta}T_{1/2}$ by $+6.8^{\circ}C$ and $+2.4^{\circ}C$, respectively, with thermal deactivation constant ($k_d$) close to the wild-type enzyme. The ${\underline{M151A}}$/C295A/I86A mutant reacts optimally at $70^{\circ}C$ with almost 4 times more residual activity than the wild type. Considering broad substrate tolerance and thermal stability together, it would be promising to produce (R)-1-(3-methylphenyl)-ethanol from 3'-methylacetophenone by ${\underline{V115A}}$/C295A/I86A, and (R)-1-phenylethanol from acetophenone by ${\underline{M151A}}$/C295A/I86A mutant, in large-scale bioreduction processes.

• Journal of Animal Science and Technology
• /
• v.62 no.6
• /
• pp.824-839
• /
• 2020

The current study was aimed to examine the effect of partial or complete replacement of fishmeal (FM) with fermented soybean meal (FSBM) on growth performance, fecal composition, and meat quality in broiler chickens. A total number of 240 one-day-old broiler chicks were randomly allotted into four dietary treatments with six replications and ten birds per one pen. Dietary treatments were followed as; 1) Diet incorporated with 4% FM without FSBM (Control), 2) Diet incorporated with 3% FM and 2% FSBM (FSBM2), 3) Diet incorporated with 2% FM and 3% FSBM (FSBM3) and 4) Diet incorporated with 4% FSBM without FM (FSBM4). Body weight and feed intake were recorded weekly for 35 days of the experimental period. Moreover, fecal samples were collected to evaluate moisture, ash, nitrogen, calcium and phosphorus content on day 21 post-hatch. On day 35, two birds were sacrificed from each pen to measure meat quality parameters and visceral organ weights. Results revealed that, no dietary treatment effect (p > 0.05) was observed either in both body weight or average daily gain of broilers within the entire experimental period while broilers fed FSBM2 increased (p < 0.05) average daily feed intake by 10.07% whereas FSBM4 improved (p < 0.05) feed efficiency ratio by 8.45% compared to birds fed other dietary treatments on day 7 post-hatch. Besides, birds fed FSBM3 obtained the improved (p < 0.05) feed conversion ratio over the birds fed control diet by 7.51% from hatch to day 35 post-hatch (1.60 vs. 1.73). Nevertheless, no difference (p > 0.05) was detected on visceral organ weight, proximate composition and physicochemical characteristics of meat while broilers offered FSBM4 obtained the lowest (p < 0.05) calcium and phosphorous in faces (2.27% and 1.21% respectively) over those offered control feed and other FSBM treatments. In conclusion, FSBM would be a better replacement for ousting FM partially or completely in broiler diet as it did not impair the growth performance and meat quality while reducing the calcium and phosphorous excretion in broilers for 35 days post-hatch.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.7
• /
• pp.57-65
• /
• 2011

Numerical simulations by three-dimensional Particle Flow Code($PFC^{3D}$, Itasca) considering distinct element method (DEM) were carried out for prediction of triaxial compression test with sand material. The effect of scale conditions for numerical model and distinct material on final prediction results was analyzed by numerical models under various scale conditions, and following observations were made from the numerical experiments. It is very useful to model the initial material condition without any porosity conversion from 2-D to 3-D DEM. Numerical experiments have shown that in all cases considered, 3D distinct element modeling could provide good agreement on stress-strain behavior, volume change and strength properties with laboratory testing results. It was important thing to assess reasonable scale ratio of numerical model and distinct elements for saving calculation time and securing calculation efficiency under condition with accuracy and appropriateness as numerical laboratory. As results of DEM simulations under various scale conditions, most of results show that shear strength properties as cohesion and internal friction angle are similar in condition of $D_{mod}/D_{gmax}$ < 10. It shows that 3-D distinct element method could be used as efficient tool to assess strength properties by numerical laboratory technique.

• Microbiology and Biotechnology Letters
• /
• v.49 no.4
• /
• pp.559-565
• /
• 2021

This study aimed to optimize gamma-aminobutyric acid (GABA) production by employing five strains of lactic acid bacteria (LAB) that were capable of high cell growth and GABA production using a modified synthetic medium. GABA production in the strains was qualitatively confirmed via detection of colored spots using thin layer chromatography. Lactobacillus plantarum SGL058 and Lactococcus lactis SGL027 were selected as the suitable strains for GABA production. The conditions of the carbon and nitrogen sources were determined as 5 g/l glucose (L. plantarum SGL058), 5 g/l lactose (L. lactis SGL027), 10 g/l yeast extract (L. plantarum SGL058), and 20 g/l yeast extract (L. lactis SGL027) for GABA production. The cell growth, monitored by optical density at 600 nm, was 5.93 for L. plantarum SGL058. This value was higher than the 3.04 produced by L. lactis SGL027 at 36 h using a 5-L fermenter. The highest concentration of GABA produced was 546.7 ㎍/ml by L. plantarum SGL058 and 404.6 ㎍/ml by L. lactis SGL027, representing a GABA conversion efficiency of (%, w/w) of 4.0% and 3.4%, respectively. The fermentation profiles of L. plantarum SGL058 and L. lactis SGL027 provide a basis for the utilization of LAB in GABA production using a basal synthetic medium.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.3
• /
• pp.251-258
• /
• 2022

In the cement industry, in order to reduce CO₂ emissions, technology for raw materials substitution and conversion, technology for improving process efficiency of utilizing low-carbon new heat sources, and technology for collecting and recycling process-generated CO₂ are being developed. In this study, we conducted a basic experiment to contribute to the development of CSC that can store CO₂ as carbonate minerals among process-generated CO₂ capture and recycling technologies. Three types of CSC clinker with different SiO₂/(CaO+SiO₂) molar ratios were prepared with the clinker raw material formulation, and the characteristics of the clinker were analyzed. As a result of analysis and observation of CSC clinker, wollastonite and rankinite were formed. In addition, as a result of the carbonation test of the CSC paste, it was confirmed that calcite was produced as a carbonation product. The lower the SiO₂/(CaO+SiO₂) molar ratio in the CSC clinker chemical composition, the lower the wollastonite production amount, and the higher the rankinite production amount. And the amount of calcite production increased with the progress of carbonation of the CSC paste specimen. It is judged that rankinite is more reactive in mineralizing CO₂ than wollastonite.

• Korean Journal of Poultry Science
• /
• v.49 no.2
• /
• pp.61-67
• /
• 2022

The effects of dietary exogenous hydrophilic emulsifiers on the growth, nutrient digestibility, and carcass characteristics of broilers were evaluated. A total of 200 one-day-old broilers (Ross 308) were allotted to one of four treatment groups in a randomized complete block design in five replicates with 10 birds per pen during a 5-week growth experimental period. Birds were fed a corn-soybean meal-based diet with or without the addition of 0.025, 0.050, or 0.075% exogenous hydrophilic emulsifiers. The diets contained 3,025 and 3,075 metabolizable energy/kg for Phases 1 and 2, respectively. For each phase and the overall experimental period, body weight gain (linear, P<0.05) and feed conversion ratio (linear, P<0.05) improved in proportion to the dietary exogenous hydrophilic emulsifier level, while the average daily feed intake was not affected by dietary treatment. Improvement in growth performance by dietary treatments was observed during the last two weeks rather than the first three weeks of the growth phase. In carcass traits, abdominal fat content increased as dietary exogenous hydrophilic emulsifier level increased (linear, P<0.05), whereas dietary emulsifier level did not affect the relative weight of the liver, breast, and leg muscles. In conclusion, addition of dietary exogenous hydrophilic emulsifiers from 0 to 0.075% in broiler diets improved the growth rate and feed efficiency of broilers without any deleterious effects on nutrient digestibility, although a corn-soybean meal-based diet had less energy content (3,025 and 3,075 metabolizable energy/kg) for 0-3 weeks and 3-5 weeks, respectively.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.4
• /
• pp.105-114
• /
• 2022

As the national income level is improving, housing urbanization and economic speed are progressing rapidly, household waste and food waste are rapidly increasing. The "Waste Management Act" (founded in 1991) introduced the volume-based household waste system in 1995, and even after implementation, the odor of food waste and the prompt disposal process continue to be a social problem.For this reason, the food waste recycling business is attracting attention. In this paper, regarding the role of resource recycling such as feed, compost, and other resources of food waste, this thesis aims to reduce the inefficiency of the recycling process. Data Envelopment Analysis (DEA) of the relationship between inputs and outputs of 33 facilities nationwide, excluding facility data (insufficient) among 394, (238 public, and 156 private ones), as of the end of 2020, which is running a domestic resource recycling project This study was conducted to investigate the important role in the relative management performance of food waste recycling facilities.It was hypothesized that the influence of business history, facility capacity, capital, and machinery of a company running a food waste recycling business on sales was tested.