• Applied Microscopy
• /
• v.28 no.2
• /
• pp.171-180
• /
• 1998

In the present study, the vacuolar apparatus were investigated in the hepatocytes of rats treated with DA by transmission electron microscopy of conventional and cytochemical thin sections. In the rats after 20 min of dehydrocholic acid treatment, the cis Golgj cisterns were sacculated in line. The saccule occasionally occured by elongation and attenuated neck. The lysosomes also showed protrudent saccule. The vesicles were observed near the cis Golgi cisterns, lysosome and bile canaliculi. Some of the vesicles appeared to be fused to bile canaliculi. The cis Golgi cisterns usually faced toward the bile canaliculi both in normal and experimental groups. The cis Golgi cisterns, protrudent saccule and vesicles were almost devoid of visible contents. The osmium deposits were heavy on the protrudent saccule as well as on the cis Golgi cisterns or on the vesicles isolated near by, but they were light or not observed on the vesicles in the immediate vicinity of bile canaliculi. The acid phosphatase activities appeared on the lysosome and vesicles located near by, but did not appear on the vesicles as approaching closer to the bile canaliculi. The evidence suggests that the vesicles are derived from the cis Gogi cistern and lysosomes and fuse to bile canaliculi for exocytosis, and that the activity in the vesicles is diminished as approaching closer to the bile canaliculi.

• Journal of Genetic Medicine
• /
• v.7 no.2
• /
• pp.156-159
• /
• 2010

Inversion, one of the balanced rearrangements, usually does not lead to phenotypic abnormalities; all genetic information exists in the proper amount, merely in a different order or in an abnormal location. However, offspring of an inversion carrier is at risk of chromosomal imbalance because an inversion loop can be formed during crossing-over of the paternal and the maternal chromosomes in meiosis. We report a 38-year-old woman with inversion and balanced translocation and her fetus with unusual rearrangement causing chromosomal imbalance. We performed conventional cytogenetic analysis, MLPA, and subtelomeric FISH in the cells of the embryo. The results showed that the distal portion of chromosome 13q was added to the terminal portion of chromosome 9p during crossing-over. Therefore, the final karyotype of the fetus was 46,XY,rec(9)t(9;13)(p22;q32)inv(9)(p12q13)mat, confirmed using molecular-cytogenetic analyzing tools.

• Clinics in Orthopedic Surgery
• /
• v.10 no.4
• /
• pp.439-447
• /
• 2018

Background: Since open Wiltse approach allows limited visualization for foraminal stenosis leading to an incomplete decompression, we report the short-term clinical and radiological results of unilateral biportal endoscopic foraminal decompression using $0^{\circ}$ or $30^{\circ}$ endoscopy with better visualization. Methods: We examined 31 patients that underwent surgery for neurological symptoms due to lumbar foraminal stenosis which was refractory to 6 weeks of conservative treatment. All 31 patients underwent unilateral biportal endoscopic far-lateral decompression (UBEFLD). One portal was used for viewing purpose, and the other was for surgical instruments. Unilateral foraminotomy was performed under guidance of $0^{\circ}$ or $30^{\circ}$ endoscopy. Clinical outcomes were analyzed using the modified Macnab criteria, Oswestry disability index, and visual analogue scale. Plain radiographs obtained preoperatively and 1 year postoperatively were compared to analyze the intervertebral angle (IVA), dynamic IVA, percentage of slip, dynamic percentage of slip (gap between the percentage of slip on flexion and extension views), slip angle, disc height index (DHI), and foraminal height index (FHI). Results: The IVA significantly increased from $6.24^{\circ}{\pm}4.27^{\circ}$ to $6.96^{\circ}{\pm}3.58^{\circ}$ at 1 year postoperatively (p = 0.306). The dynamic IVA slightly decreased from $6.27^{\circ}{\pm}3.12^{\circ}$ to $6.04^{\circ}{\pm}2.41^{\circ}$, but the difference was not statistically significant (p = 0.375). The percentage of slip was $3.41%{\pm}5.24%$ preoperatively and $6.01%{\pm}1.43%$ at 1-year follow-up (p = 0.227), showing no significant difference. The preoperative dynamic percentage of slip was $2.90%{\pm}3.37%$; at 1 year postoperatively, it was $3.13%{\pm}4.11%$ (p = 0.720), showing no significant difference. The DHI changed from $34.78%{\pm}9.54%$ preoperatively to $35.05%{\pm}8.83%$ postoperatively, which was not statistically significant (p = 0.837). In addition, the FHI slightly decreased from $55.15%{\pm}9.45%$ preoperatively to $54.56%{\pm}9.86%$ postoperatively, but the results were not statistically significant (p = 0.705). Conclusions: UBEFLD using endoscopy showed a satisfactory clinical outcome after 1-year follow-up and did not induce postoperative segmental spinal instability. It could be a feasible alternative to conventional open decompression or fusion surgery for lumbar foraminal stenosis.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.116-121
• /
• 2012

Cordyceps and its allies fungi has been described as a secret medicine that gives eternal youth and a long life. Some species of Cordyceps are sources of biochemicals, such ascordycepin, with interesting biological and pharmacological properties. Hence, it has been studied to uncover its pharmacological effect. We attempted to study the formation of fruiting bodies and to develop means of mass production Korean isolate of Paecilomyces tenuipes has been inoculated into silkworms, where it reproduced using culture container, mini-kit successfully. Culture container, mini-kit is composed of a cylinder-shaped body and lid. The container is made of translucent polyethylene terephthalate. The size of the container is $82{\times}75mm$, reduced by 10 times as compared with the conventional culture kit. The mini kit has many advantages - high culture amount, ability of maintaining optimal humidity, parasite-free cultivation and high-end appearance. With the kit, the optimal cultivation condition is under $22^{\circ}C$, culture period of 53 days. And synnemata of P. tenuipes could be kept fresh for 14 days at the temperature of under $10^{\circ}C$. Therefore, the Min-kit can be used in both ways as a culture container and a packing kit for end-user customers.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.20 no.6
• /
• pp.367-375
• /
• 2020

Background: Intraosseous anesthesia (IO) allows the anesthetic solution to be injected directly into the cancellous bone. The anesthetic solution immediately reaches the periapical region, and thus the axonal area of the nerve, where it can temporarily disable the sodium pump. The effect is felt almost without any time delay, and only a small amount of anesthetic solution is required. Methods: This study aims to investigate the efficacy of IO using the AnestoⓇ device after infiltration anesthesia (IA) and/or inferior alveolar nerve block anesthesia (IANB) failed to work in symptomatic irreversible pulpitis (hot tooth). The 33 patients included in the study were treated additionally with 1.7 ml articaine hydrochloride with 1:100,000 epinephrine hydrochloride (UltracainⓇ D-S, Sanofi-Aventis, Frankfurt, Germany) IO. Results: The electrical pulp test showed that 95.76% of the volunteers reacted positively to the combination of IANB or IA with the IO. In women, the additive IO was effective at 97.22%. In men, the IO led to pain elimination in 94.00% of cases. The duration of the IO was less than a quarter of an hour (13.03 min). The IO worked longer in women than in men (13.61 min vs. 12.33 min). Overall, more than every third tooth that needed trepanation was located in the posterior area of the mandible (36.4%). Treatment of hot teeth in this area was associated with an increased pulse rate and increased residual pain. There was a moderate correlation (Spearman-Rho [IRI] = 0.280) between the Visual Analog Scale (VAS) score and bone density, and a significant correlation (IRI = 0.612) between subjective residual pain and bone width. The IO resulted in a moderate, transient increase in the pulse rate by approximately 20 bpm. This is similar to the temporary increase in heart rate after conventional anesthesia techniques in non-preloaded patients and can be considered clinically irrelevant. Conclusion: IO with the AnestoⓇ device as an extension and deepening of local pain elimination is recommended for the treatment of hot teeth.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.6
• /
• pp.47-54
• /
• 2020

The acupressure is a treatment that applies pressure to certain parts of the body and has been mainly used for pain relief in the field of oriental medicine. However, the treatment effect is often different depending on the practitioner's ability, experience, and physical strength, so standardized acupressure is needed. In this regard, the equipment is being released, but this is mainly a rolling massage method, which reduces energy concentration and poses a risk of injury. Therefore, in this study, a device that provides vertical acupressure based on variable bogie (wheel truck) was implemented. As a result of experimenting with load and body pressure distribution and desirability to validate the device's bearing pressure, the acupressure rod held up to 150kg, the body pressure ratio was measured lower than the body pressure ratio of the comparison item in section 0%

• Korean Journal of Pharmacognosy
• /
• v.53 no.4
• /
• pp.226-233
• /
• 2022

Ephedra herbs are defined as stem of Ephedra sinica , Ephedra intermedia and Ephedra equisetina in the Korean Pharmacopoeia. It is important to use pure herbs to derive the safety and efficacy of herbal medicine. However, the identification of these herbs by conventional taxonomic methods is difficult. Recently, many studies have applied these DNA barcoding for the identification of herbal medicinal species using standard DNA markers. In this study, we report a case study in which the identification of Ephedra species was done by DNA barcoding. For identification of Ephedra species, 17 samples were collected, and a reference DNA barcode library was developed using 6 markers (rbcL, matK, ITS2, ycf1, ycf3, and rpoC2). To develop KASP-SNP markers, we selected 4 markers (ycf1, ycf3, rpl2, and rbcL), which were able to distinguish three Ephedra species. In the result, the specific markers for each of the three Ephedra were clustered into FAM-positive section, whereas non-targeted plants were clustered either HEX-positive or negative section. Therefore, we have developed KASP assay that allow rapid and easy Ephedra species identification using three KASP markers.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.23 no.3
• /
• pp.163-171
• /
• 2023

Background: Surgical extraction of impacted mandibular third molars is the most common procedure performed by oral surgeons. The procedure cannot be performed effectively without achieving profound anesthesia. During this procedure, patients may feel pain during surgical bone removal (at the cancellous level) or during splitting and luxation of the tooth, despite administration of routine nerve blocks. Administration of intraosseous (IO) lignocaine injections during third molar surgeries to provide effective anesthesia for pain alleviation has been documented. However, whether the anesthetic effect of lignocaine is the only reason for pain alleviation when administered intraosseously remains unclear. This conundrum motivated us to assess the efficacy of IO normal saline versus lignocaine injections during surgical removal of impacted mandibular third molars. The aim of this study was to assess the efficacy of IO normal saline as a viable alternative or adjunct to lignocaine for alleviation of intraoperative pain during surgical removal of impacted mandibular third molars. Methods: This randomized, double-blind, interventional study included 160 patients who underwent surgical extraction of impacted mandibular third molars and experienced pain during surgical removal of the buccal bone or sectioning and luxation of the tooth. The participants were divided into two groups: the study group, which included patients who would receive IO saline injections, and the control group, which included patients who would receive IO lignocaine injections. Patients were asked to complete a visual analog pain scale (VAPS) at baseline and after receiving the IO injections. Results: Of the 160 patients included in this study, 80 received IO lignocaine (control group), whereas 80 received IO saline (study group) following randomization. The baseline VAPS score of the patients and controls was 5.71 ± 1.33 and 5.68 ± 1.21, respectively. The difference between the baseline VAPS scores of the two groups was not statistically significant (P > 0.05). The difference between the numbers of patients who experienced pain relief following administration of IO lignocaine (n=74) versus saline (n=69) was not statistically significant (P > 0.05). The difference between VAPS scores measured after IO injection in both groups was not statistically significant (P >0.05) (1.05 ± 1.20 for the control group vs. 1.72 ± 1.56 for the study group) Conclusion: The study demonstrates that IO injection of normal saline is as effective as lignocaine in alleviating pain during surgical removal of impacted mandibular third molars and can be used as an effective adjunct to conventional lignocaine injection.

• Journal of the Korea Computer Graphics Society
• /
• v.29 no.5
• /
• pp.1-9
• /
• 2023

The control technology of animatronics is an interesting topic explored in various fields, including engineering, medicine, and art, with ongoing research efforts. The conventional method for controlling the movement of animatronics is to use electric motors installed inside the body. However, this method is difficult to apply when expressing a narrow space inside the body. In this study, a method of using external forces instead of installing mechanical devices inside the body was proposed to control the movement of a thin and long tentacle organism. Specifically, in this study, the joint body of animatronics was made of magnetic metal material so that it could be affected by the force of an externally installed electromagnet. The strength of the electromagnet was controlled by a PID controller to enable real-time control of the position of the animatronics body. In addition, the magnet was made to rotate, and the speed of rotation was changed to create various movements. Through virtual environment simulations, our experiments demonstrate the superiority of the proposed method, showcasing real-time control by users and the creation of animations in various styles.

• Journal of the Korean Society of Radiology
• /
• v.17 no.7
• /
• pp.1091-1097
• /
• 2023

Bolus is used in radiation therapy to prescribe an even dose to the tumor when the skin surface is inclined or has irregularities. At this time, the dose to the skin surface increases. Due to the patient's unique body structure and irregular skin, voids may occur between the bolus and the skin, which may reduce the accuracy of treatment. Therefore, in this study, the existing bolus and the self-produced bolus through 3D printing were applied to the nasal area, and the difference between the surface dose after treatment plan and the dose directly measured with an Optically Stimulated luminescence(OSL) dosimeter was compared to the existing bolus. The bolus rate was 97%, PLA 100.33%, ePETELA 75A 100.53%, and ePETELA 85A 100.36%. It was confirmed that there was little error in the measurement values and treatment plan values for each material. In addition, compared to when applying a conventional bolus, a difference of -3% to +0.5% for a 3D printed bolus can be confirmed, so a customized bolus produced through 3D printing can complement the shortcomings of the existing bolus. It is believed that there will be.