• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.158-159
• /
• 2003

In four-wave-mixing wavelength converter, we investigated the performance through simulation by using VPI tool, changing the input signal power and CW power at 2.SGb／s. Controlling optimal CW power to each input signal power, we extended the input signal power range to 20dB, which guarantees the minimum power penalty.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.680-683
• /
• 1999

A thyristor controlled shunt compensator, which is installed in the middle of the transmission line is adopted for controlling real power flow in a simple power transmission system. By means on the Fourier series representation of the thyristor switching action and the system parameters, the thyristor current equations are derived, which transmit the required real power of the simple power transmission system and inform the thyristor firing angle, the thyristor conduction angle, the power flows and the harmonic characteristics EMTP simulations at the various operating points show the dynamic characteristics of the thyristor controlled shunt compensator and correspond to the results calculated with the Fourier series representation.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권2호
• /
• pp.83-88
• /
• 1999

Series connection of power semiconductor devices is selected in high voltage and high power applications. It is important to prevent the overvoltage from being induced across a device above ratings by the proper voltage balancing in the field of IGBT series connection. In addition, the overvoltage induced by a stray inductance has to be limited in the high power circuit. This paper proposes a new gate control scheme which can balance the voltage properly and limit the overshoot by controlling the slope of collector voltage under the turn-off transient in the series connected IGBTs. The proposed gate control scheme changes the slope of collector voltage by sensing the collector voltage and controlling the gate signal actively. The new series connected IGBT gate driver is made and its validity is verified by the experimental results for series connected IGBT circuit.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.823-824
• /
• 2006

The Freelz is an EMG (ElectroMyoGraphy)-based controller for the tetraplegic utilizing a power wheelchair by teeth-clenching. The EMG signals activated by teeth-clenching are acquired around user's temples. The controller contains hardwares and softwares for acquiring EMGs, classifying patterns, and controlling a power wheelchair. Also, a comparison test is executed with a conventional controlling method for the tetraplegic.

• 대한전기학회논문지
• /
• 제31권11호
• /
• pp.125-132
• /
• 1982

This paper analyzes the transient control characteristics of power system by dynamic braking. This method, one type of network switching, employs the injection of controllable shunt resistors at or near the generator bus after the disturbances. First, the power system is simulated mathematically for applying the dynamic braking. And the electrical transient control characteristics are considered by controlling the brake size and insertion time. Second, the mechanical torque of turbine-generator is calculted for the mechanical characteristics. This analysis results show that the electrical characteristics are improved but the turbine-generator shaft is impacted by brake switching. However, these problems can be solved by controlling the brake dynamically.

• Structural Engineering and Mechanics
• /
• 제78권1호
• /
• pp.87-102
• /
• 2021

Long span cross-rope suspension structure is an innovative structural system evolved from typical Cross-Rope Suspension (CRS) guyed tower, a type of supporting system with short span suspension cable supporting overhead power transmission lines. In mountainous areas, the span length of suspension cable was designed to be extended to hundreds or over one thousand meters, which is applicable for crossing deep valleys. Vortex Induced Vibration (VIV) of overhead power transmission lines was considered to be one of the major factors of its fatigue and service life. In this paper, VIV and its controlling by Stockbridge damper for long span CRS was discussed. Firstly, energy balance method and finite element method for assessing VIV of CRS were presented. An approach of establishing FE model of long span CRS structure with dampers was introduced. The effect of Stockbridge damper for overall vibration of CRS was compared in both theoretical and numerical approaches. Results indicated that vibration characteristics of conductor in long span CRS compared with traditional tower-line system. Secondly, analysis on long span CRS including Stockbridge damper showed additional dampers installed were essential for controlling maximum dynamic bending stresses of conductors at both ends. Moreover, factors, including configuration and mass of Stockbridge damper, span length of suspension cable and conductor and number of spans of conductor, were assessed for further discussion on VIV controlling of long span CRS.

• 대한전자공학회논문지SD
• /
• 제44권11호
• /
• pp.51-55
• /
• 2007

PLC 홈 네트워크용으로 보급되고 있는 스위치, 콘센트, 가스제어기 등의 단말기들은 일반적으로 부하가 연결되지 않은 상태에도 원격제어 또는 기기 간의 제어, 상태 감시 등을 위하여 항상 Wake-up 상태를 유지하고 있어야 한다. 이로 인하여 대기 시 불필요한 전력을 소비하는 문제점을 갖고 있다. 본 논문에서는 대기 시 소비 전력 및 동작 시 소비 전력을 최소화한 절전형 PLC 2구 스위치를 개발하였다. 대기 시 소비전력 최소화를 위해 Sleep Mode 전환 및 전력선 통신부와 제어부의 분리 등 회로를 개선을 하였으며 동작 시 소비전력 최소화를 위해 유지 제어방식에서 순간 제어방식으로 전환하였으며, 이로부터 스위치 수명 연장 및 고장률을 최소할 수 있었다. 기존 스위치에 비해 대기 시 약 0.95[W] 절감, 동작 시 약 3.2[W] 절감으로 에너지 절감을 실현하였다.

• 전력전자학회논문지
• /
• 제13권2호
• /
• pp.103-109
• /
• 2008

본 논문은 무전극램프의 조광제어에 관한 안정기 설계방법을 제안하였다. 주파수 가변을 통한 전력제어는 램프의 등가 임피던스를 나타내는 유도코일간의 결합계수, 플라즈마 저항은 전력에 대한 함수이기 때문에 부적합하다. 따라서 본 논문은 직류링크전압을 가변함으로서 램프 임피던스와 독립적으로 램프의 출력 전력을 제어함으로서 무전극램프를 조광제어 하였다. 직류 링크 전압 가변방법은 벅 컨버터에 의해 제어하였으며, 제안된 설계 방법의 시뮬레이션과 실험 결과를 통하여 논문의 타당함을 증명하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.113-116
• /
• 2015

본고에서는 블루투스 프로토콜을 이용해서 무선전력전송을 제어하는 시스템에 대해서 기술하였다. 블루투스는 근거리에서 데이터, 음성 신호 등 송수신하기 위해 많은 분야에서 다양하게 응용되어 왔다. 그러나 최근에는 전송 데이터량이 적은 센서 제어 신호를 저전력으로 처리할 수 있는 기존 블루투스 프로토콜보다 단순한 구조의 블루투스 저에너지 프로토콜이 표준화되어 의료, 가전 등 생활과 밀착된 응용에 많이 사용되고 있다. 또한 무선전력 전송시스템에서도 제어를 위해 표준으로 채택되었다. 본고에서는 특히 블루투스 저에너지 프로토콜을 이용해서 무선전력전송시스템을 제어하는 기술에 대해서 분석하고 기술하였다.

• 제어로봇시스템학회논문지
• /
• 제4권3호
• /
• pp.321-328
• /
• 1998

When we control the level of the steam generator in the nuclear power plants, a swell and shrink arises from many disturbances such as feed water rate, feed water temperature, main steam flow rate, and coolant temperature. If we use the conventional type of PI controller in this system, we will not have stability during controlling at lower power, the removal function of disturbances, and a load follow-up control effectively. In this paper, we study the application of a 2-Degree of Freedom(2-DOF) PID controller to the level control of the steam. generator of nuclear power plants through the simulation and the experimental steam generator. We use the parameters $\alpha$, $\beta$, $\gamma$ of the 2-DOF PID controller for the removal of disturbances and the parameters Kp,Ti,Td of the conventional type of PID controller for controlling setpoint. The back-propagation learning algorithm of neural network is used for tuning the 2-DOF PID controller. We can find satisfactory results of the removal of the disturbances and the tracking function in the change of setpoint through the simulation and experimental steam generator.