• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.246-248
• /
• 2005

The Controller Area Network (CAN) is being widely used for real-time control application and small-scale distributed computer controller systems. However, CAN may exhibit unfair behavior under heavy traffic conditions. When there are both high and low priority messages ready for transmission, the proposed precedence priority filtering method allows one low priority message to be exchanged between any two adjacent higher priority messages. In this way, the length of each transmission delays is upper bounded. These procedures are implemented as local controllers for the ISHURO (Inha Semyung Humanoid RObot).

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.175-177
• /
• 2006

최근 네트워크를 이용한 제어 시스템은 기존의 중앙집중식 제어방식을 벗어나 점차 분산형 제어 방식을 이용하고 있다. 이는 흔히 필드 버스라 일컫는 분산형 제어방식이 여러 가지 장점을 가지고 있기 때문이다. 특히 CAN(Controller Area Network)는 차량내의 Wiring Harness의 공간과 중량을 덜 차지하고 Controller 간의 빠르고 안정적이며 내구성이 우수한 차량 내 네트워크 프로토콜로 주로 사용되고 있다. 본 논문에서는 CAN 프로토콜을 이용하여 차량 HVAC FAN의 엑추에이터로 사용되는 DC Motor의 속도 제어를 수행하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.673-676
• /
• 2002

Real time communication is very important in factory automation system using FieldBus. In this paper, we Propose the method to drive dual motors with one controller using CAN In traditional induction motor control technique, two independent Inverters are used to drive dual motors independently. In this case, two controllers are needed. Our proposed dual motors control scheme which use only one microprocessor has many advantages in the view of economic and performance compared to conventional technique.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.308-310
• /
• 2006

DeviceNet은 Rockwell/Allen-Bradley에서 개발된 응용계층으로 CAN(controller area network)을 기반으로 한 저가의 통신 링크이며 단순한 산업용 디바이스(sensors, actuators)와 상위 디바이스(controller)를 연결하는 하위 레벨의 네트워크이다. 본 논문에서는 2대의 전동기를 마스터, 슬레이브 형식으로 실시간 동특성을 만족할 수 있는 동기제어 알고리즘을 개발하고 이를 DeviceNet을 이용하여 실시간으로 제어할수 있는 복수 전동기 구동시스템을 구현하고자 한다. DeviceNet 마스터는 Hilscher사(社)의 DeviceNet Card(CIF50-DNM)를 PC에 장착되어 구현하고 슬레이브는 Atmel사(社)의 AVR칩(AT90CAN128)을 이용하여 설계하였다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 춘계학술대회
• /
• pp.259-266
• /
• 2005

In this paper, we developed a vehicle condition monitoring system that checks vehicle conditions, and transmits and displays them to a driver for safety and effective maintenance. We used a CAN controller and transceiver to establish the CAN communication that has been used commonly inside an actual vehicle for the collection of vehicle's status information. To validate the operation of the developed system, we have confirmed the accuracy and stability of data transmission and reception of vehicle information.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.741-746
• /
• 2001

This paper presents an investigation of a vehicle-to-vehicle distance control using a Hardware-in-the-Loop Simulation(HiLS) system. Since vehicle tests are costly and time consuming, how to establish a efficient and low cost development tool is an important issue. The HiLS system consists of a stepper motor, an electronic vacuum booster, a controller unit and two computers which are used to form real time simulation and to save vehicle parameters and signals of actuator through a CAN(Controller Area Network). Adoption of a CAN for communication is a trend in the automotive industry. Since this environment is the same as that of a real vehicle, a distance control logic verified in laboratory can be easily transfered to a test vehicle.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.183-183
• /
• 2007

Bimodal Tram is a new public transportation system combined subway with bus and consists of variable electric equipment to accomplish the comfortness, reliability, safety and so on. One of them is VCU(Vehicle Control Unit) for Performing driver's cmmand and monitoring the state of other equipment. To lessen the wiring and the interference of outer electromagnetic noises is very important things for bimodal tram with complicated configuration of electric equipments. This paper has investigated the application of CAN(Controller Area Network) communication method for VCU which has display, central unit and several nodes that are connected with other electric equipments(HVAC, door controller etc). We designed and manufactured the prototype of VCU which eventually will be installed on bimodal tram being developed in KRRI at present.

• 정보보호학회지
• /
• 제33권4호
• /
• pp.47-55
• /
• 2023

자동차 산업에서 전자제어장치 (Electronic Controller Unit, ECU)를 활용한 혁신으로 운전자들은 안전하고 편리한 운전경험을 누리고 있다. 그러나 이와 동시에, 차량 내부 ECU 간의 통신을 지원하는 CAN (Controller Area Network)을 대상으로 한 악의적인 침입과 사이버 공격의 위협 역시 증가하고 있다. 이러한 문제에 대응하기 위해 많은 연구가 진행 중이며, 특히 자동차 침입 탐지 시스템 (Intrusion Detection System, IDS)의 발전이 주목받고 있다. 그러나 대부분의 IDS는 주로 공격을 탐지하는 데 집중되어 있으며, 실제 악의적인 메시지를 전송한 ECU를 정확히 식별하는 데에는 한계점이 있다. 악의적인 ECU를 식별하는 기술은 공격 ECU를 격리시키거나 펌웨어 업데이트 등의 보안 패치를 적용하는데 필수적인 기술이다. 본 고에서는 현재까지 제안된 CAN에서의 악의적인 ECU를 식별하기 위한 기술들에 대해 살펴보고, 비교 분석 및 한계점에 대해 분석하고자 한다.

• 제어로봇시스템학회논문지
• /
• 제12권6호
• /
• pp.614-620
• /
• 2006

Today the automobile has been changed from a mechanical system to an electronic control system fly the development of the electronic technology. In the automobile body, most of these electronic control devices are networked and managed fully by the CAN protocol. But, when a network system is overloaded, unexpected transmission delay for relative low priority objects occurs due to the static priority definition of the CAN protocol. To resolve this problem, this paper proposes a dynamic precedence queue mechanism that creates a queue for the low priority object and its relevant objects to be transmitted, which becomes urgent in an overloaded network system to keep the maximum allowable time delay. For the generated queue, the highest priority is assigned to transmit the queued objects within the shortest time. The mechanism is implemented in the logical link layer of CAN, which does not require any modification of the old CAN hardware. Effectiveness of the proposed mechanism is verified by the real experiments with an automobile network system.

• 한국시뮬레이션학회논문지
• /
• 제10권4호
• /
• pp.11-20
• /
• 2001

In the IMT-2000 networks, the model of micro/pico cell is suggested for transmission of multimedia service. Hence, the efficient method is required for processing of mobile calls in micro/pico cell. In the central urban area, mobile calls may be dynamically increased because of many mobile users. And microcel]/picocell size has small size, handover calls will be more increased. Therefore, many of mobile calls is occurred at a cell in the central urban area, so channel requests for these calls will be increased in the call. In this paper, we propose a scheme, FTC(Fault Tolerant Channel allocation) which is the channel management method for hard handover and new call in a mobile cell of central urban area. When available channels in the cell are consumed, the FTC investigates channel states of neighbor cells in the RNC(Radio Network Controller) or BSC (Base Station Center), and provide available channel for mobile call. The ]no scheme is analyzed and compared with existing channel management method by simulation.