• Journal of the Korea Society of Computer and Information
• /
• v.28 no.11
• /
• pp.113-123
• /
• 2023

This paper introduces the Cherry system, a user-independent blockchain donation system. This is a procedure that is delivered to the beneficiary's bank account through a virtual account when a donor makes a donation, so there is no difference from the existing donation delivery method from the user's point of view However, within the blockchain, Cherry Points, a virtual currency based on the user ID, are issued and delivered to the beneficiary, while all transactions and the beneficiary's usage history are managed on the blockchain. By adopting this method, there was an improvement in blockchain performance, with transaction processing exceeding 1,000 TPS in typical transaction condition and service completion within 21.3 seconds. By applying the automatic influence control algorithm to this system, the influence according to stake, which is an individual donation, is greatly reduced to 0.3 after 2 months, thereby concentrating influence could be controlled automatically. In addition, it was designed to enable micro tracking by adding a tracking function by timestamp to the donation ledger for each individual ID, which greatly improved the transparency in the use of donations. From a service perspective, existing blockchain donation systems were handled as limited donation delivery methods. Since it is a direct service in a user-independent method, convenience has been greatly improved by delivering donations in various forms.

• Journal of Internet of Things and Convergence
• /
• v.9 no.6
• /
• pp.93-98
• /
• 2023

In paddy rice farming, water management is a critical task. To suppress weed emergence during the early stages of growth, fields are deeply flooded, and after transplantation, the water level is reduced to promote rooting and stimulate stem generation. Later, water is drained to prevent the production of sterile tillers. The adequacy of water supply is influenced by various factors such as field location, irrigation channels, soil conditions, and weather, requiring farmers to frequently check water levels and control the ingress and egress of water. This effort increases if the fields are scattered in remote locations. Automated irrigation systems have been considered to reduce labor and improve productivity. However, the net income from rice production in 2022 was about KRW 320,000/10a on average, making it financially unfeasible to implement high-cost devices or construct new infrastructure. This study focused on developing an IoT-Based irrigation valve that can be easily integrated into existing agricultural infrastructure without additional construction. The research was carried out in three main areas: Firstly, an irrigation valve was designed for quick and easy installation on existing agricultural pipes. Secondly, a power circuit was developed to connect a low-power Cat M1 communication modem with an Arduino Nano board for remote operation. Thirdly, a cloud-based platform was used to set up a server and database environment and create a web interface that users can easily access.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3543-3548
• /
• 2023

Shutdown chemistry evolution is performed in nuclear power plants at each refueling outage (RFO) to establish safe conditions to open system and minimize inventory of corrosion products in the reactor coolant system (RCS). After hydrogen peroxide is added to RCS during shutdown chemistry evolution, corrosion products are released and are removed by filters and ion exchange resins in the chemical volume control system (CVCS). Shutdown chemistry evolution including RCS clean-up time to remove released corrosion products impacts the critical path schedule during RFOs. The estimation of clean-up time prior to RFO can provide more reliable actions for RCS clean-up operations and transients to operators during shutdown chemistry. Electric Power Research Institute (EPRI) shutdown calculator (SDC) enables to provide clean-up time by Co-58 peak activity through operational data from nuclear power plants (NPPs). In this study, we have investigated the results of EPRI SDC by shutdown chemistry data of Co-58 activity using NPP data from previous cycles and modeled the estimated clean-up time by EPRI SDC using average Co-58 activity of the NPP. We selected two RFO data from the NPP to evaluate EPRI SDC results using the purification time to reach to 1.3 mCi/cc of Co-58 after hydrogen peroxide addition. Comparing two RFO data, the similar purification time between actual and computed data by EPRI SDC, 0.92 and 1.74 h respectively, was observed with the deviation of 3.7-7.2%. As the modeling the estimated clean-up time, we calculated average Co-58 peak concentration for normal cycles after cycle 10 and applied two-sigma (2σ, 95.4%) for predicted Co-58 peak concentration as upper and lower values compared to the average data. For the verification of modeling, shutdown chemistry data for RFO 17 was used. Predicted RCS clean-up time with lower and upper values was between 21.05 and 27.58 h, and clean-up time for RFO 17 was 24.75 h, within the predicted time band. Therefore, our calculated modeling band was validated. This approach can be identified that the advantage of the modeling for clean-up time with SDC is that the primary prediction of shutdown chemistry plans can be performed more reliably during shutdown chemistry. This research can contribute to improving the efficiency and safety of shutdown chemistry evolution in nuclear power plants.

• Korean Journal of Radiology
• /
• v.24 no.4
• /
• pp.294-304
• /
• 2023

Objective: We aimed to investigate whether image standardization using deep learning-based computed tomography (CT) image conversion would improve the performance of deep learning-based automated hepatic segmentation across various reconstruction methods. Materials and Methods: We collected contrast-enhanced dual-energy CT of the abdomen that was obtained using various reconstruction methods, including filtered back projection, iterative reconstruction, optimum contrast, and monoenergetic images with 40, 60, and 80 keV. A deep learning based image conversion algorithm was developed to standardize the CT images using 142 CT examinations (128 for training and 14 for tuning). A separate set of 43 CT examinations from 42 patients (mean age, 10.1 years) was used as the test data. A commercial software program (MEDIP PRO v2.0.0.0, MEDICALIP Co. Ltd.) based on 2D U-NET was used to create liver segmentation masks with liver volume. The original 80 keV images were used as the ground truth. We used the paired t-test to compare the segmentation performance in the Dice similarity coefficient (DSC) and difference ratio of the liver volume relative to the ground truth volume before and after image standardization. The concordance correlation coefficient (CCC) was used to assess the agreement between the segmented liver volume and ground-truth volume. Results: The original CT images showed variable and poor segmentation performances. The standardized images achieved significantly higher DSCs for liver segmentation than the original images (DSC [original, 5.40%-91.27%] vs. [standardized, 93.16%-96.74%], all P < 0.001). The difference ratio of liver volume also decreased significantly after image conversion (original, 9.84%-91.37% vs. standardized, 1.99%-4.41%). In all protocols, CCCs improved after image conversion (original, -0.006-0.964 vs. standardized, 0.990-0.998). Conclusion: Deep learning-based CT image standardization can improve the performance of automated hepatic segmentation using CT images reconstructed using various methods. Deep learning-based CT image conversion may have the potential to improve the generalizability of the segmentation network.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4447-4464
• /
• 2023

This paper focuses on the development of a new computational model of the CNESTEN's TRIGA Mark II research reactor using the 3D continuous energy Monte-Carlo code TRIPOLI-4 (T4). This new model was developed to assess neutronic simulations and determine quantities of interest such as kinetic parameters of the reactor, control rods worth, power peaking factors and neutron flux distributions. This model is also a key tool used to accurately design new experiments in the TRIGA reactor, to analyze these experiments and to carry out sensitivity and uncertainty studies. The geometry and materials data, as part of the MCNP reference model, were used to build the T4 model. In this regard, the differences between the two models are mainly due to mathematical approaches of both codes. Indeed, the study presented in this article is divided into two parts: the first part deals with the development and the validation of the T4 model. The results obtained with the T4 model were compared to the existing MCNP reference model and to the experimental results from the Final Safety Analysis Report (FSAR). Different core configurations were investigated via simulations to test the computational model reliability in predicting the physical parameters of the reactor. As a fairly good agreement among the results was deduced, it seems reasonable to assume that the T4 model can accurately reproduce the MCNP calculated values. The second part of this study is devoted to the sensitivity and uncertainty (S/U) studies that were carried out to quantify the nuclear data uncertainty in the multiplication factor k_eff. For that purpose, the T4 model was used to calculate the sensitivity profiles of the k_eff to the nuclear data. The integrated-sensitivities were compared to the results obtained from the previous works that were carried out with MCNP and SCALE-6.2 simulation tools and differences of less than 5% were obtained for most of these quantities except for the C-graphite sensitivities. Moreover, the nuclear data uncertainties in the k_eff were derived using the COMAC-V2.1 covariance matrices library and the calculated sensitivities. The results have shown that the total nuclear data uncertainty in the k_eff is around 585 pcm using the COMAC-V2.1. This study also demonstrates that the contribution of zirconium isotopes to the nuclear data uncertainty in the k_eff is not negligible and should be taken into account when performing S/U analysis.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.5
• /
• pp.407-428
• /
• 1991

The eastern coastal area having variability of climate is located within Taebaek mountain range and the east coast of Korea. It is therefore ease to cause the wind damages in paddy field during rice growing season. The wind damages to rice plant in this area were mainly caused by the Fohn wind (dry and hot wind) blowing over the Taebaek mountain range and the cold humid wind from the coast. The dry wind cause such as the white head, broken leaves, cut-leaves, dried leaves, shattering of grain, glume discolouration and lodging, On the other hand the cold humid wind derived from Ootsuku air mass in summer cause such symptom as the poor rice growth, degeneration of rachis brenches and poor ripening. To minimize the wind damages and utilize as a preparatory data for wind injury of rice in future, several experiments such as the selection of wind resistant variety to wind damage, determination of optimum transplanting date, improvement of fertilizer application methods, improvement of soils and effect of wind break net were carried out for 8 years from 1982 to 1989 in the eastern coastal area. The results obtained are summarized as follows. 1. According to available statisical data from Korean meteorological services (1954-1989) it is apperent that cold humid winds frequently cause damage to rice fields from August 10th to September 10th, it is therefore advisable to plan rice cultivation in such a way that the heading date should not be later than August 10th. 2. During the rice production season, two winds cause severe damage to the rice fields in eastern coastal area of Korea. One is the Fohn winds blowing over the Taebaek mountain range and the other is the cold humid wind form the coast. The frequency of occurrence of each wind was 25%. 3. To avoid damage caused by typhoon winds three different varieties of rice were planted at various areas. 4. In the eastern coastal area of Korea, the optimum ripening temperature for rice was about 22.2$^{\circ}C$ and the optimum heading date wad August 10th. The optimum transplanting time for the earily maturity variety was June 10th., medium maturity variety was May 20th and that of late maturity was May 10th by means of growing days degree (GDD) from transplanting date to heading date. 5.38% of this coastal area is sandy loamy soil while 28% is high humus soil. These soil types are very poor for rice cultivation. In this coastal area, the water table is high, the drainage is poor and the water temperature is low. The low water temperature makes it difficult for urea to dissolve, as a result rice growth was delayed, and the rice plant became sterile. But over application of urea resulted in blast disease in rice plants. It is therefore advise that Ammonium sulphate is used in this area instead of urea. 6. The low temperature of the soil inhibits activities of microorganism for phosphorus utilization so the rice plant could not easily absorb the phosphorus in the soil. Therefore phosphorus should be applied in splits from transplanting to panicle initiation rather than based application. 7. Wind damage was severe in the sandy loamy soil as compared to clay soils. With the application of silicate. compost and soil from mointain area. the sand loamy soil was improved for rice grain colour and ripening. 8. The use of wind break nets created a mocro-climate such as increased air. soil and water temperature as well as the reduction of wind velocity by 30%. This hastened rice growth, reduced white head and glume discolouration. improved rice quality and increased yield. 9. Two meter high wind break net was used around the rice experimental fields and the top of it. The material was polyethylene sheets. The optimum spacing was 0.5Cm x 0.5Cm. and that of setting up the wind break net was before panicle initiation. With this set up, the field was avoided off th cold humid wind and the Fohn. The yield in the treatment was 20% higher than the control. 10. After typhoon, paddy field was irrigated deeply and water was sprayed to reduce white head, glume discolouration, so rice yield was increased because of increasing ripening ratio and 1, 000 grain weight.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.223-228
• /
• 2017

This study was conducted to investigate the effects of fermented spent mushroom substrates (F-SMS) of Flammulina velutipes on growth performance, carcass traits, and economic characteristics of Hanwoo steers. A yeast strain (Saccharomyces sp. UJ14) and Bacillus strain (Bacillus sp. UJ03) isolated from fresh spent mushroom substrates of Flammulina velutipes were used as probiotics to prepare F-SMS. Twenty-four Hanwoo steers (14 months old) were allocated to three dietary treatments via a randomized block design and were slaughtered at 30 months of age. These treatment groups included Control (TMR), T1 (TMR containing 10% of F-SMS) group, and T2 (TMR containing 30% of F-SMS). Body weight gain was not influenced by the experimental diets. DM and TDN intakes in the finishing period were significantly (p < 0.05) greater in group T1 than in other groups. CP intake was significantly (p < 0.05) greater in group T2 than in other groups during the whole experimental period. Among carcass traits, rib-eye area and back fat thickness tended to increase with F-SMS supplementation. The appearance rate (%) of a meat yield more than grade A was the highest in group T1. The net profits increased by 1.2% and 13.3% in groups T1 and T2, respectively. In conclusion, if a proper feeding program (including feed safety) can be ensured, spent mushroom substrates of Flammulina velutipes can prove to be a highly profitable feed source for Hanwoo steers.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.173-177
• /
• 2015

This experiment was conducted to determined the optimum planting density for the production of high quality bitter gourd (Momordica charantia L.) adapted in spring cultivation with the unheated greenhouse condition. 'Erave' variety was planted at three different planting densities (235, 305, $380plants{\cdot}10a^{-1}$) on March 26. The training method was six lateral vines with pinching the main one. The light intensity was lower in the higher planting density than the lower one. Net photosynthetic rates of the bitter gourd leaves in the higher density were significantly lower (41 to 71%) than the lower one. There was no difference in the fruit characteristics among treatments. But the root weight was heavier in the lower planting density ($235plants{\cdot}10a^{-1}$) as 113.1g than 96.0g of the higher planting density ($380plants{\cdot}10a^{-1}$). The number of the harvested fruit also higher in the lower planting density ($235plants{\cdot}10a^{-1}$) with 60.7 than 39.9 of the higher planting density ($380plants{\cdot}10a^{-1}$). The average fruit weight was the highest in the plot of $305plants{\cdot}10a^{-1}$ as 338.7g and lowest in the lower planting density ($235plants{\cdot}10a^{-1}$) as 285.2g. The total yield of $305plants{\cdot}10a^{-1}$ density was $5,359kg{\cdot}10a^{-1}$, which was higher than $4,068kg{\cdot}10a^{-1}$ of the lower planting density ($235plants{\cdot}10a^{-1}$). Marketable yield was increased by 24% in the planting density of $305plants{\cdot}10a^{-1}$($4,767kg{\cdot}10a^{-1}$) as compared to the lower density in $235plants{\cdot}10a^{-1}$($3,629kg{\cdot}10a^{-1}$) and increased by 13% in the planting density as $380plants{\cdot}10a^{-1}$($4,137kg{\cdot}10a^{-1}$). Therefore, the planting density of bitter gourd was desirable in $305plants{\cdot}10a^{-1}$ density for the higher yield and quality in the protected cultivation.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.2
• /
• pp.9-14
• /
• 1973

In order to find out effects of the generative power of silk worm moth which have been brought up in the high temperature accommodation at their pupa stage. For this specific study, 9 different kinds of male silk worms have been selected as specimen. All those specimen were brought up in the normal temperature at their larvae stage and after the pupation period they have been accommodated in the condition of high temperature for a certain length in accordance with the study programme. Afterwards, those mlae specimen were copulated with Suwon jam 103${\times}$104 which were all brought up in normal conditions. This study was carried out to find the copulation function as well as the ratio of unfertilized eggs(male sterility test). Results of study have been revealed as follows: 1) Although some differences were observed, male pura which have been brought up in the condition of high temperature shown the low rate of unfertilized eggs rather than those were brought up in the normal conpition. 2) In this group the eclosion(emergency) has been found to be poor rather, than those specimen brought up in normal conditions. 3) The copulation function of Moran, Daedong, J124 and C108 specimen were found to be poor than those of Suwon jam. 4) Fertility rate of Moran, Daedong, J124 and C108 was found to be around 65%. This figure is rather lower than what we normally expect. 5) Unfertilized egg ratio of Moran, Daedong and C108 were found to be around 20% if they were brought up in the condition of high temperature for one day from the time of pupation: 40% at 2 days, and 70% at 3 days duration. More than 3 days treatment has shown no progress in the unfertilized egg ratio. 6) One day's treatment for the pupa at the later stage has shown the unfertilized egg ratio of about 10%; 20% at 2 day's treatment, 35% at 3 day's treatment, 40-60% at 4 day's treatment, more than 60% at 5 day's treatment, and the 70% of fertilized egg ratio was only observed when the treatment days come to 7 days. It was understood that the unfertilized egg ratio was high at the antepupa stage rather than that of post-pupa stage. 7) According to the result of observation the sperm in copulatory pouch and seminal receptacle out of the normal female silk worm which have been copulated with the male brought up in the condition of high temperature at their moth stage. The reproduction system found in the control zone has been found to be normal and the sperm is amountful and active in motion while the sperm found in the treatment to be limited in amount and slow in motion. The observation was made within 5 hours from the copulation. 8) According to the result of observation of sperm of seminal receptacles of the female silkworm moth, and according to that observation of sperm in the seminal receptacle in female silkworm moth, the amount of sperm and mobility in the female moth brought up in high temperature were poor comparing that were brought up in normal temperature zone. Some of them are even found to be no trace of such. 9) Appearance and mosle of the copulatory organ of the male silkworm moth was found to be no anatomical change. 10) Testis of the later pupa stage which was brought up in the high temperature was found to be almost net developed to anucleate sperm and they are degenerated at stage of between maturation division and sperm abnormal stage. Mean time at control zone, the formation of anucleate sperm was already observed.

• Korean Journal of Ecology and Environment
• /
• v.34 no.4 s.96
• /
• pp.298-309
• /
• 2001

The purpose of this study was to evaluate the filtering-feeding effect of a freshwater mussel (Corbicula leana) on the phytoplankton communities in two lakes with different trophic conditions between June and September, 2000. Manipulation experiments were conducted with two treatments (the control and mussel addition), and each established in duplicate 10 l chambers. Both ambient nutrient (TN, TP) and chlorophyll-a concentrations were significantly (p<0.01) higher in Lake Ilgam than Lake Soyang. Cyanophytes (Microcystis, Oscillatoria, Lyngbya and Dactylococcopis) consistently dominated algal community in Lake llgam, while flagellated algae (Dinobryon divergence, Mallomonas, Rhodomonas) and cyanophytes (Microcystis)dominated in Lake Soyang. The net exponential death rate ($R\;=\;day^{-1}$) of total phytoplankton in the mussel treatment ranged $1.70{\sim}7.39$ and $0.38{\sim}1.64$ in Lakes Soyang and Ilgam, respectively. Mean filtering rate standardized by mussel AFDW ($ml\;mgAFDW^{1}\;h^{-1}$) was much higher in Lake Soyang ($1.70{\sim}3.06$) than in Lake Ilgam($0.24{\sim}0.88$0.24~o.88). Estimating FR per mussel, 1 mussel filtered $1.6{\sim}7.8\;l$ per day and $1.7{\sim}3.0\;l$ per day in Lakes Soyang and Ilgam, respectively. Based on tile C-flux tobiomass ratio, Corbicula leana consumed $0.8{\sim}4.4$ fold of phytoplankton standing stock in Lake Soyang, and $0.4{\sim}1.6$ fold in Lake Ilgam per day. Mussel feeding resulted in increase of SRP concentration by $30{\sim}50%$, compared with the control. The results of this study suggest that filter-feeding activity of Corbicula leana varies depending on the phytoplankton density and community composition. The high seston consumption rate of Corsicuja Jeaua even in a eutrophic lake suggests that biomanipulation approach using filter-feeding mussels can be used far wate rquality management in small eutrophic reservoirs.