• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.536-543
• /
• 2005

This paper presents the results of experimental investigations on the response control performance of tuned liquid damper(TLD). Steel frame building model is used for the experiments. Shaking table is controled by velocity consol. Experimental variables are mass ratios(${\mu}=mass$ of TLD/mass of structure), shape ratio(depth of water/ length of TLD), number of nets(N) and tuned frequency ratio($f_l/f_s$). Results show that the greater the mass ratio is, the better the control performance is. So, it can be concluded that TLD is able to be used as a device of vibration control in the remodeling of existing buildings that are not designed to resist earthquake

• 한국공간구조학회논문집
• /
• 제22권1호
• /
• pp.25-32
• /
• 2022

The seismic behaviors of the arch structure vary according to the rise-span ratio of the arch structure. In this study, the rise-span ratio (H/L) of the example arch structure was set to 1/4, 1/6, and 1/8. And the installation angle of the seismic isolator was set to 15°, 30°, 45°, 60° and 90°. The installation angles of the seismic isolator were set by analyzing the horizontal and vertical reaction forces according to the rise-span ratio of the arch structure. Due to the geometrical and dynamic characteristics of the arch structure, the lower the rise-span ratio, the greater the horizontal reaction force of the static load, but the smaller the horizontal reaction force of the dynamic load. And if the seismic isolator is installed in the direction of the resultant force of the reaction forces caused by the seismic load, the horizontal seismic response becomes small. Also, as the installation angle of the seismic isolator increases, the hysteresis behavior of the seismic isolator shows a plastic behavior, and residual deformation appears even after the seismic load is removed. In the design of seismic isolators for seismic response control of large space structures such as arch structures, horizontal and vertical reaction forces should be considered.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권3호
• /
• pp.465-479
• /
• 2020

Objective: This study performed a meta-analysis of published trials to determine the effects of zinc on the immune response and production performance of broilers. Methods: A database was built from published literature regarding the addition of zinc forms or doses and their relation to the immune response and production performance of broilers. Different doses or forms of zinc were identified in the database. The recorded parameters were related to the immune response and production performance. The database contained a total of 323 data points from 41 studies that met the criteria. Then, the data were processed for a meta-analysis using a mixed model methodology. The doses or different forms of zinc were considered fixed effects, different studies were treated as random effects, and p-values were used as the model statistics. Results: An increase in zinc dose increased (p<0.05) pancreas metallothionein (MT) and zinc concentrations in the plasma, tibia and meat, all in quadratic patterns, but linearly decreased (p<0.05) the heterophil/lymphocyte (H/L) ratio. Regarding the different zinc forms, both inorganic and organic zinc increased (p<0.05) the zinc concentrations in the plasma and tibia, the calcium and phosphorus contents in the tibia, and the antioxidant activity of superoxide dismutase in meat as compared to control. An increase in zinc dose increased average daily gain (ADG) and decreased feed conversion ratio (FCR) following a quadratic pattern (p<0.05). Inorganic and organic zinc decreased (p<0.05) FCR and H/L ratio than that of control, but these two forms were similar for these parameters. Conclusion: Zinc addition has a positive impact on immunity and broiler production. Zinc can suppress stress and inhibit the occurrence of lipid peroxidation in broilers, and it can also improve ADG, FCR, and the quality of broiler carcasses.

• 한국공간구조학회논문집
• /
• 제11권2호
• /
• pp.81-88
• /
• 2011

구조물에 대한 진동제어 기술은 지금까지 일반 라멘구조물을 대상으로 하여 많은 연구가 이루어져 왔다. 공간구조물은 일반 라멘구조물과는 다른 동적응답특성을 가지고 있기 때문에 일반 라멘구조물을 대상을 개발된 진동제어 기술을 공간구조물에 적용시키기에는 불확실한 요소가 존재하게 된다. 본 논문은 대공간구조물 중에서 자중이 비교적 커서 지진응답이 크게 나타나는 트러스 형태의 아치 구조물을 대상으로 하여 수동형 TMD 설치 위치 및 질량비에 따른 제어성능을 분석하였다. 예제 아치구조물의 TMD 설치 위치에 따른 진동응답 분석결과, 모드벡터가 가장 큰 위지에 TMD를 설치하는 것이 가장 제어성능이 우수한 것으로 나타났다. 또한 TMD 의 질량비 변화에 따른 진동응답 분석결과, 질량비가 약 2%인 경우에 가장 효율적인 것을 확인 할 수 있었다.

• 한국간호교육학회지
• /
• 제14권2호
• /
• pp.273-281
• /
• 2008

Purpose: This study was performed to investigate the effects of aromatherapy on headache, stress and immune response of students with tension-type headache. Method: This study employed a two-group pre-post test study design. Data was collected from 44 subjects. Twenty-two subjects were assigned to the experimental group and received aromatherapy massage every other day for 3 weeks, but the other 22 subjects were in the control group and did not receive any intervention. Experiment had been conducted from Apr. 9 through Aug. 25, 2001 and intensity of headache, stress response (serum cortisol, life stress) and immune response(T-cell and natural killer cell ratio) were measured in the course of aromatherapy for both experimental group and control group. Data were analyzed by using $X^2$-test, t-test, Paired t-test and repeated measures ANOVA. Result: Headache scores, serum cortisol levels and life stress scores were significantly decreased in the experimental group after treatment compared to the control group. Conclusion: These findings is suggested that the aromatherapy could be an effective nursing intervention in relaxing and relieving the pain caused by tension-type headache for students.

• 한국소음진동공학회논문집
• /
• 제18권11호
• /
• pp.1185-1191
• /
• 2008

This paper presents an approach to define an optimal piezoactuator length to actively control structural vibration. The optimal ratio of the piezoactuator length against the beam length when a pair of piezoceramic actuator and accelerometer is used to suppress unwanted vibration with direct velocity feedback(DVFB) control strategy is not clearly defined so far. It is well known that DVFB control can be very useful when a pair of sensor and actuator is collocated on structures with a high gain and excellent stability. It is considered that three different collocated Pairs of piezoelectric actuators (20, 50 and 100 mm long) and accelerometers installed on three identical clamped-clamped beams($30{\times}20{\times}1mm$). The response of each sensor-actuator pair requires strictly positive real(SPR) property to apply a high feedback gain. However the length of the piezoactuator affects the SPR property of the sensor-actuator response. Intensive simulation and experiment show the effect of the actuator length variation is strongly related with the frequency range of the SPR property. Thus an optimal length ratio was suggested to obtain relevant performance with a good stability under the DVFB strategy.

• Structural Engineering and Mechanics
• /
• 제3권5호
• /
• pp.497-509
• /
• 1995

Effectiveness of multiple tuned mass dampers (MTMD) in suppressing the dynamic response of base excited structure for first mode vibration is investigated. The effectiveness of the MTMD is expressed by the ratio of the root mean square (RMS) displacement of the structure with MTMD to corresponding displacement without MTMD. The frequency content of base excitation is modelled as a broad-band stationary random process. The MTMD's with uniformly distributed natural frequencies are considered for this purpose. A parametric study is conducted to investigate the fundamental characteristics of the MTMD's and the effect of important parameters on the effectiveness of the MTMD's. The parameters include: the fundamental characteristics of the MTMD system such as damping, mass ratio, total number of MTMD, tuning frequency ratio, frequency spacing of the dampers and frequency content of the base excitation. It has been shown that MTMD can be more effective and more robust than a single TMD with equal mass and damping ratio.

• 전기학회논문지P
• /
• 제51권2호
• /
• pp.68-76
• /
• 2002

This paper presents an implementation of high-dynamic performance control system of Reluctance Synchronous Motor (RSM) drives for an industrial servo system with direct torque control (DTC). The problems of DTC for high-dynamic performance and maximum efficiency RSM drives are the nonlinear variable flux and inductance due to a saturated stator linkage flux and nonlinear inductance curve with various load currents. The accurate estimation of the stator flux and torque are obtained using stator flux observer of which a saturated inductance Ld and Lq can be compensated by using the adapted neural network from measuring the modulus and angle of the stator current. To obtain fast torque response and maximum torque/current with varying load current, the reference command flux is ensured by imposing Ids=Iqs. This control strategy is proposed to fast response and optimal efficiency for RSM drive. In order to prove rightness of the suggested control algorithm, we have some actual experimental system using 6000 pulse/rev encoder at ${\pm}10$ and ${\pm}1500rpm$. The developed digitally high-performance control system are shown some good response characteristics of control results and high performance features using 1.0kW RSM of which has 2.57 Ld/Lq salient ratio.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.49-58
• /
• 1997

In this paper, a transfer function was obtained for a PWM high speed solenoid valve controlled metal belt CVT system. The transfer function was defined as the ratio of speed ratio to PWM duty ratio and derived in time domain by linear regression analysis from the experimental results. The transfer function obtained showed different dynamic characteristics for the up and down shift. Also, LQG/LTR controller was designed for the CVT system using the transfer function. It is seen from the experimental results that LQG/LTR control showed good performance for the speed ratio tracking and disturbance rejection. The phase difference and relatively slow response are considered due to the inaccuracy os the transfer functions, which resulted from the inherent nonlinearities of the transmission characteristics of the metal belt CVT.

• 한국기계가공학회지
• /
• 제6권2호
• /
• pp.59-66
• /
• 2007

Voice coil actuator is used linear motion system that requires precision positioning control. In order to control precision positioning of voice coil actuator, relation model between duty ratio and moving displacement of voice coil actuator is needed. This paper present a duty ratio - displacement model in PWM control of voice coil actuator. Transfer function of voice coil actuator is obtained by combining voice coil motor's equation of motion with the equation of circuit and characteristic of voice coil motor. Consider to initial condition of velocity and current, transfer function is transformed mathematical model. The induced model can predict output displacement, velocity and current according to duty ratio and amplitude. The model is verified by experimental tests such as velocity and displacement response of voice coil motor. Simulated results have tracking errors of less than 10 percent of experimental results.